Transceivers/Media Converters

The IMC-771/771 series are slide-in module Ethernet-to-fiber media converters for the IMC-7xx chassis which support hot-swappable and easy installation. They allow network operators to incorporate multiple fiber types and wavelengths within a network. The IMC-770/771 can be monitored and controlled via a central site with IMC-710 SNMP management module by iView, Telnet, or CLI while installed in a IMC-71x series chassis.

The IMC-771/771 offers a range of speeds up to Gigabit Ethernet and is available with SFP or build-in fiber connector. Multi-mode, single-mode fiber or double fiber capacity with single-strand which supports the transmission distance from 550m to 70km. The IMC-770/771 series feature in the Link Fault Pass Through (LFPT), a diagnostic feature that can enable or disable links to assist the end user in troubleshooting a failed segment and configuration control to retain the latest configuration regardless of how the initial configuration was setup.

The IMC-770I-2SFP converter is protocol-independent with dial SFP ports which can provide a single conversion between different wavelengths or single-mode and multi-mode fiber, single-mode to single-mode fiber, or multi-mode to single-strand fiber. Its SFP port must use an SFP of the same speed while allowing different fiber types. Additionally, the IMC-770I-2SFP and IMC-771I-SFP are industrial equipment devices. The unit operates in environments that demand extended operating temperatures.

The IMC-782-SFP media converter connects a host/remote Ethernet network over a fiber optic or CAT5 copper connection. It combines 10/100/1000Mbps to Gigabit fiber media conversion with an advanced feature set including OAM (operation, administration, and management), extra-tagging, and Ethernet type control functions for network management and troubleshooting. Administrators can observe the end-points over the fiber segment between them as a single management entity. Bandwidth scalability and support for MIBs II makes this modular device a versatile Gigabit solution.

TheIMC-784I-SFP comes with two SFP ports for the providers' network connection and two fixed 10/100/1000Base-T copper ports with four distinct DIP switch selectable configurations: 1+1 uplink protection revertive mode, 1+1 uplink protection non-revertive mode, a 4-port Gigabit switch, and a dual copper to fiber SFP media/mode converter.

The software management software for IMC-780 series, iView2 , allows users to perform remote configuration and alerts administrators to any potential problems on the long-haul fiber run, providing vital information on link condition and reporting data traffic statistics.

The iMcV-Giga-FiberLinX-III intelligent media converter connects a Host/ Remote Ethernet network over a fiber optic or CAT 5 copper connection. It combines 10/100/1000 Mbps to Gigabit fiber media conversion with an advanced feature set for network management and troubleshooting, including OAM (Operations, Administration and Maintenance), Extra-Tagging and EtherType control functionality. With the iMcV-Giga-FiberLinX-III series, administrators can observe the end-points over the fiber segment between them as a single management entity. Bandwidth scalability and support for MIBs II makes this modular device a versatile Gigabit solution, now available as a single-wide module.

Free management software, iView2, allows the customer to perform remote configuration and alerts administrators to any potential problems on the longhaul fiber run, provides vital information on link condition and reports data traffic statistics. In addition to the iMcV-Giga-FiberLinX-III's support for Host/Remote environments, the product also has built-in support for the Unified Management Agent (UMA). With UMA, the central location can manage all Host/Remote pairs installed in an iMediaChassis with the single IP address of the chassis.

The iMcV-Giga-FiberLinX-III is available in fixed-fiber port models or an SFP port for fiber or copper for more flexibility. The iMcV-Giga-FiberLinX-III SFP requires one or two MSA-compliant fiber optic SFP modules (sold separately) to operate; a 100Mbps or Gigabit fiber SFP can be installed. Copper SFPs are supported.

The iMcV-Giga-FiberLinX-III intelligent media converter connects a Host/ Remote Ethernet network over a fiber optic or CAT 5 copper connection. It combines 10/100/1000 Mbps to Gigabit fiber media conversion with an advanced feature set for network management and troubleshooting, including OAM (Operations, Administration and Maintenance), Extra-Tagging and EtherType control functionality. With the iMcV-Giga-FiberLinX-III series, administrators can observe the end-points over the fiber segment between them as a single management entity. Bandwidth scalability and support for MIBs II makes this modular device a versatile Gigabit solution, now available as a single-wide module.

Free management software, iView2, allows the customer to perform remote configuration and alerts administrators to any potential problems on the longhaul fiber run, provides vital information on link condition and reports data traffic statistics. In addition to the iMcV-Giga-FiberLinX-III's support for Host/Remote environments, the product also has built-in support for the Unified Management Agent (UMA). With UMA, the central location can manage all Host/Remote pairs installed in an iMediaChassis with the single IP address of the chassis.

The iMcV-Giga-FiberLinX-III is available in fixed-fiber port models or an SFP port for fiber or copper for more flexibility. The iMcV-Giga-FiberLinX-III SFP requires one or two MSA-compliant fiber optic SFP modules (sold separately) to operate; a 100Mbps or Gigabit fiber SFP can be installed. Copper SFPs are supported.

The IMC-782-SFP media converter connects a host/remote Ethernet network over a fiber optic or CAT5 copper connection. It combines 10/100/1000Mbps to Gigabit fiber media conversion with an advanced feature set including OAM (operation, administration, and management), extra-tagging, and Ethernet type control functions for network management and troubleshooting. Administrators can observe the end-points over the fiber segment between them as a single management entity. Bandwidth scalability and support for MIBs II makes this modular device a versatile Gigabit solution.

TheIMC-784I-SFP comes with two SFP ports for the providers' network connection and two fixed 10/100/1000Base-T copper ports with four distinct DIP switch selectable configurations: 1+1 uplink protection revertive mode, 1+1 uplink protection non-revertive mode, a 4-port Gigabit switch, and a dual copper to fiber SFP media/mode converter.

The software management software for IMC-780 series, iView2 , allows users to perform remote configuration and alerts administrators to any potential problems on the long-haul fiber run, providing vital information on link condition and reporting data traffic statistics.