Power Injectors/Splitters
-
VisionTek PoE Injector - 230 V AC Input - 55 V DC Output - 1 x Gigabit Ethernet, 1 x Gigabit PoE Output Port(s) - 60 W
BT 1-55 Volt 60 Watt
Dual Signature Injector
Get IEEE 802.3bt Power at a Fraction of the Cost. Upgrade your PoE network with the flexibility and features of the IEEE 802.3bt (60 watts of power per line) for a small group of devices without the expense and hassle of installing a new PoE switch.
Dual Signature Active PoE means Security. Active negotiation means that this injector will negotiate with your device prior to delivering power. This feature means that you can rest assured that your end devices are safe from accidental overpowering. For extra protection, go with the "Surge Protection" Model which includes 6KV surge protection.
Key Features
- Instantly upgrade your network to IEEE 802.3bt PoE++
- Dual Signature Active PoE protects non-PoE devices
- Provides up to 60 watts for one device - use to power PTZ IP cameras, desktop computers, high end APs and more
- "Surge Protection" Model provides 6KV protection for outdoor installations
-
VisionTek Single Port Gigabit Mode A PoE Injector With 48 Volt 15 Watt Output - 48 V DC Output - 1 x Gigabit PoE Output Port(s)
GPOE 1A 48 Volt 15 Watt
Single Port Gigabit Mode A PoE Injector
This compact single port PoE Injector for 802.3af (48 volt) devices fits into the space of a single electrical outlet to provide power for an IP Camera, VOIP Phone, or WiFi Access Point.
Key Features
- Instantly adds power to an Ethernet cable to power one PoE device
- Powers 802.3af devices ( no auto negotiation )
- Passive "always on" power delivers continuous 48 volts
- Power supply included is 48 volts DC, .3 amp, 15 watts
- Mode A operation - power and data on pins 1,2- and 3,6+
- UL,CE, DoE and FCC listings
-
VisionTek PoE Injector - Integrated Single Port Gigabit Mode B PoE Injector With 48 Volt 15 Watt Output - 120 V AC, 230 V AC Input - 48 V Output - 1 Gigabit PoE Input Port(s) - 1 Gigabit PoE Output Port(s) - 15 W
PT GPOE 1B 48 Volt 15 Watt
Single Port Gigabit Mode B PoE Injector
Instantly upgrade your network switch to PoE. Power an IP camera, desktop phone, WiFi access point, or other low voltage 802.3af device through a network data cable using this Passive Power over Ethernet (PoE) injector. A Passive PoE injector always delivers the same voltage as its power source. This injector provides 48 volts, 15 watts of PoE power for devices labeled "802.3af."
Key Features- Instantly upgrades your network to PoE for one device
- Use to deliver PoE power to IP security cameras, phones, wireless access points and other devices that accept passive 802.3af
- Passive "Always On" PoE power delivery for reliable throughput
- 10/100/1000 Gigabit Data Capability
- Mode B power delivery on pins 4,5+ / 7,8-
- Integrated 48 volt 15 watt power supply
-
VisionTek PoE Injector - 4 Port Gigabit Mode A - With 48 Volt 48 Watt Power Supply - 48 V Output - 4 Gigabit PoE Input Port(s) - 4 Gigabit Ethernet Output Port(s) - 48 W
GPOE 4A 48 Volt 48 Watt
Gigabit Mode A PoE Injector
Simplify installations with a multi-port midspan injector. Power up to four IP cameras, desktop phones, WiFi access points, or other low voltage devices through a network data cable using this Power over Ethernet (PoE) injector. A Passive PoE injector always delivers the same voltage as its power source. This injector comes with a 48v UL approved power supply to provide direct voltage to your IEEE 802.3af/at device.
Compatible with IEEE 802.3af with Mode A Negotiation. This midspan meets the IEEE standard negotiation using pins 1,2 / 3,6 to deliver PoE power to your device.
Key Features- Power up to 4 PoE devices in one unit - extend power up to 328 feet
- Passive "Always On" power will continuously deliver power to your device
- Compatible with Passive 802.3af/at PoE devices
- Mode A negotiation on pins 1,2- / 3,6+
- .65A Port Limit
- 10/100/1000 Mbps data operation
- 2.1mm standard DC inputs
- Includes a UL/CE/FCC Rated Power Supply - Total budget 48 watts
- Quality shielded RJ45 ports
- Bright LED status indicators
-
VisionTek PoE Injector - 12 Port Gigabit - Mode A/B - Rack Mount With a 48 Volt 120 Watt Power Supply - 48 V DC Input - 48 V Output - 12 Gigabit PoE Input Port(s) - 12 Gigabit Ethernet Output Port(s) - 120 W - 1U
GPOE 12AB 48 Volt 120 Watt
12 Port Gigabit Injector & Rack Mount
Simplify installations with a multi-port midspan injector. Power up to twelve IP cameras, desktop phones, WiFi access points, or other low voltage devices through a network data cable using this Power over Ethernet (PoE) injector. A Passive PoE injector always delivers the same voltage as its power source. This kit includes a 48 volt, 120 watt power supply to use with IEEE 802.3af PoE devices.
Save big on network upgrades and device installations. Power over Ethernet delivers power 328 feet from the PoE Injector, eliminating the expense and hassle of installing AC power near your powered device.
Compatible Devices
- IP phones like Polycom, Cisco, Yealink
- WiFi Access points
- IP Cameras
- 802.3af devices
- NOTE: All devices receive the same voltage (48 volts) and share power up to 120 watts. Check your device specifications for power needs
- Power up to 12 PoE devices in one unit - extend power up to 328 feet
- Passive "Always On" power will continuously deliver power to your device
- Includes a UL Rated 48 volt, 120 watt power supply
- Compatible with Passive 802.3af PoE devices
- Mode A/B power input options allows for versatile PoE applications
- Input 48 Volts
- .65A Port Limit - up to 31 watts per port with total budget of 120 watts available for all ports
- 10/100/1000 Mbps data operation
- Quality shielded RJ45 ports
- Bright LED status indicators
- 1U Rack Mount
$207.88 -
VisionTek PoE Intel NUC Lid - Power and Data for Gen 7, 8, or 10 NUC with Patch Cables - 1 PoE Input Port(s) - 1 Gigabit Ethernet Output Port(s)
GBT NUC
Lid Accessory
PoE Power and Data Delivery for Intel NUC (Lid Accessory)
Why Power Over Ethernet?
Now you can install your NUC where you need it, regardless of whether or not it will be close to an outlet. The costs and infrastructure required to install traditional AC outlets can drive up your project budgets and extend your schedule. With the GBT-NUC lid, you can use IEEE 802.3bt or uPoE to deliver power and data to your NUC for AV, conferencing or any other application.
Key Features
- Use to deliver power and data to your Intel NUC using one Ethernet cable
- Works with Cisco uPOE and IEEE 802.3bt dual signature PoE
- Maximizes installation by enabling better placement options and reducing installation and building costs
- Compatible with Intel NUC Gen 7, 8 and 10 models
- 10/100/1000 Gigabit Data Rate
- Patch Cables Included
$185.70
