Audio & Video Consoles/Extenders
-
Kramer TP-125XL Video Extender Transmitter - 1 Input Device - 820.21 ft Range - 1 x Network (RJ-45) - 1 x VGA In - WUXGA - 1920 x 1200 - Twisted Pair - Rack-mountable
The TP-125xl is an extended range twisted pair transmitter for computer graphics video, unbalanced stereo audio and bidirectional RS-232 control command signals. It converts the input signals to a twisted pair signal and transmits them over CAT 5 cable to a compatible receiver.
- Max. Resolution - WUXGA & 1080p.
- HDTV Compatible.
- System Range - More than 820ft (more than 250m).
- EDID Capture - Copies and stores the EDID from a display device.
- Cable - We recommend the use of Kramer's BC-XTP high quality skew-free, unshielded twisted pair (UTP) cable. When using UTP cable, it is advisable to ensure that the cable is installed far away from electric cables, motors and so on, which are prone to create electrical interference.
- Bidirectional RS-232 Interface - Commands and data can flow in both directions via the RS-232 interface, allowing status requests and control of the destination unit.
$308.69 -
Kramer Video Extender - 1 Input Device - 1 Output Device - 328.08 ft Range - 1 x Network (RJ-45) - 1 x VGA In - WUXGA - Twisted Pair - Category 5 - Rack-mountable
The TP-125-od is a high-performance twisted pair transmitter for computer graphics video, unbalanced stereo audio and bidirectional RS-232 control command signals. It converts the input signals to a twisted pair signal and transmits them over CAT 5 cable to a TP-126-od receiver.
Learn More$199.93 -
Kramer TP-102HD Video Extender - 1 Input Device - 2 Output Device - 150 ft Range - 2 x Network (RJ-45) - 1 x VGA In - WUXGA - Twisted Pair - Category 5 - Rack-mountable
The TP-102HD is a twisted pair transmitter for computer graphics video and HDTV signals. It converts a computer graphics video or HDTV signal on a 15-pin HD connector to two identical twisted pair signals.
Learn More$216.25 -
Kramer PT-101HXL Video Extender - 1 Input Device - 1 Output Device - 49.21 ft Range - 1 x HDMI In - 1 x HDMI Out - Rack-mountable
The PT-101Hxl is a line driver/repeater for HDMI video signals. The unit reclocks and equalizes the signal enabling multiple units to be cascaded.
Learn More$180.88 -
Kramer OPS-Compatible HDMI Receiver with Ethernet & RS-232 over Extended-Reach HDBaseT - 1 Output Device - 590.55 ft Range - 2 x Network (RJ-45) - 1 x HDMI Out - Full HD - 1920 x 1080 - Twisted Pair
OPS-1 is an OPS-compatible HDBaseT receiver for displays and AV devices with standard Intel OPS-compatible card slots. It is a high-performance, extended-reach HDBaseT 1.0 receiver for full HD HDMI, Ethernet and RS-232 signals over twisted pair. It extends video signals to up to 100m (330ft) over CAT copper cables at up to 1080p@60Hz video resolution.
- High Performance Standard Extender - Professional HDBaseT extender for providing extended-reach signals over twisted-pair copper infrastructures. OPS-1 is a standard extender that can be directly plugged to HDBaseT-compliant OPS-slot of market-available displays and AV products. For optimum extension reach and performance, use recommended Kramer cables.
- HDMI Signal Extension - HDMI 1.4 and HDCP 1.4 compliant. Supports deep color, x.v.Color™, lip sync, HDMI uncompressed audio channels, Dolby TrueHD, DTS-HD, 2K, and 3D. EDID and CEC signals are passed through from the source to the display.
- Multi-channel HDMI Audio Extension - Up to 8 channels of digital stereo uncompressed signals for supporting studio-grade surround sound.
- Ethernet Extension - Ethernet interface data flows in both directions, allowing extension of up to 100Mbps Ethernet connectivity for LAN communication and device control.
- Bidirectional RS-232 Extension - Serial interface data flows in both directions, allowing data transmission and device control.
- Cost-effective Maintenance - Status LED indicator to facilitate easy local maintenance and troubleshooting.
- Easy and Elegant Installation - Directly plugged into OPS-compatible AV devices, drawing power from the device. Provides single cable connectivity for all HDBaseT signals.
- Long-distance AV and LAN signal extension for multi-room, large dividable auditoriums and lecture hall connectivity
$222.93 -
Kramer KW-14R Wireless HD Receiver - 1 Output Device - 100 ft Range - 1 x USB - 1 x HDMI Out - Full HD - 1920 x 1080
The KW-14R is a high-definition, wireless, HDMI receiver for indoor use. Up to four KW-14R receivers can receive from one KW-14T transmitter and up to three KW-14T transmitters can be paired with one KW-14R receiver.
- Max. Data Rate - 6.75Gbps (2.25Gbps per graphic channel), Deep Color up to 12-bit.
- Secure Link - Uses AES-128 bit encryption.
- Connection Capacity - Up to four receivers can receive from one transmitter simultaneously; up to three transmitters associated with one receiver at any given time.
- Transmission Range - Up to 30m (100ft) including through walls and furniture.
- Automatic Frequency Selection - Selects the most suitable frequencies to prevent RF interference.
- Auto EDID Adjustment - To allow multi-screen support.
- IR Remote Control - Enables the OSD menu to be displayed on the output display.
- OSD (On Screen Display) - For simplified setup and configuration.
- HDCP Compliant - HDCP sources are supported only when all connected displays support HDCP.
- Zero Latency.
- Automatic Sleep Mode - After three minutes when no input or link is detected.
APPLICATIONS
- Meeting rooms
- Presentation and multimedia applications
- Short range video and audio distribution
$438.65
