Transceivers/Media Converters

Use this tough media converter to extend your network over fiber. It supports PoE (IEEE 802.3af) and provides up to 15.4W of power per UTP port. It converts 10/100/1000BASE-T UTP to 1000BASE-X fiber and provides PoE to remote equipment. Because it is Power Sourcing Equipment (PSE), it can link faraway PoE devices via your standard Ethernet cable.

The converter operates in extreme temperatures of -40° to +65° C and is ideal for powering PDs such as security cameras, wireless access points, security cameras, building access devices, and automation equipment in harsh environments. It is especially useful at powering devices in hard-to-reach locations with limited access to AC power outlets, such as ceilings, closets, even the factory floor. The cost of running electrical power to each device is eliminated by sending power over the Ethernet cable.

Because this model has an SFP port, it enables easy adaptability to different fiber types, multimode or single-mode, even Gigabit copper, depending on the SFP transceiver you use.

Other features include link modes, which can propagate link faults from fiber to copper and copper to fiber. A PoE power reset function disables the power output in the case of a link failure on the receiving end. This gives the powered device two seconds to re-initialize.

This compact media converter can be tabletop mounted, wall mounted, or DIN-rail mounted using an optional DIN-rail mounting kit. It can also be mounted on a 1U 19" rackmount shelf.

It supports PoE (IEEE 802.3af) and provides up to 15.4W of power per UTP port. It also converts 10/100/1000BASE-T UTP to 1000BASE-X fiber. Because it is Power Sourcing Equipment (PSE), it can link faraway PoE devices via your standard Ethernet cable.

The converter operates in extreme temperatures of -40° to +65° C and is ideal for powering PDs such as security cameras, wireless access points, security cameras, building access devices, and automation equipment in harsh environments. It is especially useful at powering devices in hard-to-reach locations with limited access to AC power outlets, such as ceilings, closets, even the factory floor. The cost of running electrical power to each device is eliminated by sending power over the Ethernet cable.

Other features include link modes, which can propagate link faults from fiber to copper and copper to fiber. A PoE power reset function disables the power output in the case of a link failure on the receiving end. This gives the powered device two seconds to re-initialize.

These compact media converters can be tabletop mounted, wall-mounted, or DIN-rail mounted using an optional DIN-rail mounting kit. They can also be mounted on a 1U 19" rackmount shelf.

This product is covered by one or more of the following: United States Patent Nos. 7,457,250; 8,902,760; and/or 9,019,838.

Power PoE Devices

The converter supports Power over Ethernet (PoE), so you can power remote devices, such as wireless access points, cameras and more, through standard twisted-pair cable.

Designed for Harsh Conditions Black Box

Industrial Media Converters are designed to perform in the toughest environments on earth. This converter features rigid IP-30 housing that makes it ideal for a range of industrial and outdoor applications.

Easy to Mount

Install this converter however you want. It can be wall mounted or placed on a DIN rail.

Extend LAN Reach

This media converter allows you to add fiber into your existing network infrastructure with ease. Fiber can extend network signals up to distances of 80 kilometers - much farther than the 100-meter limit of CATx cable. This media converter supports super-fast gigabit Ethernet that is certain to meet your business needs.

Supports Link Fault Pass-Through

This media converter has a link fault pass-through feature that simplifies troubleshooting. When one side of the link fails, the other side continues transmitting packets and waiting for a response from the disconnected side.

Convert 10/100/1000BASE-T to 1000BASE-X SFP with Ease
If you need to extend your copper network with fiber, look no further. PoE++ Media Converter easily converts 10/100/1000BASE-T to 1000BASE-X or 100BASE-X SFP.

Power-over-Ethernet Support
With full Power-over-Ethernet (PoE) support, this media converter can function as a PoE injector. It's classified as Power Sourcing Equipment (PSE) and can provide power to one or two powered devices (PDs) using standard UTP cables. The converter provides up to 60 watts of power per RJ-45 port, allowing it to power cameras, wireless access points, and more.

Configurable Features
Changeable features include link modes and a PoE power reset function that enables a PD device to be reinitialized remotely, eliminating the need for costly trips to PD sites.

Link modes can be configured to propagate loss-of-link faults to managed devices, immediately notifying administrators of network outages.

Works with a Variety of Fiber
PoE++ Media Converter supports fixed-fiber connectors and 100-Mbps or 1000-Mbps SFP transceiver receptacles. It also supports SFPs for multimode and single-mode dual fiber as well as single-mode single fiber in standard and CWDM wavelengths.

Plenty of Mounting Options
This compact standalone media converter can be tabletop mounted, wall-mounted, or DIN-rail mounted using an optional DIN-rail mounting kit. It can also be mounted on a 1U 19-inch rackmount shelf.

Convert 10/100/1000BASE-T to 1000BASE-X SFP with Ease
If you need to extend your copper network with fiber, look no further. PoE++ Media Converter easily converts 10/100/1000BASE-T to 1000BASE-X or 100BASE-X SFP.

Power-over-Ethernet Support
With full Power-over-Ethernet (PoE) support, this media converter can function as a PoE injector. It's classified as Power Sourcing Equipment (PSE) and can provide power to one or two powered devices (PDs) using standard UTP cables. The converter provides up to 60 watts of power per RJ-45 port, allowing it to power cameras, wireless access points, and more.

Configurable Features
Changeable features include link modes and a PoE power reset function that enables a PD device to be reinitialized remotely, eliminating the need for costly trips to PD sites.

Link modes can be configured to propagate loss-of-link faults to managed devices, immediately notifying administrators of network outages.

Works with a Variety of Fiber
PoE++ Media Converter supports fixed-fiber connectors and 100-Mbps or 1000-Mbps SFP transceiver receptacles. It also supports SFPs for multimode and single-mode dual fiber as well as single-mode single fiber in standard and CWDM wavelengths.

Plenty of Mounting Options
This compact standalone media converter can be tabletop mounted, wall-mounted, or DIN-rail mounted using an optional DIN-rail mounting kit. It can also be mounted on a 1U 19-inch rackmount shelf.

Made to Work in the Toughest Environments
With an extended temperature range of -40° to 75° C, this hardened media converter can withstand some of the harshest conditions on earth, making it perfect for industrial applications.