Surge Suppressors/Protectors

Premium protection for home, corporate, retail, telecom and industrial applications, the EURO-4 Isobar® 4-Outlet 230V Surge Protector features a surge protection rating of 680 joules to defend your sensitive electronics against surges and spikes.

The EURO-R features four widely spaced C13 outlets, which are arranged in two exclusive isolated filter banks that prevent equipment connected to one bank from interacting with equipment connected to the other. These internal barriers also prevent disruptive line noise from causing A/V distortion, computer lock-ups, data errors and similar problems. Large toroidal chokes, ferrite rod-core inductors, HF/VHF capacitors and multiple layers of metal oxide varistors remove EMI/RFI interference and prevent system crashes, reboots and performance problems.

Because residential power outlets have three wires-hot line (H), neutral (N) and ground (G)-the EURO-4 protects all three, covering two protection modes: full normal mode (H-N) and common mode (N-G/H-G).

An integrated 9A circuit breaker protects all outlets and shuts down connected equipment in the event of an overload. A lighted on/off switch provides one-touch control over connected components. A C14 inlet accepts a variety of detachable power cords, such as the included 6-ft. (1.83 m) C13 cable. An all-metal housing ensures long life and durability.

680-Joule Surge Protection for Home or Office Electronics

• Protects your A/V components, network hardware, retail displays, appliances, power tools and other electronics against surges and spikes
• Recommended for home, corporate, retail, telecom and industrial applications requiring AC line protection
• Full normal mode (H-N) and common mode (N-G/H-G) line surge suppression
• Exceeds IEEE 587 Category A and B surge suppression specifications

4 Outlets Accept Wide Range of Electronic Devices

• 4 C13 outlets
• Outlets accommodate up to 2 transformers without blocking other outlets

Isolated Filter Banks Provide Extra Protection

• Outlets arranged in exclusive isolated filter banks to limit noise interaction among connected equipment
• Blocks disruptive EMI/RFI line noise that can cause equipment damage or data loss
• Combines large toroidal chokes, ferrite rod-core inductors, HF/VHF capacitors and metal oxide varistors to block interference

Premium Safety Features

• Lighted on/off switch provides one-touch control over connected equipment
• Automatic shutoff permanently cuts power to outlets if protection circuit is incapacitated, preventing equipment damage and indicating replacement is required

Fits Effortlessly Into Your Workstation

• Detachable 6-ft. (1.83 m) C13 power cord reaches nearby outlets
• C14 inlet accepts wide variety of power cords to match country or site-specific wall outlets
• Keyhole slots on bottom panel provide convenient wall or desk mounting options
• Metal housing designed for long life

Features | In-Line Surge Protector Keeps Your Power Over Ethernet (PoE) Equipment Safe

Ideal for home/corporate security systems, home theaters, trade shows and other digital signage applications, the B110-SP-POE-1 protects connected equipment from damage caused by power surges and electrostatic discharge (ESD). Just connect it between your source and network equipment using Cat5e/6 cables (such as N001-Series cables, sold separately). Note : Two B110-SP-POE-1 surge protectors are required to protect both source and device.

Your Last Defense Against Intruding Voltage Spikes

Solid-state silicon-avalanche diode technology features low clamping voltage, providing superior protection against ESD and super-fast response time under one nanosecond. Both mid-span and end-span PoE are supported. The B110-SP-POE-1 meets the following IEC/EN regulations: IEC 61000-4-2 / IEC 61000-4-5 (ESD) 30kV (Air, Contact) and EN 61000-4-5 5kA (8/20µs) / 4kV (10/700µs).

Ready to Use Right from the Package, So You Can Plug and Play Immediately

This PoE in-line surge protector meets 802.3af and 802.3at IEEE standards, while supporting data transmission speeds up to 1 Gbps. No software or external power supply is required. The compact housing is designed to endure in applications where static discharge is likely to occur. Mounting hardware is included for convenient installation where needed. Be sure the distance between the B110-SP-POE-1 and the equipment it is protecting is no more than 300 feet (91 meters).

TAA-Compliant for GSA Schedule Purchases

The B110-SP-POE-1 is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.

Eaton's Type 1 Surge Protective Device products are UL1449 3rd Edition listed and provide the highest level of surge protection and safety.

Type 1 surge products are permanently connected devices that are installed before or after a main disconnect. These devices can be used as replacements for what were previously known as secondary surge arrestors or lightning arrestors.

Applications Include:

• Loadcenters/Electrical Panels.
• Residential Service Entrances.
• Sump & Irrigation Pumps.
• Control Cabinets.
• Individual Equipment Disconnects.
• Single & Three Phase Motors.
• Outdoor Lighting.
• Garages.
• Farm / Irrigation Control.
• Other Electrical Assemblies.

• Protect Single Split-Phase and Three-Phase WYE configurations.
• Meet the industry's highest Nominal Discharge Current and Short Circuit Current ratings available.
• Provide superior protection for sensitive electronics with low Voltage Protection Rating values.
• Offer a 2 Year Product Warranty

• Commercial grade AC power protection for sensitive electronics.
• Clear, visible LED indication displays protective status of device.
• Can be applied universally to any manufacturer's equipment.
• Optional accessory kit enables wall or din-rail mounting.
• Suitable for indoor/outdoor applications.

Eaton's Type 1 Surge Protective Device products are UL1449 3rd Edition listed and provide the highest level of surge protection and safety.

Type 1 surge products are permanently connected devices that are installed before or after a main disconnect. These devices can be used as replacements for what were previously known as secondary surge arrestors or lightning arrestors.

Applications Include:

• Loadcenters/Electrical Panels.
• Residential Service Entrances.
• Sump & Irrigation Pumps.
• Control Cabinets.
• Individual Equipment Disconnects.
• Single & Three Phase Motors.
• Outdoor Lighting.
• Garages.
• Farm / Irrigation Control.
• Other Electrical Assemblies.

• Protect Single Split-Phase and Three-Phase WYE configurations.
• Meet the industry's highest Nominal Discharge Current and Short Circuit Current ratings available.
• Provide superior protection for sensitive electronics with low Voltage Protection Rating values.
• Offer a 2 Year Product Warranty

• Commercial grade AC power protection for sensitive electronics.
• Clear, visible LED indication displays protective status of device.
• Can be applied universally to any manufacturer's equipment.
• Optional accessory kit enables wall or din-rail mounting.
• Suitable for indoor/outdoor applications.

Eaton's Complete Home Surge Protection Type 2 Devices (CHSPT2 Series) protect your home electronics from the damaging effects of electrical surges. They provide premium surge protection for AC power and cable at the point of entrance to the home. Protection at this location can reduce surges entering the home to an acceptable level for your home electronics and appliances.