Power Equipment

Items 25 to 30 of 453 total

Set Ascending Direction
per page

Grid  List 

Page:
  1. 3
  2. 4
  3. 5
  4. 6
  5. 7
  • Eaton Tripp Lite Series SmartPro 1000VA 600W 120V Line-Interactive Sine Wave UPS, AVR - 4 NEMA 5-15R Outlets, Network Card Option, LCD, USB, 1U Rack/Tower - 1U Rack/Tower - AVR - 6 Hour Recharge - 3 Minute Stand-by - 120 V AC Input - 120 V AC Output - 4 x

    1000VA/600W/120V Battery Backup for PC Networks, Security Systems or Digital Signage

    This SmartPro® line-interactive UPS system with AVR provides reliable battery backup and AC power protection against blackouts, brownouts, surges and line noise that can damage valuable electronics or destroy data. The thin, compact SMC1000RT1U is ideal protection for servers, switches, phone systems or Pro AV setups in your small-to-mid-size network closet or computer room where you have a rack with unusual space requirements.

    Reliable Battery Backup Keeps You Operational Through Power Outages

    The field-replaceable, hot-swappable internal battery provides eight minutes of support at half load (300W) and two minutes at full load (600W), allowing you to work through short power failures and giving you enough time to safely save files and shut down your system in case of a prolonged blackout.

    Optional WEBCARDLX Network Interface Offers 24/7 Remote Access for Monitoring and Control

    The optional WEBCARDLX (sold separately) with the latest version of PowerAlert® Device Manager firmware (PADM20) provides enhanced remote management capabilities, including customizable dashboard graphs to fit user preferences. The PADM20 upgrade and Tripp Lite's PowerAlert Element Manager (PAEM) software form a powerful tool for expanding maintenance functions in large installations, including firmware update checks and backup and restoration of device configurations.

    NEMA 5-15R Outlets Protect Your Connected Components

    Four 5-15R outlets provide connected equipment with pure sine wave AC output during blackouts, overvoltages and severe brownout conditions. Power provided by these outlets is filtered to protect connected equipment against damaging surges and line noise.

    Automatic Voltage Regulation (AVR) Corrects Low- and High-Voltage Conditions

    AVR protects your equipment from incremental hardware damage, data loss and performance problems caused by brownouts. The SMC1000RT1U maintains regulated 120V nominal output during brownouts as low as 90V, while keeping the battery fully charged and ready to take over in case of power failure.

    Premium Protection from EMI/RFI Line Noise Helps Your Equipment Perform Better

    This UPS system filters out disruptive electromagnetic and radio frequency interference that can inflict hardware damage or data loss. This EMI/RFI filtering also helps your connected components perform better and last longer.

    Designed for High Efficiency to Help You Save Money and Protect the Environment

    A 98% efficiency rating reduces BTU emissions, energy consumption and, ultimately, your energy costs.

    Learn More

    Regular Price: $945.36

    Special Price $888.64

  • Eaton 2.9kW Single-Phase Monitored PDU with LX Platform Interface, 120V Outlets (24 5-15/20R), L5-30P Plug, 0U Vertical, TAA - Monitored - 24 x NEMA 5-15/20R - 120 V AC - Network (RJ-45) - 0U - Vertical - Rack Mount - TAA Compliant

    The PDUMNV30LX 2.9kW Single-Phase Monitored PDU provides real-time remote monitoring of voltage, frequency and load levels via built-in network connection. Recommended for IT and industrial applications, the vertical PDU features 24 NEMA 5-15/20R outlets with included cord retention brackets to prevent cables from becoming accidentally disconnected. A 10-foot cord with NEMA L5-30P plug connects the PDU to a compatible AC power source, generator or protected UPS.

    The built-in Java-free HTML5-based LX Platform network interface enables full remote access for PDU status monitoring and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities. Protocols supported include IPv4, IPv6, HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP.

    A digital ammeter allows you to monitor power consumption for both breakered load banks, as well as the total load to ensure they remain well below maximum capacity with no danger of overload. The PDU mounts in 0U of space in EIA-standard 19-inch racks using the included toolless mounting buttons or the included rack-mounting brackets. Use the included PDUMVROTATEBRKT kit to install the unit with outlets facing the rear for better airflow or equipment access.

    Features

    Distributes and Monitors Network-Grade AC Power

    • 2.9kW 120V 20A monitored PDU with single-phase input
    • NEMA L5-30P with 10 ft. cord connects to compatible AC power source
    • Firmware upgrades support future product enhancements

    24 NEMA 5-15/20R Outlets Distribute Power

    • Cord retention brackets prevent cables from becoming accidentally disconnected

    Digital Ammeter

    • Reports power consumption for both breakered load banks, plus total output current
    • Supports IP-address self-ID
    • Rotates 180° for easy reading at either angle

    Built-In LX Platform Interface

    • Allows full remote access for power monitoring with email notifications via secure web browser, SNMP, telnet or SSH
    • Supports 10/100 Mbps auto-sensing for communication with an Ethernet network
    • Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities
    • No Java required

    Broad Communications Compatibility

    • Supports IPv4, IPv6, HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP
    • Supports automatic and manual assignment of IP address

    Easy 0U Installation in EIA-Standard 19 in. Racks

    • Mounts vertically using included toolless buttons or rack-mounting brackets
    • Included PDUMVROTATEBRKT allows mounting with rear-facing outlets

    TAA-Compliant

    • Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases

    More from the Manufacturer

    Learn More

    Regular Price: $907.93

    Special Price $853.45

  • Eaton Tripp Lite Series 2400W PowerVerter APS 24VDC 120V Inverter/Charger with Auto-Transfer Switching, Hardwired - 24V DC - 120V AC - Continuous Power:2400W

    Eaton Tripp Lite Series 2400W PowerVerter APS 24VDC 120V Inverter/Charger with Auto-Transfer Switching, Hardwired - 24V DC - 120V AC - Continuous Power:2400W Learn More

    Regular Price: $1,821.46

    Special Price $1,712.17

  • Eaton Tripp Lite Series Power It! Power Strip with 6 Right-Angle Outlets, 15 ft. (4.57 m) Cord, Transparent Switch Cover - NEMA 5-15P - 6 NEMA 5-15R - 15ft

    Tripp Lite's Power It! TLM615NCRA power strip offers reliable, convenient and cost-effective power distribution for appliances, power tools, lighting and other electrical equipment. Includes 6 right-angle NEMA 5-15R outlets, 15-foot AC power cord and keyhole mounting slots. Multi-outlet strip reduces cable clutter and enables the connection of multiple electrical devices to a single AC wall socket. Features rugged metal case to stand up to the most demanding environments, illuminated power switch with transparent cover to prevent accidental shutoff and 15A integrated circuit breaker to prevent dangerous overloads. Lifetime warranty.INPUT/OUTPUT: Input: NEMA 5-15P/Output: 6 NEMA 5-15RELECTRICAL: 120V AC, 50/60Hz, 15A FORMAT: Corded power distribution strip with right-angle outlets

    More from the Manufacturer

    Learn More

    Regular Price: $73.93

    Special Price $69.49

  • Eaton Tripp Lite Series Power It! 9-Outlet Power Strip, 15 ft. (4.57 m) Cord - NEMA 5-15P - 9 NEMA 5-15R - 15ft

    Tripp Lite's Power It! TLM915NC power strip offers reliable, convenient and cost-effective power distribution for appliances, power tools, lighting and other electrical equipment. Includes 9 NEMA 5-15R outlets (including one end-mounted outlet ideal for accommodating a transformer without blocking other outlets), 15-foot AC power cord and keyhole mounting slots. Multi-outlet strip reduces cable clutter and enables the connection of multiple electrical devices to a single AC wall socket. Features rugged metal case to stand up to the most demanding environments, illuminated power switch with transparent cover to prevent accidental shutoff and 15A integrated circuit breaker to prevent dangerous overloads.

    INPUT/OUTPUT: Input: NEMA 5-15P/Output: 9 NEMA 5-15R

    ELECTRICAL: 120V AC, 50/60Hz, 15A

    FORMAT: Corded power distribution strip

    More from the Manufacturer

    Learn More

    Regular Price: $78.13

    Special Price $73.44

  • Eaton Tripp Lite Series Safe-IT UL 2930 Medical-Grade Power Strip for Patient Care Vicinity, 4 Hospital-Grade Outlets, Safety Covers, Antimicrobial, 15 ft. Cord, Dual Ground - NEMA 5-15P-HG - 4 x NEMA 5-15R-HG - 15 ft Cord - 15 A Current - 120 V AC Voltag

    Delivers power to movable plug-connected equipment attached to IV poles, crash carts and other mobile medical devices in patient care vicinities.

    Features | UL 2930 Medical-Grade Power Strip Approved for Patient Care Vicinities
    The PS-606-HGDG features four NEMA 5-15R-HG "green dot" hospital-grade outlets that supply power to medical equipment used inside patient care vicinities, including operating rooms, therapy rooms and imaging environments. It meets UL 2930 standards with a NEMA 5-15P-HG plug that provides redundant ground connection. The innovative input plug eliminates the need for an additional ground wire, which reduces cable clutter, the potential shock risk and risk of tripping to a patient in the event of a ground fault.

    Antimicrobial Protection Helps Provide a Safer, Cleaner and Healthier Work Environment
    The Safe-IT™ power strip is protected by an antimicrobial coating that helps resist the growth of bacteria, viruses, fungi, mold and mildew.

    Premium Safety Features Help Ensure Proper Power Connections
    With no central power switch, this power strip presents no danger of accidental shutoff and cutting off power to essential devices. Resettable 15-amp circuit breakers protect connected equipment against overloads. Four Locking plastic safety covers are included to block access to unused outlets.

    Ready for Installation in Demanding Medical Environments
    The six-foot cord allows positioning the medical device away from a standard NEMA 5-15R duplex wall outlet. Built-in mounting flanges and integrated keyhole slots let you mount the all-metal housing to benches, stands, mobile carts, IV poles or any other areas containing multiple cord-and-plug-connected medical electrical equipment used in patient care vicinities.

    Learn More

    Regular Price: $175.95

    Special Price $165.39

Items 25 to 30 of 453 total

Set Ascending Direction
per page

Grid  List 

Page:
  1. 3
  2. 4
  3. 5
  4. 6
  5. 7