Audio & Video Consoles/Extenders

SmartAVI's XTPro is a high resolution UXGA and stereo audio extender system (transmitter and receiver) designed to broadcast desktop video, stereo audio signals, IR and RS-232 up to 1000 feet over unshielded twisted pair (UTP) cabling. Powerful, Cost-Effective Extension Solution The XTPro excels at delivering 1080p (1920x1080) full HD video and stereo audio signals to output devices up to 1000 feet away from a signal source. Better yet, the XTPro is optimized for IR and RS-232 signal extension, as well, so command of distant devices is never out of reach. Cost-conscious users can breathe easy: XTPro is a great value with economical CAT5 cabling, perfect for taking stress off AV signals and wallets alike! A Perfect Fit in Any AV Environment The XTPro excels in a variety of AV environments, like airports, retail stores, schools, hospitals, office buildings, entertainment venues, and more!

Features

• Dual-screen support
• Uses easy to install, inexpensive CAT-5/5e/6/7/8
• Each Output reaches up to 1,000 feet (300 m)
• Supports high resolutions up to 1920x1200
• HDTV compatible (720p, 1080i, 1080p)
• 300 MHz Bandwidth.
• Sends high-resolution VGA, stereo audio signals, RS232 or IR from one source to 2 locations
• Compatible with VGA, XGA, Sun, MAC and SGI
• Sync Format / Polarity Preservation.
• Compatible with Line Level Stereo Audio Signals
• High ground loop immunity
• Built-in power surge and transient protection
• Designated trimmer in the remote unit to compensate for cable length./li>
• Compact Metal Case Enclosure
• External power supply
• RS-232 communication support to single or multiple displays
• IR command to single or multiple displays

The ComNet™ FVT/FVR1021 series video transmitter/ receiver and data transmitter/receiver supports the simultaneous transmission of short-haul quality 10-bit digital video and return data over one multimode or single mode optical fiber. This module is universally compatible with major CCTV camera manufacturers and supports RS-232 and RS-422 data interfaces. The FVT/FVR1021 allows the user to set the data through a switch on the unit. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status. Packaged in the exclusive ComNet ComFit housing, these units may be either wall or rackmounted, or may be DIN-rail mounted by the addition of ComNet model DINBKT1 adaptor plate.

Features

• 10-bit Digital Video Transmission
• Compatible with all NTSC, PAL, or SECAM CCTV camera systems
• Full Color Compatibility
• Exceeds RS-250C Short-Haul quality
• Supports RS-232 and RS-422 data interfaces
• Supports Manchester and bi-phase data
• No In-field electrical or optical adjustments
• Bi-color (Red/Green) LED status indicators provide rapid indication of critical operating parameters
• Integrated WDM for greater product reliability
• Voltage transient protection on all power and signal input/output lines provides unconditional protection from power surges and other voltage transient events.

The ComNet FDC8 Series contact closure transmitter and receiver provides transmission of up to eight independent contact closures over one RS232 link or optical fiber. Microprocessor-based logic sends the contact information in packets that are ordered and encoded, ensuring extremely robust transmission. Packets that are garbled, packets out of sequence, and transmission bit errors will not cause random changes of state on the contact relays. Also, the mechanical latching relays maintain their state even when the unit loses power. Each module incorporates power and individual status indicating LEDs for monitoring confirmation of contact closure of each of the eight channels. These units are interchangeable between stand-alone or card mount configurations.

Features for FDC8 Series

• Point-to-Point architecture
• Designed to meet full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions, and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.
• SPST latching relays
• Microprocessor-based logic and latching relays in receiver unit eliminate random contact closure status in the event of loss of link or loss of prime operating power.

Applications

• Alarm Event Triggering
• Building Automation and Environmental Control Systems
• Fire and Alarm Systems
• Gate Control
• PIR Signal Transmission

The ComNet™ FDC8 Series contact closure transmitter and receiver provides transmission of up to eight independent contact closures over one RS232 link or optical fiber. Microprocessor-based logic sends the contact information in packets that are ordered and encoded, ensuring extremely robust transmission. Packets that are garbled, packets out of sequence, and transmission bit errors will not cause random changes of state on the contact relays. Also, the mechanical latching relays maintain their state even when the unit loses power. Each module incorporates power and individual status indicating LEDs for monitoring confirmation of contact closure of each of the eight channels. Packaged in the exclusive ComNet ComFit housing, these units may be either wall or rack-mounted, or may be DIN-rail mounted by the addition of ComNet model DINBKT1 or DINBKT4 adaptor plate.