Audio & Video Consoles/Extenders

The ComNet FVR1C1B receives one channel of video over one optical fiber utilizing 8-Bit digital decoding for high-quality video and contact closure transmission. These environmentally hardened units are ideal for use in unconditioned roadside or out-of-plant installations. This module is universally compatible with major CCTV camera manufacturers.

Features

• Wide optical dynamic range: optical attenuators are never required
• NTCIP compatible
• Robust design ensures extremely high reliability in unconditioned out-of-plant environments
• Status indicating LEDs provide rapid indication of critical operating parameters.
• Automatic resettable solid-state current limiters
• Lifetime Warranty
• Contact closure
• Exceptionally low video distortion with zero Performance Variation vs. Optical Path Loss
• Voltage transient protection on all power and signal input/output lines provides protection from power surges and other voltage transient events.
• ComFit standard form factor is interchangeable between stand-alone or rack mount use.
• Compatible with NTSC, PAL, or SECAM Video Standards
• 8-bit digitally encoded video exceeds all requirements for EIA RS-250C medium-haul transmission.
• Tested and certified by an independent laboratory for full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions and transient voltage protection) of NEMA TS-1/ TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.
• Standard ComFit models are hot-swappable.

The ComNet™ FVR10M video receiver detects an AM video signal on one multimode fiber optic cable. The receiver utilizes Manual Gain Control and is compatible with the ComNet FVT11M and the FVT20 transmitters. Plug-and-play design ensures ease of installation requiring no electrical or optical adjustments. Bi-color (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status. These units are only available in stand-alone configurations.

The ComNet FVT/FVR10D1E series video transmitter/receiver and data transceiver supports the simultaneous transmission of short haul quality 10-bit EIA RS-250C digital video with one bi-directional data channel plus one 10/100 Mbps fast Ethernet port. The modules are universally compatible with major CCTV camera manufacturers and supports RS232, RS422 and 2 or 4-wire RS485 data interfaces and most data protocols. It also supports "up-the-coax" data transmission from most major manufacturers. Packaged in the exclusive ComNet ComFit housing, the FVT/ FVR10D1E units may be either wall or rack-mounted, or may be DIN-rail mounted by the addition of ComNet model DINBKT1 adaptor plate.

The ComNet FVT/FVR10D1E series video transmitter/receiver and data transceiver supports the simultaneous transmission of short haul quality 10-bit EIA RS-250C digital video with one bi-directional data channel plus one 10/100 Mbps fast Ethernet port. The modules are universally compatible with major CCTV camera manufacturers and supports RS232, RS422 and 2 or 4-wire RS485 data interfaces and most data protocols. It also supports "up-the-coax" data transmission from most major manufacturers. Packaged in the exclusive ComNet ComFit housing, the FVT/ FVR10D1E units may be either wall or rack-mounted, or may be DIN-rail mounted by the addition of ComNet model DINBKT1 adaptor plate.

The ComNet series video transmitters and receivers support the transmission of one, two, or four independent short-haul quality 10-bit digital video signals and one, two, or four contact closures in the direction of the video over multimode or single mode optical fibers. This module is universally compatible with major CCTV camera manufacturers. The receivers are compatible with the FVT10C1(M,S)1[/M] series or FVT1(M,S)1/M* single channel transmitters. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required.