Network & Communication

Switch between four servers from a single console. To expand your switching platform to include additional servers, simply cascade units in a master-slave configuration. Cascade up to 16 servers with the 4-port model. The ServSwitch KV9204A KVM Switch is plug-and-play, so you can add or subtract servers almost as quickly as you can plug and unplug cables.

With the ServSwitch EC KVM Switch for PS/2 and USB Servers and PS/2 or USB Consoles, 8-Port, switch among 8 servers from a single console. To expand your switching platform to include additional servers, simply cascade units in a master-slave configuration. Cascade up to 64 servers with the 8-port model. The ServSwitch EC is plug-and-play, so you can add or subtract servers almost as quickly as you can plug and unplug cables.

This four-port USB KVM switch enables you to access four CPUs with high-resolution DVI video connectors from a single workstation. Set up desktop KVM switching with high-quality DVI-D video. The ServSwitch DT DVI 4-port with USB 2.0 Transparent supports full DVI at resolutions up to 1920 x 1200 at 60 Hz. Plus, you can fine tune the signals, depending on signal strength.

• Supports resolutions up to 1080p (HDTV) or 1920 x 1200 (VESA).
• Enables flexible screen location without compromising video quality.
• HDCP compliant and Blu-ray ready, and supports EDID.
• Transmits serial RS-232 TXD and RXD control signals.
• Includes a transmitter and a wallmountable receiver.
• Auto equalization for extended video range.
• No software or driver installation required.
• Complies with the DVI 1.0 standard.

Put a digital DVI screen up to 330 feet (100 m) from a video source and control a monitor via RS-232 TXD and RXD control signals with this extender.

Extending over a single CAT5e/6/7 cable, the transmitter-receiver combo supports both HDTV resolutions and VESA standards. The extender makes it easy to send digital 1080p-quality video and 2-channel stereo analog audio plus serial RS-232 control signals to a distant screen or projector.

Audio is integrated into the CATx cable extension, so you don't need a separate cable to transmit audio from the source to the screen.

Because the extender supports bidirectional RS-232 control, you can use serial commands from a PC to control RS-232 equipment or turn a remote screen on and off to save energy in your video application.

Plus, the XR DVI-D Extender with Audio, RS-232, and HDCP supports EDID and HDCP bypass, so you can also extend content from a protected-content source.

*Distance depends on the characteristics and quality of the cable and the type of DVI source and display.

Send higher-quality video and audio signals further with this HDMI 2.0 Extender. This extender kit distributes UHD video, audio, RS232 or IR up to 1000 feet (300 meters) over fiber optic cable. The bi-directional RS-232 or IR ports to control AV devices are easy to choose by the slide switch on the rear panels. Control sources and displays from either the transmitter or receiver end using either RS232 or IR signals. The extender supports duplex fiber up to 1000 feet (300 meters).

Extend signals over duplex fiber up to 1000 feet (300 meters) while maintaining:

• Higher resolutions
• Higher frame rates
• Multiple full HD streams in the same pipe
• 21:9 aspect ratio