Switches & Bridges

Why You Want It | Plug and Play

Ready to perform right out of the box with no configuration required

Multi-GIGABIT Ports

Multi-Gigabit ports for high data rate transmission

Wi-Fi 6 Ready

Take advantage of the efficiency and speeds provided by Wi-Fi 6

LED Indicator

Multi-Gigabit ports for high data rate transmission

Durable Design

Metal housing enhances the durability

Silent Operation

Fanless design enhances reliability and is suitable for noise-free working environments

QoS Management

Quality of Service for uninterrupted connections

Energy Saving Technology

Designed for low power consumption

Plug-and-play to enjoy fast connectivity

The DMS-107 7-Port Multi-Gigabit Unmanaged Switch offers five Gigabit and two 2.5 Gigabit Ethernet ports for high-speed to meet your high-performance expectations. The Gigabit ports are ready for Wi-Fi 6, providing unlimited speed and performance. DMS-107 also supports IEEE 802.3az Energy-Efficient Ethernet (EEE), which can reduce power consumption and optimize usage. Without complex installation steps, plug-and-play is convenient and easy for every usage scenario.

Silent Operation

The DMS-107 owns a metal out case with a fanless design which can improve heat dissipation and allows noise-free operation in the working area. All the high-quality designs enhance its durability and are ideally suited for Small Office Home Office (SOHO) environments. 

Integrated Networking

The auto-sensing ports of DMS-107 flexibly build an integrated workgroup network. Through the auto-negotiation feature, these ports will detect the network speed and allow you to get the maximum speed possible for each device.

Traffic Management

The traffic management of DMS-107 includes IEEE 802.1p Quality of Service (QoS) and IEEE 802.3x Flow Control. The 802.1p QoS feature classified the traffic into 8 priority levels and prioritized by their importance. As for Flow Control, it will temporarily stop data transmission when the switch's input buffer is full, helping to minimize dropped packets. The traffic management features provide a more reliable connection for all your devices.

Green Technology

Under the concept of Eco-friendly, the DMS-107 switch features green technology, such as IEEE 802.3az Energy-Efficient Ethernet (EEE) and link status detection. While the network utilization is low, Energy-Efficient Ethernet can efficiently reduce the switch's power consumption, bringing down the cost in the inactivity duration. Also, the power-saving mode automatically powers down the ports when no link is detected. The link status detection function will effectively save energy and costs.

Simplified Installation

All the ports on the DMS-107 support automatic MDI/MDIX crossover without any cables. Each port connects the server, hub, router, or switch easily just by plugging in the cable. Besides, the DMS-107 ports feature LED indicators. With the indicators, you can easily distinguish link status.

2.5G Speed, Ready for Wi-Fi 6 and More

The DMS-1250 Series switches can enhance your network by connecting a Wi-Fi 6 Access Point to any of the 2.5 Gbps ports, effectively maximizing throughput and speed. Multi-Gigabit Ethernet eliminates potential bottlenecks with Wi-Fi 6 Access Points, enabling your network to fully leverage the efficiency and high speeds offered by Wi-Fi 6.

Cutting-Edge PoE Features Ensuring | Reliable Power Delivery

PoE+ ports provide a high power budget to fulfill the most business needs. The innovative PoE functions can ensure uninterrupted power delivery to the power devices.

Why PoE

PoE switches simplify device installation by reducing cable usage and eliminating separate power supplies or outlets, unlike traditional switches.

Perpetual PoE

Perpetual PoE provides an uninterrupted power supply to network devices, even during reboots or maintenance.

Fast PoE

Fast PoE technology reduces the time it takes for devices to become operational after connecting to the network.

PD-Alive

The PD-Alive feature is perfect for IP surveillance networks to monitor the status of connected powered devices and verify their activity.

High Power with IEEE 802.3bt

The DMS-1250-10SPL integrates with IEEE802.3bt, providing a significant 60W per port and a total budget of 120W. Recognized as PoE++, this technology represents a substantial advancement, not only increasing power capacity but also expanding possibilities for Ethernet-powered devices. This improvement is a valuable addition to modern networking and power delivery solutions.

6 kV Surge Protection for All Ethernet Ports

The DMS-1250 Series switches feature enhanced 6kV surge protection on all 2.5-Gigabit Ethernet access ports, designed to help your network remain resilient and devices safe from electrical surges.

Support L2+ Features

The DMS-1250 Series switches offer a comprehensive set of Layer 2+ capabilities, including:

• Static Route
• IPv4/IPv6
• DHCP relay
• DiffServ QoS
• Port Mirroring
• Spanning Tree Protocol (STP/MSTP/RSTP) 
• Link Aggregation Control Protocol (LACP) 
• IGMP and MLD Snooping

Easy Management by DNC & D-View 8

The DMS-1250 Series switches offers a range of management tools to cater to users' diverse needs. D-Link Nuclias Connect enables the discovery and management of multiple D-Link devices, providing access to configure settings efficiently. Furthermore, the DMS-1250 Series can be seamlessly managed through D-View 8, a comprehensive central network management system. SNMP functionality allows for centralized network asset management, remote configuration, and logging functions.

Best Choice for SOHO, SMB and MDU

The DMS-1250 Series switches are versatile, suitable for SOHO, SMB, and MDU environments. They provide high-speed data transmission with 2.5GE and a crucial 10G speed uplink for external connectivity. This high-speed uplink ensures that the entire MDU can access external services without encountering data bottlenecks. Furthermore, they effectively implement IEEE 802.3at or IEEE 802.3bt in DMS-1250-10SP, 10SPL, and 12TP to enable devices to connect and receive power supply.

The D-Link DXS-1210 Series conveniently offers a range of 10-Gigabit copper and fiber port combinations to cost-effectively alleviate network congestion. Select models are equipped with SFP+ or SFP28 ports for 10G/25G expandable network designed for scalability and can auto-detect surveillance and voice data to ensure uninterrupted video footage and jitter-free VoIP calls.

10 Gigabit Ports

10G connections for low latency and high bandwidth environments

10G/ 25G SFP28 Ports

10G/25G expandable network designed for scalability (DXS-1210-28T only)

User Friendly Web GUI

Multi-language Web GUI makes management easy for global deployments

Eco-Friendly Design

With a housing made from post-consumer recycled materials and delivered in sustainable packaging, the smart mesh router was designed to reduce its environmental impact

Layer 2 Features

Equipped with a complete lineup of L2 features, including IGMP snooping, port mirroring, spanning tree protocol(STP), and link aggregation control protocol (LACP).

Lite Layer 3 Features

Supports IP interfaces, ARP, IPv6 neighbor discovery (ND) and default routing

Quality of Service

Auto detection for uninterrupted surveillance video and jitter-free VoIP calls

Network Security

D-Link's innovative Safeguard Engine™ protects the switches against traffic flooding caused by malicious attacks.

Affordable 10G capabilities, for a reliable high-speed network

Add 10-Gigabit Ethernet connectivity to your network with these cost-effective switches. Designed to work as the network core for Small to Medium Businesses (SMBs) or as an aggregation switch in a larger Enterprise.

Extensive Layer 2 & Layer 3 Lite features.

The DXS-1210 series includes layer 2 features such as port mirroring, Spanning Tree Protocol (STP), and Link Aggregation Control Protocol (LACP). They also support IP interfaces, ARP, IPv6 Neighbor Discovery (ND), default routing, IPv4/IPv6 static routing, IGMP and MLD Snooping, auto voice and surveillance VLAN, LLDP and LLDP-MED.

Improved intranet performance

Inter-VLAN routing allows traffic to be routed between VLANs without passing through the router, reducing the load on the router as well as the backbone networks.

Security and QoS controls for priorities

Security controls for protection of the network, and QoS ensures essential traffic reaches its destination.

Seamless integration.

The DXS-1210 Series comes with both RJ45 and SFP+ ports capable of connecting to Cat. 6 and fibre for 10G Ethernet. This means the DXS-1210 series can provide a flexible solution for upstream or downstream server connections, making network deployment easier.

Security with Every Port.

The innovative D-Link Safeguard Engine protects the switches against traffic flooding caused by malicious attacks and increases overall network reliability. 

These switches also featureAddress Resolution Protocol (ARP)spoofing prevention which further protects the network from cyber attacks. They also use packet control ACLs to block invalid packets that contain fake ARP messages.

The Access Control List (ACL)helps protect the internal IT network through permission-based network access.

The DHCP server screen feature filters DHCP replies on unauthorised ports to prevent them from being assigned an IP address.

And support for 802.1X port-based and host-based authentication allows the network to be authenticated through external RADIUS servers.

D-Link's DXS-1210 series 10 Gigabit Ethernet Smart Switches are cost effective 10 GbE switches capable of servicing a range of network needs in any business. Supporting 10GBASE-T/ SFP+ combo ports, they provide connection flexibility across a network allowing easier network integration. With high performance and low latency, these switches can fulfill the needs for virtualization, cloud services and server-to-server applications, making it perfect for SMB customers.

DXS-1210 series switches offer 10GbE copper and fiber ports. The 10GBASE-T copper ports utilize RJ45 interfaces and support 10 Gigabit speeds over CAT6a/CAT7 LAN cabling up to 100m. The 10GbE fiber ports can be connected to other 10GbE ports with low cost Direct Attach Copper (DAC) cables, or with SFP+ optical transceivers over multimode or singlemode fiber optic cabling.

Energy Saving

Incorporating D-Link Green technology, the switches are capable of power-saving without sacrificing operational performance or functionality. They feature built-in smart fans; internal heat sensors monitor and detect temperature changes, and react accordingly by utilizing different fan speeds for different temperatures. At lower temperatures, the fans will run slower, reducing the switch's power consumption and noise. Link status drastically reduces power consumption by automatically toggling ports without a link to sleep mode. DXS-1210 switches take the approach to green IT one step further by incorporating a special chipset with advanced silicon technology for efficient use of energy.

Extensive Management and Layer 2 Features

Equipped with a complete lineup of L2 features, DXS-1210 switches include port mirroring, Spanning Tree Protocol and Link Aggregation Control Protocol (LACP). Network maintenance features include loopback detection and cable diagnostics. Loopback detection is used to detect loops created by a specific port and automatically shut down the affected port. The cable diagnostic feature, designed primarily for administrators and customer service representatives, can rapidly discover errors and determine the cable quality, allowing the switch to manage itself for you.

QoS, Bandwidth Control

DXS-1210 switches support Auto Surveillance VLAN (ASV), and Auto Voice VLAN, which are best suited for VoIP and video surveillance deployments. Auto Surveillance VLAN technology consolidates data and surveillance video transmission through a single unit, thus sparing businesses the expense of dedicated hardware and facilities. ASV also ensures the quality of real-time video for monitoring and control without compromising the transmission of conventional network data. Auto Voice VLAN technology enhances the VoIP service by automatically placing voice traffic from an IP phone to an assigned VLAN. With higher priority and individual VLAN, these features guarantee the quality and security of VoIP traffic. Furthermore, the DSCP markings on Ethernet packets enable different levels of service to be assigned to network traffic. As a result, these voice and video packets take precedence over other packets. In addition, with bandwidth control, network administrators can reserve bandwidth for important functions that require a larger bandwidth or might have high priority.

10-Gigabit Smart Managed switches with optional auto-detection to eliminate surveillance and VoIP latency, and optional SFP+ or SFP28 ports for 10G/25G expandable network, designed for scalability

• Range of copper and fiber port combinations for deployment flexibility
• Effortlessly eliminate surveillance and VoIP latency (select models only)
• Layer 2 management and security, with Layer 3 Lite features
• Up to 32K MAC address table size to connect more clients
• Cable Diagnostics & Loopback Detection streamlines network operation

The D-Link DXS-1210 Series conveniently offers a range of 10-Gigabit copper and fiber port combinations to cost-effectively alleviate network congestion. Select models are equipped with SFP+ or SFP28 ports for 10G/25G expandable network designed for scalability and can auto-detect surveillance and voice data to ensure uninterrupted video footage and jitter-free VoIP calls.

10-Gigabit Ports

10G connections for low latency and high bandwidth environments

10G/ 25G SFP28 Ports

10G/25G expandable network designed for scalability (DXS-1210-28T only)

User Friendly Web GUI

Multi-language Web GUI makes management easy for global deployments

Energy Saving Technology

By incorporating D-Link Green technology, this series of switches is capable of saving power without sacrificing operational performance or functionality.

Layer 2 Features

Includes port mirroring, Spanning Tree Protocol (STP), and Link Aggregation Control Protocol (LACP)

Layer 3 Lite Features

Such as IP interfaces, ARP, IPv6 Neighbor Discovery (ND), Default Routing and Static Routing

Quality of Service

Automatically detects surveillance and VoIP data to ensure uninterrupted transmission (select models only)

Network Security

D-Link's innovative Safeguard Engine™ protects the network against traffic flooding caused by virus and worm infections

Alleviate Network Congestion

Add 10-Gigabit Ethernet connectivity with these affordable high-performance switches. Designed for deployment in small to medium-sized business (SMB) core networks and powerful enough for enterprise aggregation applications.

Simple & Cost-Effective Migration Up to 100G

The DXS-1210-28T model features 24 10GBase-T and four SFP28 fiber ports (10G/25G) to provide great scalability, highly efficient network and expandable capacity

Convenient Layer 2 & Layer 3 Lite Configurability

The DXS-1210 Series can be deployed as a Layer 2 aggregation switch with features such as port mirroring, STP, and LACP. When implemented as a Layer 3 Lite core switch, IP interfaces, ARP, IPv6 ND, Default Routing, and Static Routing can be applied for efficient routing applications.

An Added Line of Defense Against Attacks

The DXS-1210 Series defends your network with D-Link's innovative Safeguard Engine™ to neutralize threats such as malicious network flooding attacks, ARP spoofing, and bogus DHCP IP addressing. The DXS-1210 Series supports 802.1X port-based and host-based authentication, allowing the network to be authenticated through external RADIUS servers.