Power Injectors/Splitters

Items 1 to 6 of 13 total

Set Ascending Direction
per page

Grid  List 

Page:
  1. 1
  2. 2
  3. 3
  • Intellinet Network Solutions 1-Port PoE Injector, 48 V DC - IEEE 802.3af Compliant

    Reduce costs by using existing Cat5 cable to provide both power and data

    The Power over Ethernet Injector from Intellinet Network Solutions allows you to connect your IEEE 802.3af-compliant products to a non-PoE LAN switch port. The injector can be used to connect a wireless access point, IP phone, network camera or any IEEE 802.3af powered device (PD) to a switch.

    Reduce Wiring Costs

    No need to run AC power lines for your wireless access point, network camera or IP phone. Simply connect the PoE Injector to the LAN switch port, and use the existing Cat5 cabling to deliver DC power as well as transfer data.

    Preserve Existing Investments

    Does your existing LAN switch not support the new IEEE 802.3af PoE standard? Well, don’t let that stop you from realizing the benefits of delivering DC power over the existing Cat5 Ethernet cabling. Use the Model 503389 PoE Injector until you are able to upgrade your LAN switch to a model that supports the IEEE 802.3af PoE standard.

    Protect Your Equipment

    Now that you are running DC power to your networked equipment through the Cat5 cabling, you need to be sure that the products are protected from power problems. The PoE Injector was designed to protect equipment from short circuits (short GRND), current overloads (over 450 mA) and high voltages (voltage exceeding 52 V).

    Learn More
    $26.29

  • Intellinet Network Solutions PoE+ Splitter, 5, 7.5, 9 or 12 V DC output voltage - IEEE802.3at

    Deliver Power over Ethernet to remote devices

    The Intellinet Network Solutions PoE+ Splitter allows you to deliver both data and electrical power to non-PoE Ethernet-enabled products using the Cat5 Ethernet cable. Using the PoE Splitter, you can take advantage of Power over Ethernet and place Ethernet-enabled products, such as Network Cameras and Wireless Access Points*, where power outlets are not readily available.

    Simplify Installation for an Ethernet-based Device

    Having to manage only an Ethernet cable simplifies the physical installation of the device. Without having to worry about the availability of a power source, you can mount Ethernet-enabled products on a ceiling or outdoors, up to 100m (328 feet)** from a power source. The PoE Splitter is simple to install and requires no tools or software.

    802.3af Compliant Power over Ethernet

    The PoE Splitter can be used to complement any PoE injector unit or midspan switch to provide small to medium-sized businesses a complete end-to-end PoE solution. This unit supports 802.3af and 802.3at, ensuring compatibility with other 802.3af/t PoE-compliant injector units or PSE switches.

    Adjustable Power Output

    During the setup, the PoE Splitter can be set to power any compatible 5 V, 7.5 V, 9 V or 12 V Ethernet-enabled device via the volt selector located on the side.

    ** Maximum distance per 802.3u specifications.

    Learn More
    $50.61

  • Intellinet Network Solutions 1-Port Gigabit High-Power PoE+ Injector, Metal - 1 x 30 W Port, IEEE 802.3at/af Compliant"

    Reduce costs by using existing network cable to provide both power and data

    The Intellinet Network Solutions 1-Port Gigabit High-Power PoE+ Injector allows you to connect your IEEE 802.3af/at-compliant products to a non-PoE LAN switch port. The PoE Injector can be used to connect a wireless access point, IP phone, network camera or any IEEE 802.3af/at-powered device (PD) to a switch. The device has an output power rating of up to 30 watts. That's enough for even power-hungry PoE devices.

    Reduce Wiring Costs

    No need to run AC power lines for your wireless access point, network camera or IP phone. Simply connect the PoE Injector to the LAN switch port, and use the existing Cat5 cabling to deliver DC power as well as transfer data.

    Protect Your Equipment

    Now that you are running DC power to your networked equipment through the Cat5e/6 cabling, you need to be sure that the products are protected from power problems. The PoE Injector was designed to protect equipment from short circuits (short GRND), current overloads and high voltages.

    Learn More
    $62.36

  • Intellinet Network Solutions 1-Port Gigabit Ultra PoE Injector, Plastic - 1 x 60 W Port, IEEE 802.3bt and IEEE 802.3at/af Compliant"

    60 Watts of Power for the Internet of things (IoT)!

    The Intellinet Network Solutions Gigabit High-Power PoE Injector provides up to 60 W using all four pairs of twisted-pair Cat5 or Cat6 cabling to support IoT applications such as lighting, sensors and building automation. Nurse call systems require 30 to 50 watts of power. Point-of-sale card readers & printers need up to 60 watts. Lighting fixtures and controllers require 40 to 50 watts. Thin clients draw up to 50 watts. Ultra PoE standard is an excellent solution for bringing power to these important, critical systems. As many new powered devices enter the market, you'll be ready for them with an Intellinet Network Solutions Gigabit High-Power PoE Injector.

    Full Compatibility with Existing IEEE 802.3af/at PoE Powered Devices

    The Intellinet Network Solutions Gigabit High-Power PoE Injector allows you to connect your IEEE 802.3af/at-compliant products to a non-PoE LAN switch port. The injector can be used to connect a wireless access point, IP phone, network camera or any IEEE 802.3af/at-powered device (PD) to a switch.

    Reduced Wiring Costs

    It's no longer necessary to run AC power lines for your wireless access point, network camera or IP phone. Simply connect the PoE Injector to the LAN switch port, and use the existing Cat5 cabling to deliver DC power as well as transfer data.

    Protect Your Equipment

    Once DC power is connected to your networked equipment through the Cat5e/6 cabling, the Intellinet Network Solutions PoE Injector ensures that your products are protected from power problems like short circuits (short GRND), current overloads and high voltages.

    Wall-mount option

    For full installation flexibility, you can mount the injector on the wall through four built-in fixing points on the back panel.

    Learn More
    $76.03

  • Intellinet Industrial Gigabit High-Power PoE+ Injector, 1 x 30 W Port, IEEE 802.3at/af Power over Ethernet (PoE+/PoE), Metal Housing - 54 V DC Output - 1 x Gigabit Ethernet Input Port(s) - 1 x PoE Output Port(s) - 30 W - Black

    Get power and data over your existing LAN cable.

    The Intellinet Network Solutions Industrial Gigabit High-Power PoE+ Injector connects your IEEE 802.3af/at-compliant products to a non-PoE LAN switch port. The injector can be used to connect a wireless access point, IP phone, network camera or any IEEE 802.3af/at-powered device (PD) to a switch. The device has an output power rating of up to 30 watts, enough for most of the common PoE devices.

    Reduce Wiring Costs

    This smart solution avoids the need to run AC power lines for your wireless access point, network camera or IP phone. Simply connect the PoE Injector to the LAN switch port, and use the existing LAN cabling to deliver DC power as well as transfer data.

    Learn More
    $109.33

  • Intellinet Industrial Gigabit Ultra PoE Injector, 1 x 60 W Port, IEEE 802.3bt/at/af Power over Ethernet (Ultra POE/PoE+/PoE), Metal Housing - 1 x Gigabit Ethernet Input Port(s) - 1 x PoE Output Port(s) - 60 W - Black

    Get power and data over your existing LAN cable.

    The Intellinet Network Solutions Industrial Gigabit High-Power PoE+ Injector connects your IEEE 802.3af/at-compliant products to a non-PoE LAN switch port. The injector can be used to connect a wireless access point, IP phone, network camera or any IEEE 802.3af/at-powered device (PD) to a switch. The device has an output power rating of up to 60 watts, enough even for power-hungry PoE devices.

    Reduce Wiring Costs

    This smart solution avoids the need to run AC power lines for your wireless access point, network camera or IP phone. Simply connect the PoE Injector to the LAN switch port, and use the existing LAN cabling to deliver DC power as well as transfer data.

    Learn More
    $130.16

Items 1 to 6 of 13 total

Set Ascending Direction
per page

Grid  List 

Page:
  1. 1
  2. 2
  3. 3