Storage Drives

Data at Rest Security... Simplified

Citadel FIPS-certified self-encrypting drives (SEDs) are the only SSDs to integrate multifactor authentication, pre-boot authentication (PBA), and hardware encryption into a complete, low cost solution.

Powered by Cigent®, our built-in PBA unlocks access to the encrypted operating system or virtual machine on the Citadel C-SEL SED as well as the data stored there. This secured data is encrypted by NSA-approved Advanced Encryption Standard (AES) 256-bit encryption at the hardware level. Once booted, Citadel allows no-overhead, hardware-speed access to encrypted data at the full performance of the system.

Unreadable storage partition protected by non-recoverable key.

Cigent software is tested and validated for use with Citadel C-SEL SEDs.

Requires more than one authentication for access. Multiple authentication methods include password, CAC/PIV smartcard, and PIV-supported Yubikey.

Zero-day ransomware, malware, and software service bypass prevention.

Protected with AES 256-bit encryption and random key generation at the hardware level, ensuring fast file access without any overhead.

Citadel C-SEL SEDs are TAA compliant so they can protect information on government systems.

Citadel C-SEL SEDs meet CMMC, HIPAA, GDPR, GLBA, PCI-DSS, and CCPA requirements.

• FIPS 140-2 certified: The internal flash build has been Independently certified by one of 13 NIST specified laboratories examining the cryptographic modules. Certified by NIST's Cryptographic Module Validation Program (CMVP). For more information, refer to theNIST site.
• NIAP-listedCommon Criteria (CC) SSD forFull Drive Encryption - Encryption Engine Common Criteria (CC) collaborative Protection Profile (cPP)
• Secure Firmware: Solid secure firmware features secure digital signatures and boot-time attestation which help to protect storage devices against low-level attacks.
• Hardware level AES 256-bit encryption with TCG Opal SSC support: the encryption/decryption is performed on device, independent from the host, reducing CPU load.
• Instant Erase: The ability to complete sanitization of all data on the SSD in under 2 seconds, simplifying device retirement or redeployment.
• Conformal Coating as tamper evidence on board for physical security.
• 3rd party key management options include but not limited to are: Absolute Software, CryptoMill, McAfee, Secude, Softex, Sophos, Symantec, Wave Systems and WinMagic. Linux FDE (Full Disk Encryption) key management methods also supported.
• TAA Compliant

The high-speed data transfer capabilities of PCIe Gen 3 x4 technology ensure swift access to large datasets, reducing load times for applications and improving the overall responsiveness of the system.

For businesses prioritizing data security, SSDs with FIPS validation (Federal Information Processing Standards) provide an added layer of protection. These SSDs adhere to stringent security standards, making them suitable for industries handling sensitive information, such as finance or healthcare.

VaultDisk® M2-R is a removable SSD drive for use with Dell systems that have VaultDisk® removable drive support, so no tools are needed to swap the boot drive. The removable SSD creates the ability to cold swap your boot drive in seconds, saving man hours and securing all critical data.

• Move large volume data at blazing fast PCIe Gen 4 speeds
• Use in any workstation, laptop, drone, device, or specialized vehicle equipped with a SHIPS receiving frame
• Robust removability up to 10,000 insertions (compared to the tens of insertions found in competitive alternatives)
• Use in command and control centers and offices
• TAA compliant

The SHIPS storage module is the centerpiece of the SHIPS ecosystem, which is designed to bring robust removability and data transport at NVMe speeds between workstations, desktops, vehicles, aircraft, drones, and tactical systems. No longer do OEMs and integrators need to restrict themselves to legacy drive bay standards for removable NVMe storage.

Data at Rest Security... Simplified

Citadel FIPS-certified self-encrypting drives (SEDs) are the only SSDs to integrate multifactor authentication, pre-boot authentication (PBA), and hardware encryption into a complete, low cost solution.

Powered by Cigent®, our built-in PBA unlocks access to the encrypted operating system or virtual machine on the Citadel C-SEL SED as well as the data stored there. This secured data is encrypted by NSA-approved Advanced Encryption Standard (AES) 256-bit encryption at the hardware level. Once booted, Citadel allows no-overhead, hardware-speed access to encrypted data at the full performance of the system.

Unreadable storage partition protected by non-recoverable key.

Cigent software is tested and validated for use with Citadel C-SEL SEDs.

Requires more than one authentication for access. Multiple authentication methods include password, CAC/PIV smartcard, and PIV-supported Yubikey.

Zero-day ransomware, malware, and software service bypass prevention.

Protected with AES 256-bit encryption and random key generation at the hardware level, ensuring fast file access without any overhead.

Citadel C-SEL SEDs are TAA compliant so they can protect information on government systems.

Citadel C-SEL SEDs meet CMMC, HIPAA, GDPR, GLBA, PCI-DSS, and CCPA requirements.

• Protect systems with a standard removable storage drive for physical security and transport
• TAA Compliant

Data at Rest Security... Simplified

Citadel FIPS-certified self-encrypting drives (SEDs) are the only SSDs to integrate multifactor authentication, pre-boot authentication (PBA), and hardware encryption into a complete, low cost solution.

Powered by Cigent®, our built-in PBA unlocks access to the encrypted operating system or virtual machine on the Citadel C-SEL SED as well as the data stored there. This secured data is encrypted by NSA-approved Advanced Encryption Standard (AES) 256-bit encryption at the hardware level. Once booted, Citadel allows no-overhead, hardware-speed access to encrypted data at the full performance of the system.

Unreadable storage partition protected by non-recoverable key.

Cigent software is tested and validated for use with Citadel C-SEL SEDs.

Requires more than one authentication for access. Multiple authentication methods include password, CAC/PIV smartcard, and PIV-supported Yubikey.

Zero-day ransomware, malware, and software service bypass prevention.

DIGISTOR's FIPS SEDs are listed on the NSA CSfC Component List for hardware full drive encryption, which allows the US Department of Defense, Federal agencies, and critical infrastructure to protect mission critical and classified data using commercial solutions.

Citadel C-SEL FIPS SEDs are NIAP-compliant  (VID #11297), TAA compliant, and have been listed by NIST as FIPS 140-2 L2 certified storage devices with NIST Certificate #4294 , ensuring they meet most stringent cybersecurity standards.

Citadel C-SEL SEDs meet CMMC, HIPAA, GDPR, GLBA, PCI-DSS, and CCPA requirements.

Data at Rest Security... Simplified

Citadel FIPS-certified self-encrypting drives (SEDs) are the only SSDs to integrate multifactor authentication, pre-boot authentication (PBA), and hardware encryption into a complete, low cost solution.

Powered by CipherDrive®, our built-in PBA unlocks access to the encrypted operating system or virtual machine on the Citadel K-MD SED as well as the data stored there. This secured data is encrypted by NSA-approved Advanced Encryption Standard (AES) 256-bit encryption at the hardware level. Once booted, Citadel allows no-overhead, hardware-speed access to encrypted data at the full performance of the system. 

Unlock one SED to authorize access to all SEDs. Perfect for tactical servers and other systems with multiple Citadel K-MD SEDs installed.

All DIGISTOR FIPS SEDs—including Citadel K Series SEDs—are listed on the NSA CSfC Component List for hardware full drive encryption, which allows DoD, Federal agencies, and critical infrastructure to protect mission critical and classified data using commercial solutions. Together with the built-in PBA  which is also CSfC listed for hardware full drive encryption, a Citadel K Series SED constitutes a complete CSfC layer.

All Citadel K-Series SEDs are NIAP-compliant  (VID #11297), TAA compliant, and have been listed by NIST as FIPS 140-2 L2 certified storage devices with NIST Certificate #3926 , ensuring they meet most stringent cybersecurity standards.

Citadel K-MD SEDs are used in Windows and Linux operating systems as well as with SecureView and Forcepoint.

Computer systems that are supported by Citadel K Series Secure SEDs are contained in this hardware compatibility list (HCL).