Network & Communication
-
C2G Dual 4K HDMI® HDBaseT + VGA, 3.5mm, and RS232 over Cat Switching Extender Box Transmitter to Ultra-Slim Box Receiver - 4K 60Hz - 1 Output Device - 230 ft Range - 2 x Network (RJ-45) - 1 x USB - 2 x HDMI In - 1 x VGA In - 1 x HDMI Out - 1080p - 4K
The HDMI Ultra-Slim HDBaseT + RS232 And IR over Cat Extender Box Receiver - 4K 60Hz allows a 4K HDMI source to be extended up to 130ft to a 4K display using a single Cat6a Ethernet cable. This is an ideal solution where HDMI video and audio need to be extended to displays in conference rooms, classrooms, lecture halls, and many other installation needs that are far beyond the length limitations of standard HDMI cabling.
This wall plate transmitter and box receiver accepts HDMI signals over a single network patch cable. Extend 4K HDMI up to 115 feet and 1080p up to 230 feet using a Cat5e or Cat6 cable. For longer 4K distances, extend 4K HDMI or up to 130 feet using a Cat6a cable.
This HDMI HDBaseT set is HDCP 2.2 compliant, making sure that the connection from the source is secure. With bi-directional PoC support, one power adapter at either transmitter or receiver side can power both units, so no additional power adapter is required, allowing for greater flexibility in installations. Advanced users can control bi-directional IR and RS232 pass through.
Note: Ensure a solid reliable connection between the 4K HDMI HDBaseT Extender and critical equipment. We suggest using HDMI Cables with gripping connectors that provide greater port retention than standard HDMI connectors.
Note: Stranded Cat5e/6/6a patch cables may be used for HDMI extension applications up to 230ft. Shielded, solid conductor Cat6 or HDBaseT Certified Cat6a network cabling is recommended for applications where the category cable must be coiled, is run near other high-frequency signaling cables, or in high EMI/RFI environments. For best performance use an HDBaseT Certified Cat6a Patch Cable.
Learn More$627.99 -
Ortronics Huawei QSFP28 Module - For Optical Network, Data Networking - 1 x LC Duplex 100GBase-SWDM4 Network - Optical Fiber - Multi-mode - 100 Gigabit Ethernet - 100GBase-SWDM4 - 100 Gbit/s - 0.10 km Maximum Distance
Ortronics Huawei QSFP28 Module - For Optical Network, Data Networking - 1 x LC Duplex 100GBase-SWDM4 Network - Optical Fiber - Multi-mode - 100 Gigabit Ethernet - 100GBase-SWDM4 - 100 Gbit/s - 0.10 km Maximum Distance Learn More$1,098.90 -
Ortronics H3C SFP Module - For Optical Network, Data Networking - 1 x LC Duplex 1000Base-EX Network - Optical Fiber - Single-mode - Gigabit Ethernet - 1000Base-EX - 1 Gbit/s - 40 km Maximum Distance
Ortronics H3C SFP Module - For Optical Network, Data Networking - 1 x LC Duplex 1000Base-EX Network - Optical Fiber - Single-mode - Gigabit Ethernet - 1000Base-EX - 1 Gbit/s - 40 km Maximum Distance Learn More -
Ortronics H3C SFP+ Module - For Optical Network, Data Networking - 1 x LC Duplex 10GBase-LRM Network - Optical Fiber - Single-mode, Multi-mode - 10 Gigabit Ethernet - 10GBase-LRM - 10 Gbit/s - 0.30 km Maximum Distance
Ortronics H3C SFP+ Module - For Optical Network, Data Networking - 1 x LC Duplex 10GBase-LRM Network - Optical Fiber - Single-mode, Multi-mode - 10 Gigabit Ethernet - 10GBase-LRM - 10 Gbit/s - 0.30 km Maximum Distance Learn More -
C2G HDMI HDBaseT + USB-B to A + RS232 Over Cat Extender Box TX to Box RX (18Gbps) 4K 60Hz up to 328ft - 1 Input Device - 1 Output Device - 328 ft Range - 2 x Network (RJ-45) - 5 x USB - 1 x HDMI In - 1 x HDMI Out - 1080p - 4K - Twisted Pair - Category 6a
The HDMI® HDBaseT + USB-B to A and RS232 over Cat Extender (18Gbps) allows for the extension of a 4K HDMI source up to 328ft to a 4K display without signal loss using a single Cat6a Ethernet cable. This is an ideal solution where USB must also be extended alongside HDMI video and audio to interactive whiteboards and displays or in any installation that goes far beyond the length limitations of standard HDMI and USB cabling.
This HDMI HDBaseT 3.0 kit supports 5Play features, including the combined delivery of uncompressed ultra-high-definition digital video and audio, Ethernet, control signals, USB 2.0, and up to 100W of power through a single, 100m/328ft Cat6a LAN cable. The uncompressed digital video fully supports 4K 60Hz (4:4:4) HDMI signals and all audio formats in the HDMI 2.0 specification. The Ethernet pass-through transmits 1GB of data. The featured dip switch allows for RS232 pass-through and the added convenience of field firmware updating. USB 2.0 supports streaming cameras, connected peripherals, and storage devices. With one-way Power over HDBaseT (PoH) support, one power adapter connected to the receiver powers both the transmitter and receiver, so no additional power adapter required, allowing for greater flexibility in installations.
Learn More$1,561.99 -
C2G HDMI HDBaseT + VGA, 3.5mm, and USB-B to A over Cat Extender Wall Plate Transmitter to Box Receiver - 4K 60Hz - 2 Input Device - 1 Output Device - 230 ft Range - 2 x Network (RJ-45) - 7 x USB - 1 x HDMI In - 1 x VGA In - 1 x HDMI Out - 1080p - 4K - Twi
The HDMI HDBaseT + VGA, 3.5mm, and USB-B to A over Cat Extender Dual Gang Wall Plate Transmitter to Box Receiver - 4K 60Hz allows a 4K HDMI source to be extended up to 130ft to a 4K display using a single Cat6a Ethernet cable. This is an ideal solution where USB must be extended alongside HDMI video and audio to interactive whiteboards and displays in conference rooms, classrooms, lecture halls, and many other installation needs that are far beyond the length limitations of standard HDMI cabling.
Learn More
The transmitter extends HDMI, VGA, Stereo Audio, and high speed USB 2.0 signals over a single Cat5e, Cat6 or Cat6a network patch cable. Extend 4K HDMI up to 115 feet and 1080p VGA up to 230 feet using a Cat5e or Cat6 cable. For longer 4K distances, extend 4K HDMI up to 130 feet using a Cat6a cable.
This HDMI HDBaseT Extender is HDCP 2.2 compliant, making sure that the connection between the source and display is secure. Automatic switching is supported by the transmitter, connecting to the last active source. One-way analog audio pass through is supported from the transmitter to the receiver. High-speed USB 2.0 pass through is supported over HDBaseT up to 230ft for KVM control of devices such as USB cameras, keyboards, mice, etc. With PoH support, the receiver can send power to the wall plate transmitter, so no additional power adapter is required, allowing for greater flexibility in installations. Support this HDBaseT system that is already deployed in the field by upgrading firmware through the Micro-USB port on front panel of the wall plate transmitter, and upgrade the firmware through the RS232 port on rear panel of the receiver.$611.48
