Audio & Video Consoles/Extenders

The ComNet series video transmitters and receivers support the transmission of one, two, or four independent short-haul quality 10-bit digital video signals and one, two, or four contact closures in the direction of the video over multimode or single mode optical fibers. This module is universally compatible with major CCTV camera manufacturers. The receivers are compatible with the FVT10C1(M,S)1[/M] series or FVT1(M,S)1/M single channel transmitters. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required.

The ComNet™ FVR4C4B Video and Contact Closure Receiver unit supports four independent channels of video and four independent dry contact closures over four separate optical fibers. State-of-theart 8-bit digital decoding is utilized for the four video channels. The contact closure channels may be used with triggered-event CCTV camera systems, or other applications such as access controlled gates, doors, or other equipment requiring remote actuation and control. Plug-and-play design ensures ease of installation, and no electrical or optical adjustments are ever required. Bi-color (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status. The high channel density of the FVR4C4B makes this unique product ideal for those installations where space may be limited. Packaged in the exclusive ComNet ComFit housing, these units may be either surface/shelf-mounted or rack-mounted, or may be DIN-rail mounted by the addition of ComNet model DINBKT1 adaptor plate. The FVR4C4B Receiver is fully compatible with ComNet's model FVT1C1B-M Video Transmitter unit.

The ComNet FVT/FVR8018(M)(S)1 Series transmits eight (8) channels of 10-Bit Digital Video along with eight (8) channels of bi-directional data over one single mode or multimode optical fiber. The video quality exceeds RS-250C for short-haul video transmission. This equipment is environmentally hardened and suitable for use in unconditioned roadside or out-of plant installations. The FVT/FVR8018 is compatible with NTSC, PAL and SECAM video transmission protocols and supports bi-directional RS232, 422 and RS485 (2 & 4 Wire) data. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are required.

Bi-Color (RED/GREEN) LED indicators are provided to indicate the status of the system, video and data. Packaged in the exclusive ComNet ComFit housing, these units may be either wall or rack-mounted, or may be DIN-rail mounted by the addition of ComNet model DINBKT1 adaptor plate.

The ComNet FVTDR10-B for the Bosch dome camera system supports the simultaneous transmission of video in one direction and pan tilt and zoom control signals in the reverse direction. The module is compatible with the ComNet FVRDT10M1, which is both a stand alone and rack mount device. The FVTDR10-B supports RS-232 and RS-422 data signals from the receiver to the transmitter and outputs RS-422 data into the Bosch dome. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. The FVTDR10-B is camera mounted and powered by the camera's internal power supply. Bi-color (Red/Green) LED indicators on the receiver are provided for rapidly ascertaining equipment operating status. The receiver module is interchangeable between stand-alone or card mount configurations.

The ComNet FVT/FVR81 video transmitter and video receiver series utilizing state of the art digital encoding and decoding for high-quality video transmission. These environmentally hardened units provide transmission of eight independent video channels over one optical fiber and are ideal for use in unconditioned roadside or out-of-plant installations.

Features for FVT/FVR81 Series

• Digitally encoded video transmission, transmits 8 real-time color video signals
• Exceptionally low video distortion with zero Performance Variation vs. Optical Path Loss
• Designed for installation in harsh out-of-plant/unconditioned industrial or roadside operating environments (-40? to +75?C ambient). Fully compliant with the environmental requirements of NEMA TS-2 for Traffic Signal Control Equipment
• Robust design ensures extremely high reliability in unconditioned out-of-plant environments
• Status indicating LEDs provide rapid indication of critical operating parameters.
• Five year warranty
• Made in the USA
• Voltage transient protection on all power and signal input/output lines provides protection from power surges and other voltage transient events.
• Standard ComFit models are hot-swappable.
• ComFit standard form factor is designed for wall, surface, rack, or DIN rail mount installations (using optional card cage or DIN mounting bracket).