Network & Communication

eBridge1ST EoC transceiver transmits data at 25Mbps over Coax cable to a paired eBridge receiver and provides power in a PoE+ compliant format to an enabled device/camera. The eBridge receiver is available in various options (see compatibility list below/Altronix.com), including built-in midspan, or for use with an external midspan, such as the Altronix Netway series to facilitate network applications. The receiver passes PoE+ power over the same coax cable to the eBridge1ST transceiver, which, in turn passes this power to an enabled IP camera/device. These plug and play units facilitate cost-effective solutions for IP devices. They can be installed at distances greater than 500m. They provide a simple way to replace legacy analog products with new IP devices over existing coax. Applications:

• Retrofit digital IP cameras in an analog CCTV installation.
• Works with IP Megapixel and non Megapixel cameras.
• Extend Network link distance in an industrial environment over 610m.
• Upgrade deployed CCTV Coax to a digital network in Retail, Casinos, Airports, Schools, Hospitals, etc.

eBridge200B long range PoE Ethernet transceiver/media converter transmits data and power over Coax or CAT5 cable over distances that are 3 to 5 times greater than standard Ethernet. Upgrading existing Coax analog camera infrastructure to IP cameras is greatly simplified as well. Two PoE cameras/devices can be attached. eBridge200B supports PoE, PoE+ or a single Hi-PoE (60W) device. eBridge200B offers built-in IP management which allows for remote camera reset, monitoring, and reporting via various IP protocols. There is no need to install remote AC mains power since these devices are simply powered from the low voltage PoE midspan/endspan equipment, such as Altronix NetWay midspans or eBridge100SPR.

eBridge200WPM PoE Ethernet transceiver/media converter transmits data and power over Coax or CAT5 cable over distances that are 3 to 5 times greater than standard Ethernet. Upgrading existing Coax analog camera infrastructure to IP cameras is greatly simplified as well. eBridge200WPM can support up to two PoE or PoE+ cameras/devices or a single Hi-PoE (60W) device. The eBridge200WPM/WPMH offers built-in IP management which allows for remote camera reset, monitoring and reporting via various IP protocols. There is no need to install remote AC mains power, since these devices are simply powered from the low voltage PoE midspan/endspan equipment, such as Altronix NetWay midspans or eBridge100SPR.

Altronix Netway5A is a space-saving hardened switch board that mounts easily inside of Altronix enclosures, improving installation efficiency. It is an ideal solution in all Maximal and Trove series products, allowing for the connection of up to 4 IP devices within the enclosure - utilizing a single Ethernet cable going to the headend.

Altronix Netway5B is a space-saving hardened switch board that mounts easily inside of Altronix enclosures, improving installation efficiency. It is an ideal solution in all Maximal and Trove series products, allowing for the connection of up to 4 IP devices within the enclosure - utilizing a single Ethernet cable going to the headend.