Audio & Video Consoles/Extenders

The KW-14R is a high-definition, wireless, HDMI receiver for indoor use. Up to four KW-14R receivers can receive from one KW-14T transmitter and up to three KW-14T transmitters can be paired with one KW-14R receiver.

• Max. Data Rate - 6.75Gbps (2.25Gbps per graphic channel), Deep Color up to 12-bit.
• Secure Link - Uses AES-128 bit encryption.
• Connection Capacity - Up to four receivers can receive from one transmitter simultaneously; up to three transmitters associated with one receiver at any given time.
• Transmission Range - Up to 30m (100ft) including through walls and furniture.
• Automatic Frequency Selection - Selects the most suitable frequencies to prevent RF interference.
• Auto EDID Adjustment - To allow multi-screen support.
• IR Remote Control - Enables the OSD menu to be displayed on the output display.
• OSD (On Screen Display) - For simplified setup and configuration.
• HDCP Compliant - HDCP sources are supported only when all connected displays support HDCP.
• Zero Latency.
• Automatic Sleep Mode - After three minutes when no input or link is detected.

APPLICATIONS

• Meeting rooms
• Presentation and multimedia applications
• Short range video and audio distribution

The KDS-EN2T is an IP-based transmitter for HDMI signals. Using JPEG2000 compression technology, the KDS-EN2T sends a visually lossless HD image with digital stereo over a 1000BaseT LAN to a KDS-EN2R receiver for multicasting, video wall and digital signage applications.

• High Flexibility - Flexible and scalable HDMI 1080p for video broadcasting with Gigabit Ethernet LAN.
• High Scalability - Up to 9 transmitters and more than 81 receivers possible in a video wall system, as well as over 200 receivers from each transmitter in multicasting mode.
• Multicasting and Broadcasting Architecture - Each channel requires about 55Mbps.
• Cost Efficient Infrastructure - Transmits an HDMI signal over one CAT5e/6/7 cable.
• HDTV Compatible.
• Controls - Group ID can be defined either via the built-in DIP-switches or by using the remote utility.
• RS-232 Pass-Thru - Controls the HDMI display from the transmitter side.
• Compact DigiTOOLS® - With a built-in mounting plate for versatile installation.

The Audio Video Display System is a distribution system for computer graphics video up to 1080p and mono audio signals. The system, including a broadcaster, splitter and receivers, can distribute input signals over CAT 5 cable to hundreds of displays.

TP-590T is a high-performance, long-reach HDBaseT 2.0 transmitter for 4K60Hz (4:2:0) HDMI, USB, RS-232, and IR signals over twisted pair. TP-590T converts all input signals into the transmitted HDBaseT 2.0 signal. It extends video signals to up 40m (130ft) over CAT copper cables at up to 4K@60Hz (4:2:0) 24bpp video resolution and provides even further reach for lower HD video resolutions.

• High Performance Standard Extender - Professional HDBaseT extender for providing long-reach signals over twisted-pair copper infrastructures. TP-590T is a standard extender that can be connected to any market-available HDBaseT-compliant extension product. For optimum extension reach and performance, use recommended Kramer cables.
• HDMI Signal Extension - HDCP 2.3, EDID and CEC signals are passed through from the source to the display. Supports deep color, x.v.Color™, lip sync, HDMI uncompressed audio channels, Dolby TrueHD, DTS-HD, 2K, 4K, and 3D as specified in HDMI 2.0.
• Flexible USB 2.0 Extension - An active USB host is connected at either the transmitter or receiver side. USB 2.0 signals are extended between the transmitter and receiver, enabling connection of the active USB host to both local and remote USB devices, such as camera and audio devices, or HID (Human Interface Devices) mouse or keyboard devices.
• I-EDIDPro™ Kramer Intelligent EDID Processing™ - Intelligent EDID handling, processing, and pass-through algorithm that ensures Plug and Play operation for HDMI source and display systems.
• Multi-channel Audio Transmission - Up to 32 channels of digital stereo uncompressed signals for supporting studio-grade surround sound.
• Bidirectional RS-232 Extension - Serial interface data flows in both directions, allowing data transmission and device control.
• Bidirectional Infrared Extension - IR interface data flows in both directions, allowing remote control of peripheral devices located at either end of the extended line.
• Cost-effective Maintenance - Status LED indicators for HDMI, HDBT, and USB active host ports, facilitate easy local maintenance and troubleshooting.
• Easy and Elegant Installation - Compact DemiTOOLS™ fan-less enclosure for dropped-ceiling mounting, or side-by-side mounting of 2 units in a 1U rack space with the recommended rack adapter.

APPLICATIONS

• Corporate - Hybrid and online meetings
• Education - Hybrid and online learning and training
• Any AV and USB room extension applications such as conference rooms, boardrooms, and training facilities

Tripp Lite's B132-100A works with a B132-002A-2 or B132-004A-2 local transmitter unit to extend a 1920 x 1440 (60Hz) Video and Audio signal up to 500 ft., or a 1024 x 768 (60Hz) Video and Audio signal up to 1,000 ft.. 24Awg, Solid Wire Cat5e/6 cable, such as Tripp Lite's N022-01K-GY (Cat5) and N222-01K-GY (Cat6), is required to achieve maximum distance and resolution. For optimal image quality between 500 and 1,000 ft., use Zero-Skew cable, such as Tripp Lite P524-01K. Features built-in Equalization and Gain controls to adjust the video image. Includes mounting hardware that allows unit to be wallmounted, rackmounted or pole mounted. Ideal for digital signage situations, such as retail, schools, churches, etc. Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.

More from the Manufacturer