Audio & Video Consoles/Extenders
-
ComNet Video Transmitter/Data Transceiver (1310/1550 nm) - 9842.52 ft Range - Optical Fiber - CCTV System - Rack-mountable, Surface-mountable, Wall Mountable, Rail-mountable
The ComNet™ FVT/FVR1014 video transmitter/data transceiver and video receiver/data transceiver series utilize 10-bit digital encoding and decoding for highquality video transmission that meets the requirements of EIA RS-250C for short-haul video transmission. These environmentally hardened units provide transmission of one independent video channel and four bi-directional data channels over one optical fiber and are ideal for use in unconditioned roadside or out-of-plant installations. These units are completely transparent to and universally compatible with any NTSC, PAL, or SECAM CCTV camera systems, data channels can be set independently for RS232, RS422 and 2 or 4-wire RS485 with tri-state support. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status. Packaged in the exclusive ComNet ComFit housing, these units may be either wall or rack-mounted, or may be DIN-rail mounted by the addition of ComNet model DINBKT1 adaptor plate.
Learn MoreRegular Price: $1,090.58
Special Price $1,025.14
-
ComNet FVT1010M1SHR Video Extender Transmitter - 1 Output Device - 6561.68 ft Range - 2 x ST Ports - Optical Fiber - CCTV System - Rack-mountable, Wall Mountable, Surface-mountable, Standalone, Rail-mountable
The ComNet™ FVT/FVR1010SHR series of optical video links provides 10-bit digital video, 6.5 Mhz bandwidth, medium haul video quality, one bi-directional data channel and a "Dual Optical Port" (DOP) Self-Healing Ring (SHR) topology. Up to (8) video transmitters and multiple video receivers can be "Daisy Chained" on one optical fiber.
The Self-Healing Ring (SHR) topology using the Dual Optical Ports (DOP) provide fail safe operation in the event of loss of one fiber or one optical module. Each optical port uses wavelength division multiplexing (WDM) to both transmit and receive on one optical fiber. The data channel supports RS232, RS422 and 2 wire and 4 wire RS485. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red/Green) LED indicators are provided for confirming operating status. Packaged in the exclusive ComNet ComFit housing, these units may be either wall or rack-mounted, or may be DIN-rail mounted by the addition of ComNet model DINBKT1 adaptor plate.
Learn MoreRegular Price: $1,609.43
Special Price $1,512.86
-
ComNet Video Transmitter (1310 nm) - 226377.95 ft Range - Optical Fiber - Rack-mountable, Surface-mountable
The ComNet FVT/FVR1001 series video transmitter/ receiver supports the transmission of short-haul quality 10-bit digitally encoded video over one multimode or single mode optical fiber. This module is universally compatible with major CCTV camera manufacturers.
Features for FVT/FVR1001 Series
- Full color compatibility
- Designed to meet full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions, and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.
- Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required.
- Voltage transient protection on all power and signal input/output lines provides protection from power surges and other voltage transient events.
- Compatible with NTSC, PAL, or SECAM Video Standards
- 10-bit digitally encoded short-haul video transmission meets the requirements of the EIA RS-250C standard.
- Standard ComFit models are hot-swappable.
Regular Price: $888.54
Special Price $835.23
-
ComNet Video Transmitter (1310 nm) - 9842.52 ft Range - Optical Fiber - Rack-mountable, Wall Mountable - TAA Compliant
The ComNet FVT/FVR1001 series video transmitter/ receiver supports the transmission of short-haul quality 10-bit digitally encoded video over one multimode or single mode optical fiber. This module is universally compatible with major CCTV camera manufacturers.
Features for FVT/FVR1001 Series
- Full color compatibility
- Designed to meet full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions, and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.
- Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required.
- Voltage transient protection on all power and signal input/output lines provides protection from power surges and other voltage transient events.
- Compatible with NTSC, PAL, or SECAM Video Standards
- 10-bit digitally encoded short-haul video transmission meets the requirements of the EIA RS-250C standard.
- Standard ComFit models are hot-swappable.
Regular Price: $758.73
Special Price $713.20
-
ComNet FVT10C1M1/M Video Extender Transmitter - 1 Input Device - 13123.36 ft Range - Optical Fiber, Coaxial - CCTV System
The ComNet series video transmitters and receivers support the transmission of one, two, or four independent short-haul quality 10-bit digital video signals and one, two, or four contact closures in the direction of the video over multimode or single mode optical fibers. This module is universally compatible with major CCTV camera manufacturers. The receivers are compatible with the FVT10C1(M,S)1[/M] series or FVT1(M,S)1/M* single channel transmitters. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required.
Learn MoreRegular Price: $360.48
Special Price $338.85
-
ComNet Mini Video Transmitter - 177165.35 ft Range - Optical Fiber, Coaxial - CCTV System - Rack-mountable, Standalone
The ComNet series video transmitters and receivers support the transmission of one, two, or four independent short-haul quality 10-bit Digitally Encoded video signals and one, two, or four contact closures in the direction of the video over multimode or single mode optical fibers. This module is universally compatible with major CCTV camera manufacturers.
Features for FVT/FVR10C1, FVR20C2 and FVR40C4 Series- NTCIP compatible
- Status indicating LEDs provide rapid indication of critical operating parameters.
- Automatic resettable fuses on all power lines
- Supports one, two or four Contact Closures in the direction of video, ideal for tamper switch, etc.
- Exceptionally low video distortion with zero performance variation vs. optical path
- Distances up to 4 km (2.5 mi) over Multimode Fiber
- Distances up to 54 km (33.6 mi) over Single Mode Fiber
- 12VDC or 24VAC powered FVT10C1/M mini unit can be powered directly from camera
- Voltage transient protection on all power and signal input/output lines provides protection from power surges and other voltage transient events.
- ComFit standard form factor is interchangeable between stand-alone or rack mount use.
- Compatible with NTSC, PAL, or SECAM Video Standards
- 10-bit digitally encoded short-haul video transmission meets the requirements of the EIA RS-250C standard.
- Designed to meet full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions, and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.
- Standard ComFit models are hot-swappable.
- Lifetime Warranty
Learn MoreRegular Price: $432.58
Special Price $406.62