Audio & Video Consoles/Extenders
-
ComNet 2 Channel Analog and IP Video over COAX Receiver - 1640.42 ft Range - Twisted Pair, Coaxial - Category 5
The ComNet™ CL(T,R)VE(1,2)COAX[POE][/M] is a communications link that combines composite analog baseband video and 10/100T(X) Ethernet on a single RG59 coaxial cable and transmits it up to 500 meters. The device is particularly suited to applications where the addition of IP Video to an existing analog video system is required. The CLTVE1COAXPOE/M model can provide power to the IP device via PoE.
Learn More$664.90 -
Club 3D CSV-7200 Display Receiver - 1 Input Device - 2 Output Device - 1 x USB - DisplayPort - 4K - 3840 x 2160
Club 3D CSV-7200 Display Receiver - 1 Input Device - 2 Output Device - 1 x USB - DisplayPort - 4K - 3840 x 2160 Learn More -
KanexPro Single HDMI 2.0 Wallplate over HDBaseT 70M w/ IR & POC Receiver Set - 1 Input Device - 1 Output Device - 229.66 ft Range - 1 x Network (RJ-45) - 1 x HDMI In - 4K UHD - Twisted Pair - Category 6
The KanexPro WP-EXTHDBTKIT is a US Decora style single gang HDMI 2.0® wall plate transmitter - receiver set designed for connecting one HDMI device such as a laptop, Blu-ray, or a 4K media player remotely over CAT5/6 up to 230 ft. (70 meters). The outputs is via HDBaseT port and the receiver is included in the box. It supports full 18 Gbps bandwidth with true 4K video resolutions up to 4/60Hz, HDCP 2.2 compliant and will extend 4K up to 40m delivering color sampling rate of 4:4:4.
PoC & Control
The wall plate transmitter supports PoC - power over cable requiring only power supply from the Receiver. Additional receivers can be purchased separately, part# EXT-WP70POC. It also supports bi-directional IR control and RS-232 control for devices to and from the display.
Applications:
Ideal for use with court rooms, classrooms, conference rooms or showrooms where audio-visual devices can be extended from a remotely located HDMI source device. This single-gang HDMI wall plate can be used anywhere to enhance signal integrity over CAT5e/6 cabling.
Learn More$379.68 -
KanexPro VGA 1x2 Extender over CAT5e/6 with Audio up to 1,000ft (300m) - 1 Input Device - 2 Output Device - 1000 ft Range - 4 x Network (RJ-45) - 1 x VGA In - 3 x VGA Out - WUXGA - 1920 x 1200 - Rack-mountable, Surface-mountable
The KanexPro 1x2 VGA extender over CAT5e/6 cable is designed for routing two high-resolution VGA signals and stereo audio over remote distances up to 1,000ft. (300m). Each receiver set features a separate gain and peaking rotary switch used in adjusting brightness and skew over long distances.
The 15-Pin Hd Connectors Are Convenient And Cost-Effective For All Input/ Output Connections Supporting Full Bandwidth Compatible From Vga To Wuxga Graphics Card Resolutions And Hdtv'S To Projectors. In Addition, Each Output Performs A Separate Buffering To Maintain Signal Integrity And Reject Noise Interference.
Learn More$158.93 -
KanexPro 4K HDBaseT 1x4 Distribution Amplifier up to 230 feet (70m) - 1 Input Device - 230 ft Range - 4 x Network (RJ-45) - 1 x USB - 1 x HDMI In - 1 x HDMI Out - 4K - 4096 x 2160 - Twisted Pair - Category 6 - Rack-mountable, Wall Mountable
The KanexPro one HDMI input with four output over HDBaseT is a half-rack width distribution amplifier, which reliably distributes one HDMI source signal to four Ultra HD 4K displays over single CAT6. It can also be daisy -chained to support up to 16-displays without losing any signal integrity using HDBaseT technology.
The SP-HDBT1X4 is HDCP compliant supporting 1080p/60 and Ultra HD 4K resolutions. To make better integration, this DA provides integrator- friendly features such as EDID management, local HDMI output and RS-232 control for 3rd party control systems.
The SP-HDBT1X4 is ideally used for ultra HD signal transmission or broadcasting digital signage and large scale control centers where HD & 4K signals can be sent to 4 and/or 16 displays up to 230 feet (70m) over shielded CAT6.
Learn More$889.29 -
KanexPro HDMI Extender over CAT5/6 up to 165ft. (50m) - 1 Input Device - 1 Output Device - 165 ft Range - 2 x Network (RJ-45) - 1 x HDMI In - 1 x HDMI Out - Full HD - 1920 x 1080 - Rack-mountable
The KanexPro one input over one output HDMI Extender is designed to carry DVI/ HDMI signals over distances beyond the capability of standard HDMI/ DVI cable. It extends video and audio over a single CAT5e/6 cable up to 165ft. (50m) and is compliant with EDID.
In addition, the extender provides auto-adjustment, buffering and signal equalization to maintain pixel-perfect resolution up to HD 1080p/60 depending on the RJ-45 run. To attain full HD 1080p the distance has to be shorter than 100ft. Ideal for relocating your source such as a Blu-ray player or a satellite box to a remotely located display.
Learn More
