Audio & Video Consoles/Extenders

The ComNet series video transmitters and receivers support the transmission of one, two, or four independent short-haul quality 10-bit digital video signals and one, two, or four contact closures in the direction of the video over multimode or single mode optical fibers. This module is universally compatible with major CCTV camera manufacturers. The receivers are compatible with the FVT10C1(M,S)1[/M] series or FVT1(M,S)1/M* single channel transmitters. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required.

The ComNet series video transmitters and receivers support the transmission of one, two, or four independent short-haul quality 10-bit Digitally Encoded video signals and one, two, or four contact closures in the direction of the video over multimode or single mode optical fibers. This module is universally compatible with major CCTV camera manufacturers.

• NTCIP compatible
• Status indicating LEDs provide rapid indication of critical operating parameters.
• Automatic resettable fuses on all power lines
• Supports one, two or four Contact Closures in the direction of video, ideal for tamper switch, etc.
• Exceptionally low video distortion with zero performance variation vs. optical path
• Distances up to 4 km (2.5 mi) over Multimode Fiber
• Distances up to 54 km (33.6 mi) over Single Mode Fiber
• 12VDC or 24VAC powered FVT10C1/M mini unit can be powered directly from camera
• Voltage transient protection on all power and signal input/output lines provides protection from power surges and other voltage transient events.
• ComFit standard form factor is interchangeable between stand-alone or rack mount use.
• Compatible with NTSC, PAL, or SECAM Video Standards
• 10-bit digitally encoded short-haul video transmission meets the requirements of the EIA RS-250C standard.
• Designed to meet full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions, and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.
• Standard ComFit models are hot-swappable.
• Lifetime Warranty

The ComNet™ FVT1C1B-M Video Transmitter supports transmission of one analog video signal and a single simplex contact closure over one multimode or single mode optical fiber. The contact closure channel may be used with triggered-event CCTV camera systems, or other applications such as access controlled gates, doors, or other equipment requiring remote actuation and control. This module is universally compatible with all major CCTV camera manufacturers. Housed in a compact, rugged, and lightweight package, this surface/shelf-mount unit is ideal for those installations where space may be limited, and may be DIN-rail mounted by the addition of ComNet DINBKT2 Adaptor Plate Kit. Plug-and-play design ensures ease of installation, and no electrical or optical adjustments are ever required. The FVT1C1B(M)(S)1-M Transmitter is fully compatible with ComNet model FVR4C4B(M)(S)4 4-Channel Video/4-Channel Contact Closure Receiver Unit.

The ComNet FVT/FVR160S1 video transmitter and video receiver utilize 10-bit digital encoding and decoding for high-quality video transmission that exceeds the requirements of EIA RS-250C for short-haul video transmission. These environmentally hardened units provide transmission of 16 independent video channels over one optical fiber and are ideal for use in unconditioned roadside or out-of-plant installations. These units are completely transparent to and universally compatible with any NTSC, PAL, or SECAM CCTV camera systems. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status.

The ComNet FVT/FVR160D8 series video transmitter/data transceiver and video receiver/data transceiver series utilize 10-bit digital encoding and decoding for high-quality video transmission that exceeds the requirements of EIA RS-250C for short-haul video transmission. These environmentally hardened units provide transmission of 16 independent video channels and eight bi-directional data channels over one optical fiber and are ideal for use in unconditioned roadside or out-of-plant installations. These units are completely transparent to and universally compatible with any NTSC, PAL, or SECAM CCTV camera systems, data channels can be set independently for RS232, RS422 and 2 or 4-wire RS485, Sensornet, Bi-phase and Manchester.