Transceivers/Media Converters
-
Altronix eBridge1PCRTX Transceiver/Media Converter - 1 x Network (RJ-45) - Fast Ethernet - 10/100Base-T - 0.50 km - DC
eBridge1PCRX and eBridge1PCTX are CAT5 to Coax cable Ethernet adapters/media converters that deliver data and power over the coax cable in a PoE+ compliant format. The paired set enables fast 10/100 Base-T Ethernet digital communication to be transmitted over Coax cable. eBridge1PCRX receiver sends power over the coax to eBridge1PCTX transmitter under PoE protocol. eBridge1PCTX, in turn, delivers that PoE+ compliant power to a PoE-enabled camera or IP device. eBridge1PCRX will not deliver power to non-compliant devices, thus avoiding accidental power turn into improperly connected analog cameras. These plug and play units facilitate system upgrades from analog to IP cameras/devices utilizing existing legacy Coax and eliminating the costs and labor associated with installing new network cabling. In addition, data transmission over the Coax is possible up to 500m in comparison to 100m Ethernet maximum distance (see Maximum Length of Coax Type vs. Camera Power/PoE Class, pg. 3). A maximum range from headend to the PoE camera/device is 700m taking into consideration that up to 100m of structured cable may be deployed at each end.
Learn More$256.35 -
Altronix eBridge1PCRX - IP over Coax Receiver - Network (RJ-45) - 1x PoE+ (RJ-45) Ports - 10/100Base-TX - 0.10 km - Desktop
The eBridge1PCRX is CAT5 to Coax cable Ethernet Receiver that deliver data and power over the coax cable in a PoE compliant format. It sends power over the coax to the eBridge transceiver under PoE protocol. The eBridge1PCRX will not deliver power to non-compliant devices, thus avoiding damage to improperly connected non-PoE cameras. This plug and play unit facilitates system upgrades from analog to IP cameras/devices utilizing existing legacy Coax and eliminating the costs and labor associated with installing new network cabling. In addition, data transmission and power over the Coax is possible up to 1500 ft. in comparison to 100m (328 ft.) Ethernet maximum distance. A maximum range from head end to the PoE camera/
Learn More
device is 610m (2000 ft.), taking into consideration that up to 100m (328 ft.) of structured cable may be deployed at each end.$138.36 -
Altronix IP and PoE over Coax Transceiver - Network (RJ-45) - 1x PoE (RJ-45) Ports - 10/100Base-TX - 0.46 km - Desktop
The eBridge1PCT - IP over Coax transceiver is designed for use with eBridge1PCR, eBridge1PCRX, eBridge4PCRX and eBridge16PCRX receivers to enable fast 10/100Base-T Ethernet digital communication over coax cable. The eBridge1PCT will not deliver power to non compliant devices, thus avoiding damage to improperly connected non-PoE cameras/devices. This plug and play unit facilitates system upgrades from analog to IP cameras/devices utilizing existing legacy Coax and eliminating the costs and labor associated with installing new network cabling. In addition, data transmission is extended to 2,000' (over five times the 100m/328' Ethernet maximum length), eliminating the need for repeaters.
Learn More$133.13 -
Altronix 8-Port Media Converter/Repeater - 8 x Network (RJ-45) - Gigabit Ethernet - 10/100/1000Base-T, 1000Base-X, 1000Base-LX/SX - 8 x Expansion Slots - SFP - 8 x SFP Slots - Power Supply - Rack-mountable
Altronix NetWaySP8A eight (8) port media converter/repeater converts 10/100/1000 Mbps to Fiber (1000Base-X/SX/LX).
Learn More$1,577.29 -
Altronix eBridge1PCTX - IP over Coax Transceiver - 1 x Network (RJ-45) - Fast Ethernet - 10/100Base-TX - 0.61 km
The eBridge1PCTX - IP over Coax transceiver is designed for use with eBridge1PCRX, eBridge1PCRM, eBridge4PCRX and eBridge16PCRX receivers to enable fast 10/100Base-T Ethernet digital communication over coax cable. The eBridge1PCTX will not deliver power to non compliant devices, thus avoiding damage to improperly connected non-PoE cameras/devices. This plug and play unit facilitates system upgrades from analog to IP cameras/devices utilizing existing legacy Coax and eliminating the costs and labor associated with installing new network cabling. In addition, data transmission is extended up to 610m (over five times the 100m Ethernet maximum length) eliminating the need for repeaters.
Learn More$133.13 -
Altronix eBridge1ST EoC and PoE/PoE+ Transceiver - 1 x Network (RJ-45) - 1x PoE (RJ-45) Ports - Fast Ethernet - 10/100Base-TX - 0.50 km - PoE+
eBridge1ST EoC transceiver transmits data at 25Mbps over Coax cable to a paired eBridge receiver and provides power in a PoE+ compliant format to an enabled device/camera. The eBridge receiver is available in various options (see compatibility list below/Altronix.com), including built-in midspan, or for use with an external midspan, such as the Altronix Netway series to facilitate network applications. The receiver passes PoE+ power over the same coax cable to the eBridge1ST transceiver, which, in turn passes this power to an enabled IP camera/device. These plug and play units facilitate cost-effective solutions for IP devices. They can be installed at distances greater than 500m. They provide a simple way to replace legacy analog products with new IP devices over existing coax. Applications:
- Retrofit digital IP cameras in an analog CCTV installation.
- Works with IP Megapixel and non Megapixel cameras.
- Extend Network link distance in an industrial environment over 610m.
- Upgrade deployed CCTV Coax to a digital network in Retail, Casinos, Airports, Schools, Hospitals, etc.
$133.13
