Switches & Bridges

ComNet product series RL1000GW are substation-rated and industrially hardened layer 3 router/ gateways, with a unique and highly robust packet processing SCADA-aware security firewall for the most mission-critical and demanding cyber-security applications. The RL1000GW is intended for deployment in environments where high levels of electromagnetic noise and interference (EMI) and severe voltage transients and surges are routinely encountered, such as electrical utility substations and switchyards, heavy manufacturing facilities, trackside electronic equipment, and other difficult out-of-plant installations. Layer 3 routing functionality allows for the participation and foundation of a core network infrastructure. The compact-sized DIN-rail mountable RL1000GW is ideally suited to those installations and applications where space may be limited. These features make the RL1000GW an effective platform for deploying a secure communications and networking gateway for remote electrical utility sites, and other critical infrastructure applications.

Features

• Fully compliant with the requirements of IEC 61850-3 and IEEE 1613 Class 2, for use in electrical utility substations; and NEMA TS-1/TS-2 for Traffic Signal Control Equipment
• For NERC-CIP-5 and NERC-CIP-014 compliance, or any network application demanding effective cyber-security protection
• Optional internal 2G/3G/4G LTE GPRS/UMTS cellular radio modem with 2 SIM card slots, for maximum network reliability and availability
• Serial interface supports 2 ports of RS-232 or 1 port each of RS-232 and 4-wire RS-485 serial data, with serial gateway and serial tunneling
• Optional 100/1000 Mbps SFP uplink port, for high-speed connection to the user's network
• Highly advanced and sophisticated security suite: Per Port Deep Packet Inspection (DPI) SCADA-aware firewall supports DNP-3, ModBus, IEC 104/101, and IEC 61850 protocols for NERC-CIP-5 compliance
• Network Learning allows the user to easily create secure and highly effective SCADA firewall rules
• IEEE 802.1X Port-based network access control
• L-2/3/4 ACL for incoming traffic, and layer 2/layer 3 VPN with IPsec
• User APA (Authentication Proxy Access) controls remote access and communications to end-point/edge of network devices by all users, with extreme granularity across the users, time, physical Ethernet or serial data ports, TCP ports, and SCADA protocols. It also provides PCAP for the entire allowed maintenance or access session.
• IPsec VPN with X.509 certificates, for use over any cellular or fiber-optic network
• Ethernet layer 3 IP routing with integrated VPN
• Fault/event notification provided through Syslog and SNMP traps
• Environmentally hardened for deployment in difficult unconditioned out-of-plant installations: Extended ambient operating temperature range of -40° C to +85° C. Conformal coating is optionally available for humidity with condensation or airborne particulate matter environments
• Internal/self-contained universal power supply: Available in operating voltage ranges from 9 to 60 VDC.
• No fans or forced-air cooling; cooling via natural convection eliminates unreliable and troublesome fans/moving parts, with no periodic maintenance requirements.
• Compact form-factor saves space in those installations where space may be at a premium.
• Electric Port Supports Auto-negotiation for Full Duplex or Half Duplex Data Throughput
• Rigid aluminum housing
• Designed for wall or DIN rail mount installations

ComNet product series RL1000GW are substation-rated and industrially hardened layer 3 router/ gateways, with a unique and highly robust packet processing SCADA-aware security firewall for the most mission-critical and demanding cyber-security applications. The RL1000GW is intended for deployment in environments where high levels of electromagnetic noise and interference (EMI) and severe voltage transients and surges are routinely encountered, such as electrical utility substations and switchyards, heavy manufacturing facilities, trackside electronic equipment, and other difficult out-of-plant installations. Layer 3 routing functionality allows for the participation and foundation of a core network infrastructure. The compact-sized DIN-rail mountable RL1000GW is ideally suited to those installations and applications where space may be limited. These features make the RL1000GW an effective platform for deploying a secure communications and networking gateway for remote electrical utility sites, and other critical infrastructure applications.

Features

• Fully compliant with the requirements of IEC 61850-3 and IEEE 1613 Class 2, for use in electrical utility substations; and NEMA TS-1/TS-2 for Traffic Signal Control Equipment
• For NERC-CIP-5 and NERC-CIP-014 compliance, or any network application demanding effective cyber-security protection
• Optional internal 2G/3G/4G LTE GPRS/UMTS cellular radio modem with 2 SIM card slots, for maximum network reliability and availability
• Serial interface supports 2 ports of RS-232 or 1 port each of RS-232 and 4-wire RS-485 serial data, with serial gateway and serial tunneling
• Optional 100/1000 Mbps SFP uplink port, for high-speed connection to the user's network
• Highly advanced and sophisticated security suite: Per Port Deep Packet Inspection (DPI) SCADA-aware firewall supports DNP-3, ModBus, IEC 104/101, and IEC 61850 protocols for NERC-CIP-5 compliance
• Network Learning allows the user to easily create secure and highly effective SCADA firewall rules
• IEEE 802.1X Port-based network access control
• L-2/3/4 ACL for incoming traffic, and layer 2/layer 3 VPN with IPsec
• User APA (Authentication Proxy Access) controls remote access and communications to end-point/edge of network devices by all users, with extreme granularity across the users, time, physical Ethernet or serial data ports, TCP ports, and SCADA protocols. It also provides PCAP for the entire allowed maintenance or access session.
• IPsec VPN with X.509 certificates, for use over any cellular or fiber-optic network
• Ethernet layer 3 IP routing with integrated VPN
• Fault/event notification provided through Syslog and SNMP traps
• Environmentally hardened for deployment in difficult unconditioned out-of-plant installations: Extended ambient operating temperature range of -40° C to +85° C. Conformal coating is optionally available for humidity with condensation or airborne particulate matter environments
• Internal/self-contained universal power supply: Available in operating voltage ranges from 9 to 60 VDC.
• No fans or forced-air cooling; cooling via natural convection eliminates unreliable and troublesome fans/moving parts, with no periodic maintenance requirements.
• Compact form-factor saves space in those installations where space may be at a premium.
• Electric Port Supports Auto-negotiation for Full Duplex or Half Duplex Data Throughput
• Rigid aluminum housing
• Designed for wall or DIN rail mount installations

The ComNet RLGE2+1SMS is a substation-rated and industrially hardened three-port self-managed switch with uplink management functionality. Fully compliant with the requirements of IEC 61850-3, IEEE 1613 Class 2, EN50155, and NEMA TS-1/TS-2, it is designed for deployment in environments where high levels of electromagnetic noise and interference (EMI) and severe voltage transients and surges are routinely encountered, such as electrical utility substations and switchyards, heavy manufacturing facilities, trackside and roadside electronic equipment, and other difficult out-of-plant applications. The DIP-switch-selectable 100BASE-FX or 1000BASE-FX port supports conventional CAT-5e/CAT-6 copper or optical transmission media by selection of the appropriate ComNet SFP module. User-selectable link fault pass-through provides remote indication of a network fault, and two summary fault alarms provide a local or remote indication via dry contact closures in the event of loss of optical link or operating power. The 10/100/1000BASE-TX ports support both auto-negotiation and automatic MDI/MDI-X crossover for full and half-duplex operation; manual MDI/MDI-X switching is not required. The RLGE2+1SMS comes pre-programmed, preventing network video flooding with DIP-switch selection of the SFP port as uplink or as an unmanaged switch. The internal/self-contained 12 to 24 VDC, 48 VDC, or HV AC/DC power supply features redundant power inputs when used with 12 to 24 VDC or 48 VDC power sources, for the highest possible reliability. The simple to install, plug-and-play RLGE2+1SMS is DIN-rail or panel-mountable, and is ideal for mission-critical applications where very high levels of reliability and network availability are of the utmost importance.

FEATURES:

• Full duplex transmission of 10/100/1000 Mbps Ethernet: (2) 10/100/1000BASE-TX ports and (1) 100BASE-FX or 1000BASE-FX SFP port
• Designed to the requirements of IEC 61850-3 and IEEE 1613 Class 2 for electrical utility substations, EN50155 for railway applications, and NEMA TS-1/TS-2 for traffic signal control equipment, and IEC/EN60950-1
• Extended ambient operating temperature range of -40? to +85? C, for use in virtually any environment. Optional conformal coating available for humidity with condensation or airborne particulate matter environments
• Uses customer-installed ComNet SFPs for compatibility with a wide range of optical fibers, optical connector types, and optical transmission distances of up to 120 km
• Link fault pass-through provides a remote indication of a network fault
• 10/100/1000BASE-TX ports support both auto-negotiation and automatic MDI/MDI-X crossover for full and half-duplex operation; manual MDI/MDI-X switching is not required
• 12 to 24 VDC, 48 VDC or HV AC/DC (88 to 300 VDC/85-264 VAC) operating power options
• Internal/self-contained high-reliability power supply eliminates the need for an external power supply, and a screw terminal block connects directly to the power source for permanent, reliable, and maintenance-free operation
• 12 to 24VDC and 48 VDC input power supply versions feature redundant power inputs, for extremely high levels of reliability and availability
• No fans or forced-air cooling required; cooling via natural convection eliminates unreliable and troublesome fans/moving parts for improved reliability
• Indicating LEDs confirm operating status of the switch and the link for ease in troubleshooting
• Summary fault alarms provide a local or remote indication via dry contact closures in the event of loss of optical link or operating power

The ComNet RLGE2+1SMS is a substation-rated and industrially hardened three-port self-managed switch with uplink management functionality. Fully compliant with the requirements of IEC 61850-3, IEEE 1613 Class 2, EN50155, and NEMA TS-1/TS-2, it is designed for deployment in environments where high levels of electromagnetic noise and interference (EMI) and severe voltage transients and surges are routinely encountered, such as electrical utility substations and switchyards, heavy manufacturing facilities, trackside and roadside electronic equipment, and other difficult out-of-plant applications. The DIP-switch-selectable 100BASE-FX or 1000BASE-FX port supports conventional CAT-5e/CAT-6 copper or optical transmission media by selection of the appropriate ComNet SFP* module. User-selectable link fault pass-through provides remote indication of a network fault, and two summary fault alarms provide a local or remote indication via dry contact closures in the event of loss of optical link or operating power. The 10/100/1000BASE-TX ports support both auto-negotiation and automatic MDI/MDI-X crossover for full and half-duplex operation; manual MDI/MDI-X switching is not required. The RLGE2+1SMS comes pre-programmed, preventing network video flooding with DIP-switch selection of the SFP port as uplink or as an unmanaged switch. The internal/self-contained 12 to 24 VDC, 48 VDC, or HV AC/DC power supply features redundant power inputs when used with 12 to 24 VDC or 48 VDC power sources, for the highest possible reliability. The simple to install, plug-and-play RLGE2+1SMS is DIN-rail or panel-mountable, and is ideal for mission-critical applications where very high levels of reliability and network availability are of the utmost importance.

FEATURES:

• Full duplex transmission of 10/100/1000 Mbps Ethernet: (2) 10/100/1000BASE-TX ports and (1) 100BASE-FX or 1000BASE-FX SFP port
• Designed to the requirements of IEC 61850-3 and IEEE 1613 Class 2 for electrical utility substations, EN50155 for railway applications, and NEMA TS-1/TS-2 for traffic signal control equipment, and IEC/EN60950-1
• Extended ambient operating temperature range of -40? to +85? C, for use in virtually any environment. Optional conformal coating available for humidity with condensation or airborne particulate matter environments
• Uses customer-installed ComNet SFPs for compatibility with a wide range of optical fibers, optical connector types, and optical transmission distances of up to 120 km
• Link fault pass-through provides a remote indication of a network fault
• 10/100/1000BASE-TX ports support both auto-negotiation and automatic MDI/MDI-X crossover for full and half-duplex operation; manual MDI/MDI-X switching is not required
• 12 to 24 VDC, 48 VDC or HV AC/DC (88 to 300 VDC/85-264 VAC) operating power options
• Internal/self-contained high-reliability power supply eliminates the need for an external power supply, and a screw terminal block connects directly to the power source for permanent, reliable, and maintenance-free operation
• 12 to 24VDC and 48 VDC input power supply versions feature redundant power inputs, for extremely high levels of reliability and availability
• No fans or forced-air cooling required; cooling via natural convection eliminates unreliable and troublesome fans/moving parts for improved reliability
• Indicating LEDs confirm operating status of the switch and the link for ease in troubleshooting
• Summary fault alarms provide a local or remote indication via dry contact closures in the event of loss of optical link or operating power

The ComNet RLGE2+1SMSPOEHO is a substation-rated and industrially hardened 3-port self-managed Ethernet switch with uplink management capability, that supports Universal PoE (Power over Ethernet) powered devices requiring up to 60 watts of operating power. Designed to the requirements of IEC 61850-3, IEEE 1613 Class 2, EN50155, and NEMA TS-1/TS-2, it is intended for deployment in environments where high levels of electromagnetic noise and interference (EMI) and severe voltage transients and surges are routinely encountered, such as electrical utility substations and switchyards, heavy manufacturing facilities, trackside and roadside electronic equipment, and other difficult out-of-plant applications. User-selectable link fault pass-through provides remote indication of a network fault, and two summary fault alarms provide a local or remote indication via dry contact closures in the event of loss of optical link or operating power. The 10/100/1000BASE-TX ports support both autonegotiation and automatic MDI/MDI-X crossover for full and half-duplex operation; manual MDI/MDI-X switching is not required. The RLGE2+1SMSPOEHO comes pre-programmed, preventing network video flooding with DIP-switch selection of the SFP port as uplink or as an unmanaged switch. The internal/self-contained power supply features redundant 48 VDC inputs, for the highest possible reliability. The simple to install, plug-and-play RLGE2+1SMSPOEHO is DIN-rail or panel-mountable, and is ideal for mission-critical applications where very high levels of reliability and network availability are of the utmost importance.

FEATURES:

• Supports PoE PDs (Powered Devices) requiring PoE (15 watts), PoE+ (30 watts), and Universal PoE/PoE++ (60 watts)
• Full duplex transmission of 10/100/1000 Mbps Ethernet: (2) 10/100/1000BASE-TX ports and (1) 100BASE-FX or 1000BASE-FX SFP port
• Designed to the requirements of IEC 61850-3 and IEEE 1613 Class 2 for electrical utility substations, EN50155 for railway applications, and NEMA TS-1/TS-2 for traffic signal control equipment, and IEC/EN60950-1
• Extended ambient operating temperature range of -40? to +85? C, for use in virtually any environment. Optional conformal coating available for humidity with condensation or airborne particulate matter environments
• Uses customer-installed ComNet SFPs for compatibility with a wide range of optical fibers, optical connector types, and optical transmission distances of up to 120 km
• Link fault pass-through provides a remote indication of a network fault
• 10/100/1000BASE-TX ports support both auto-negotiation and automatic MDI/MDI-X crossover for full and half-duplex operation; manual MDI/MDI-X switching is not required
• 48 VDC operating power
• Internal/self-contained high-reliability power supply eliminates the need for an external power supply, and a screw terminal block connects directly to the power source for permanent, reliable, and maintenance-free operation
• Features redundant power inputs, for extremely high levels of reliability and availability
• No fans or forced-air cooling required; cooling via natural convection eliminates unreliable and troublesome fans/moving parts for improved reliability
• Indicating LEDs confirm operating status of the switch and the link for ease in troubleshooting
• Summary fault alarm provides a local or remote indication via dry contact closure in the event of loss of optical link or operating power
• Rugged 19-gauge galvanized & powder-coated steel enclosure may be DIN-rail or panel-mounted
• Made in the USA
• Lifetime Warranty