Network & Communication
-
HPE AP-615 Tri Band IEEE 802.11 a/b/g/n/ac/ax 3.60 Gbit/s Wireless Access Point - Indoor - 6 GHz, 5 GHz, 2.40 GHz - Internal - MIMO Technology - 1 x Network (RJ-45) - 2.5 Gigabit Ethernet - Bluetooth 5 - 12.50 W - Ceiling Mountable - 10
HPE Aruba Networking 610 series Wi-Fi 6E campus access points
Fast, resilient, and secure Wi-Fi 6E connectivity in a compact and affordable platform
For enterprises who need more wireless capacity and/or wider channels, HPE Aruba Networking 610 Series Campus APs are designed to take advantage of the newly available 6 GHz spectrum using a unique dual-radio/tri-band architecture. Adding support for the 6 GHz band to the traditional 2.4 GHz and 5 GHz bands more than doubles the available wireless capacity in a wireless network - so you can meet growing demand due to bandwidth-hungry video, increasing numbers of client and IoT devices, and growth in cloud.
Unique to the 610 Series features two radios that can be tuned to any two of the three available spectrum bands for Wi-Fi (2.4 GHz, 5 GHz, 6 GHz).
This flexibility provides a cost-effective and compact platform that delivers full tri-band coverage as part of a multi-AP deployment and can be used with software that will intelligently and flexibly configure the radios of each of these dual-radio APs.
More capacity and wider channels
The 610 Series APs are designed to take advantage of Wi-Fi 6E and the 6 GHz band, which translates into far greater speeds, wider channels for multi-gigabit traffic, and less interference. Its two 2x2 MIMO radios deliver a combined peak data rate of up to 3.6 Gbps when configured for concurrent 5 GHz and 6 GHz operation.
Advantages of 6 GHz
Wi-Fi 6E provides up to 1200 MHz of additional unlicensed spectrum in the 6 GHz band for higher throughput and improved application performance. With up to seven 160 MHz channels, Wi-Fi 6E can better support low-latency, bandwidth hungry applications like high-definition video and augmented reality/virtual reality applications. Only Wi-Fi 6E capable devices can use the 6 GHz band so there is no interference or slowdowns due to legacy devices.
Device class support
The 610 Series APs are part of the low power indoor (LPI) device class. This fixed indoor-only class uses lower power levels and does not require an Automated Frequency Coordination service (AFC) to manage incumbent outdoor services, which is required for standard class APs.
Learn More -
Aruba AP-635 Tri Band IEEE 802.11 a/b/g/n/ac/ax 3.90 Gbit/s Wireless Access Point - Indoor - 2.40 GHz, 5 GHz, 6 GHz - Internal - MIMO Technology - 2 x Network (RJ-45) - 2.5 Gigabit Ethernet, Gigabit Ethernet - Bluetooth 5 - 8.70 W - Ceiling Mountable - 5
For enterprises who need more wireless capacity and wider channels, HPE Aruba Networking 630 Series Campus APs are designed to take advantage of the 6 GHz band via three dedicated radios. By using the 6 GHz band, capacity is more than doubled-so you can meet growing demand due to bandwidth-hungry video, increasing numbers of client and IoT devices and growth in cloud. Unique to HPE Aruba Networking, the 630 Series includes ultra tri-band filtering and dual 2.5 Gbps ethernet ports to eliminate coverage gaps, provide greater resiliency, and deliver fast, secure connectivity.
More capacity and wider channels
The HPE Aruba Networking 630 Series APs are designed to take advantage of the 6 GHz band, which translates into far greater speeds, wider channels for multi-gigabit traffic, and less interference. It delivers 3.9 Gbps maximum aggregate data rates Tri-radio, 2x2:2 MIMO in all three bands (3.9 Gbps aggregate peak).
Advantages of 6 GHz
Wi-Fi 6E provides up to 1200 MHz in the 6 GHz band for higher throughput and improved application performance. With up to seven 160 MHz channels, Wi-Fi 6E can better support low-latency, bandwidth hungry applications like high-definition video and artificial reality/virtual reality applications. Only Wi-Fi 6E capable devices can use the 6 GHz band so there is no interference or slowdowns due to legacy devices.
Device class support
HPE Aruba Networking 630 Series APs are part of the low power indoor (LPI) device class. This fixed indooronly class uses lower power levels and does not require an Automated Frequency Coordination service (AFC) to manage incumbent outdoor services which is required for standard class APs. The connectorized models will typically operate as Standard Power access points, but may also be allowed to operate as Low Power Indoor devices in some countries.
Less interference
HPE Aruba Networking 630 Series Access Points include HPE Aruba Networking's ultra tri-band filtering, which enables enterprises to take advantage of the high end of 5 GHz with the lower end of 6 GHz without experiencing interference. Since there is only 50 MHz between 5 GHz and the 6 GHz, without advanced filtering, enterprises would likely experience problems between the bands and would therefore be limited in the number of channels available. By applying advanced filtering capabilities, enterprises can take full use of available spectrum without creating coverage gaps or islands.
Business continuity
The HPE Aruba Networking 630 Series APs provide high availability with two HPE Smart Rate ethernet ports for hitless failover for both data and power. Configurable to 1 or 2.5 Gbps, these dual ports provide business continuity for mission critical applications.
Global readiness
While the need for more Wi-Fi capacity is recognized across the globe, countries are approaching 6 GHz differently. The HPE Aruba Networking 630 Series APs are set up to automatically update regulatory rules once 6E regulations have been approved and certified.
Extend the benefits of Wi-Fi 6
The HPE Aruba Networking 630 Series APs are based on the 802.11ax standard, which means that all its efficiency and security enhancements are also available on the 6 GHz band. Wi-Fi 6 features such as Orthogonal Frequency Division Multiple Access (OFDMA), BSS coloring etc. are fully supported on HPE Aruba NetworkingWi-Fi 6E access points as well.
Learn More -
HPE Comware 5710 Ethernet Switch - Manageable - 10 Gigabit Ethernet, 40 Gigabit Ethernet, 100 Gigabit Ethernet - 3 Layer Supported - 74 W Power Consumption - Optical Fiber - 1U - Rack-mountable - TAA Compliant
- Delivers up to 1,440 Gbps switching capacity for the most demanding applications.
- Low latency, under 1.5 µs 10GbE latency, provides improved throughput and fewer lost packets.
- Provides choices that fit your budget and IT environment by offering different port density and speeds (1/10G) SFP+ or 10BASE-T with 40 and 100GbE high speed uplinks options.
- Affordably priced, with full support for Layer 2, Layer 3, IPv4 and IPv6 networking protocols at no additional cost for these advanced features.
- New made in USA TAA-compliant SKUs offer heightened security via manual and automated source code analysis to address common programming issues, easing concerns about "made in China" products
Accelerate Application Performance
- The HPE Networking Comware Switch Series 5710 are high density, low-latency switches, the perfect solution for bandwidth-intensive workloads.
- Two-tier network design delivers outstanding performance while protecting and extending existing Hewlett Packard Enterprise or 3rd party core network investments.
- Delivers up to 1,440 Gbps switching capacity for the most demanding applications.
- Low latency, under 1.5 µs 10GbE latency, provides improved throughput and fewer lost packets.
Simplify Administration and Support
- The HPE Networking Comware Switch Series 5710 addresses small to mid-size organizations needing fixed high-performance and low-latency 1/10GbE top-of-rack data center switches for server connectivity
- The HPE Networking Comware Switch Series 5710 includes the HPE Intelligent Resilient Framework which reduces administrative touchpoints by making multiple physical switches appear as a single virtual switch from a management perspective.
Reduce Cost and Simplify Operations While Accelerating Performance
- HPE Networking Comware Switch Series 5710 reduces lock-in and having to replace the hardware. Unlike competitive products based on proprietary technology and closed designs, the 5710 Series switch top-of-rack products are based on industry standards and an open architecture.
- Removes hidden software expenses; the all-inclusive HPE Comware Switch license includes a complete set of advanced features.
- High-performance IP-attached switching allows the reduction of equipment and operations expense and complexity and delivers fast connectivity for HPE 3PAR, HPE Nimble, HPE SimpliVity or third-party storage arrays.
Hewlett Packard Enterprise Servers and Networking are Better Together
- HPE Networking Comware Switch Series 5710 helps accelerate performance, simplify operations and contain costs.
- HPE ProLiant Servers, server networking options, HPE Comware top-of-rack switches, transceivers and cables are designed and tested to work better, together.
- Ability to migrate your compute, storage and networking infrastructure to support the most business critical applications - with confidence.
Learn More -
HPE Comware 5710 Ethernet Switch - 48 Ports - Manageable - Gigabit Ethernet, 40 Gigabit Ethernet, 100 Gigabit Ethernet, 10 Gigabit Ethernet - 10/100/1000Base-T, 40GBase-X, 100GBase-X, 10GBase-T - 3 Layer Supported - 108 W Power Consumption - Twisted Pair,
- Delivers up to 1,440 Gbps switching capacity for the most demanding applications.
- Low latency, under 1.5 µs 10GbE latency, provides improved throughput and fewer lost packets.
- Provides choices that fit your budget and IT environment by offering different port density and speeds (1/10G) SFP+ or 10BASE-T with 40 and 100GbE high speed uplinks options.
- Affordably priced, with full support for Layer 2, Layer 3, IPv4 and IPv6 networking protocols at no additional cost for these advanced features.
- New made in USA TAA-compliant SKUs offer heightened security via manual and automated source code analysis to address common programming issues, easing concerns about "made in China" products
Accelerate Application Performance
- The HPE Networking Comware Switch Series 5710 are high density, low-latency switches, the perfect solution for bandwidth-intensive workloads.
- Two-tier network design delivers outstanding performance while protecting and extending existing Hewlett Packard Enterprise or 3rd party core network investments.
- Delivers up to 1,440 Gbps switching capacity for the most demanding applications.
- Low latency, under 1.5 µs 10GbE latency, provides improved throughput and fewer lost packets.
Simplify Administration and Support
- The HPE Networking Comware Switch Series 5710 addresses small to mid-size organizations needing fixed high-performance and low-latency 1/10GbE top-of-rack data center switches for server connectivity
- The HPE Networking Comware Switch Series 5710 includes the HPE Intelligent Resilient Framework which reduces administrative touchpoints by making multiple physical switches appear as a single virtual switch from a management perspective.
Reduce Cost and Simplify Operations While Accelerating Performance
- HPE Networking Comware Switch Series 5710 reduces lock-in and having to replace the hardware. Unlike competitive products based on proprietary technology and closed designs, the 5710 Series switch top-of-rack products are based on industry standards and an open architecture.
- Removes hidden software expenses; the all-inclusive HPE Comware Switch license includes a complete set of advanced features.
- High-performance IP-attached switching allows the reduction of equipment and operations expense and complexity and delivers fast connectivity for HPE 3PAR, HPE Nimble, HPE SimpliVity or third-party storage arrays.
Hewlett Packard Enterprise Servers and Networking are Better Together
- HPE Networking Comware Switch Series 5710 helps accelerate performance, simplify operations and contain costs.
- HPE ProLiant Servers, server networking options, HPE Comware top-of-rack switches, transceivers and cables are designed and tested to work better, together.
- Ability to migrate your compute, storage and networking infrastructure to support the most business critical applications - with confidence.
-
HPE Comware 5710 Ethernet Switch - Manageable - Gigabit Ethernet, 10 Gigabit Ethernet, 40 Gigabit Ethernet, 100 Gigabit Ethernet, Fast Ethernet - 1000Base-X, 10GBase-X, 40GBase-X, 100GBase-X, 100Base-X - 3 Layer Supported - 1 SFP Slots - 74 W Power Consum
Features | Maximize your HPE Networking Comware Switch Series 5710 | What's New
- Delivers up to 1,440 Gbps switching capacity for the most demanding applications.
- Low latency, under 1.5 µs 10GbE latency, provides improved throughput and fewer lost packets.
- Provides choices that fit your budget and IT environment by offering different port density and speeds (1/10G) SFP+ or 10BASE-T with 40 and 100GbE high speed uplinks options.
- Affordably priced, with full support for Layer 2, Layer 3, IPv4 and IPv6 networking protocols at no additional cost for these advanced features.
- New made in USA TAA-compliant SKUs offer heightened security via manual and automated source code analysis to address common programming issues, easing concerns about "made in China" products
-
HPE Comware 5710 Ethernet Switch - 24 Ports - Manageable - 10 Gigabit Ethernet, 40 Gigabit Ethernet, 100 Gigabit Ethernet - 10GBase-T, 40GBase-X, 100GBase-X - 3 Layer Supported - 74 W Power Consumption - Twisted Pair, Optical Fiber - 1U - Rack-mountable -
- Delivers up to 1,440 Gbps switching capacity for the most demanding applications.
- Low latency, under 1.5 µs 10GbE latency, provides improved throughput and fewer lost packets.
- Provides choices that fit your budget and IT environment by offering different port density and speeds (1/10G) SFP+ or 10BASE-T with 40 and 100GbE high speed uplinks options.
- Affordably priced, with full support for Layer 2, Layer 3, IPv4 and IPv6 networking protocols at no additional cost for these advanced features.
- New made in USA TAA-compliant SKUs offer heightened security via manual and automated source code analysis to address common programming issues, easing concerns about "made in China" products
Accelerate Application Performance
- The HPE Networking Comware Switch Series 5710 are high density, low-latency switches, the perfect solution for bandwidth-intensive workloads.
- Two-tier network design delivers outstanding performance while protecting and extending existing Hewlett Packard Enterprise or 3rd party core network investments.
- Delivers up to 1,440 Gbps switching capacity for the most demanding applications.
- Low latency, under 1.5 µs 10GbE latency, provides improved throughput and fewer lost packets.
Simplify Administration and Support
- The HPE Networking Comware Switch Series 5710 addresses small to mid-size organizations needing fixed high-performance and low-latency 1/10GbE top-of-rack data center switches for server connectivity
- The HPE Networking Comware Switch Series 5710 includes the HPE Intelligent Resilient Framework which reduces administrative touchpoints by making multiple physical switches appear as a single virtual switch from a management perspective.
Reduce Cost and Simplify Operations While Accelerating Performance
- HPE Networking Comware Switch Series 5710 reduces lock-in and having to replace the hardware. Unlike competitive products based on proprietary technology and closed designs, the 5710 Series switch top-of-rack products are based on industry standards and an open architecture.
- Removes hidden software expenses; the all-inclusive HPE Comware Switch license includes a complete set of advanced features.
- High-performance IP-attached switching allows the reduction of equipment and operations expense and complexity and delivers fast connectivity for HPE 3PAR, HPE Nimble, HPE SimpliVity or third-party storage arrays.
Hewlett Packard Enterprise Servers and Networking are Better Together
- HPE Networking Comware Switch Series 5710 helps accelerate performance, simplify operations and contain costs.
- HPE ProLiant Servers, server networking options, HPE Comware top-of-rack switches, transceivers and cables are designed and tested to work better, together.
- Ability to migrate your compute, storage and networking infrastructure to support the most business critical applications - with confidence.
Learn More
