SCSI/RAID Controllers

High-Performance 8-Channel PCIe Gen3 M.2 NVMe Connectivity Solution

R1000 Series NVMe HBAs are fully independent, stand-alone NVMe storage solutions for PCIe Gen3 platforms; they are not tied to a specific motherboard, chipset or operating system, can be easily integrated into any motherboard or server/workstation platform with a free PCIe 3.0/4.0 x16 and are capable of supporting off-the-shelf M.2 NVMe SSDs of any capacity.

The Rocket 1108 is the industry's fastest PCIe Gen3 NVMe connectivity HBA. The eight independent device ports can support off-the-shelf M.2 SSDs of any capacity.

Built-in High-speed, Intelligent Switch Chipset

The Rocket 1108 NVMe HBA's performance-focused hardware architecture leverages intelligent PCIe switch technology to ensure maximum transfer bandwidth is available for each device port, at all times. Up to x4 lanes of host bandwidth are allocated to each M.2 NVMe SSD, as needed.

Native, In-Box NVMe Device Driver Support

HighPoint NVMe HBAs were designed with simplicity in mind. All you need is a little patience and a screwdriver; just install the M.2 SSD's and plug in the card!

Rocket 1000 Series HBAs are natively supported by all major Windows and macOS operating system platforms, VMware ESXi and current distributions of Linux.

You won't need to juggle a series of device drivers, install a complex software suite, or master a specialized management interface. Your NVMe SSDs will be automatically recognized, and can be prepped and mounted using the operating system's standard tool set.

Ultra-High-Performance NVMe Storage Solution

Rocket 1000 Series NVMe HBA's can host RAID arrays created using the operating systems built-in storage management tools.

macOS Disk Utility and Windows Disk Management can configure RAID 0 arrays using 2 or more NVMe SSDs.

Supports any Off-the-Shelf M.2 NVMe SSD | Any Capacity, Any Generation & Any Form-Factor..

Rocket 1000 series M.2 ports are capable of supporting any industry standard off- the-shelf M.2 NVMe SSD

NAND Form Factor: Single & Double-Sided

M.2 Form Factor: 2280, 2260, 2242

Low-Noise Hyper Cooling Solution

The Rocket 1108 employs our new ultra- efficient, Hyper-Cooling solution designed specifically for large M.2 configurations. The Hyper-Cooling system combines a high-conductivity thermal pad with an anodized aluminum heatsink equipped with dual built-in, low noise fans. This design ensures the M.2 SSDs, NVMe chipset and RAID componentry remain cool, even under heavy load, while minimizing the risk of distraction in the work environment.

Professional Class SAS 12Gb/s RAID Solutions

RocketRAID 3700 series host bus adapters capitalize on HighPoint's two decades of RAID and storage technology to deliver professional grade RAID storage at a fraction of the cost of conventional host RAID solutions. Each adapter is powered by our industry proven RAID technology, superior Gen 3.0 PCIe express transfer bandwidth, and up to sixteen dedicated 12Gb/s SAS channels, which support robust, high-performance RAID 0, 1, 5, 6, 1/0, 5/0 and JBOD configurations of SAS or SATA hard drives of any disk format, including 512, 512e and 4Kn.
RocketRAID 3700 series host bus adapters are designed to maximize the uptime and accessibility of RAID storage. RocketRAID storage and RAID recovery solutions enhance data retrieval from failed disks and streamline rebuild sessions.
The universal RocketRAID WebGUI interface provides a wide range of preemptive monitoring and maintenance features that enable administrators to easily schedule verification sessions to ensure the health of each RAID storage configuration.

Seamlessly Upgrade RAID Storage

RocketRAID 3700 adapters deliver an unprecedented level of flexibility when it comes to storage configurations. Customers are free to expand or convert RAID storage configurations as needed to keep on top of the evolving demands of the storage application, without sacrificing existing data. Online Capacity Expansion (OCE) allows administrators to add new drives to existing arrays in order to expand available capacity. Online RAID Level Migration (ORLM) allows administrators to convert one RAID level to another in order to tune storage configurations for maximum performance or data security.
Arrays created with RocketRAID 3700 series adapters are future-proof; Online RAID Roaming allows customers to move existing RAID arrays to other 3700 series RAID controllers, in addition to all future HighPoint RAID products.

Customized Solution Services for SMB Customers

HighPoint offers a range of Customized Solution services for SMB Customers. We can tailor RocketRAID 3700 host bus adapters to meet the requirements of client defined storage applications across Linux, Windows and macOS platforms, and are ready to assist Solution Providers with unique product branding. A full API library is available for integration projects and we offer a variety of Enclosure Management services including SGPIO, SES-2 and I2C.

Multi-HBA Solution

HighPoint's multi-HBA (host bus adapter) Non-RAID solution software packages are available for all major operating system platforms including Windows, Linux and macOS. The RocketRAID 3700 device driver enables up to four independent cards to work in unison, and effectively function as a single 64-channel 12G SAS host controller. This innovative approach to direct-attached mass storage connectivity allows customers to simplify the build process, streamline maintenance procedures, and provides dedicated SAS 12Gb/s point-to-point bandwidth for each connected device. The robust, versatile, device driver allows administrators to keep tabs on the operational status of each card and individual storage device via the RocketRAID 3700's intuitive web-based management interface.

External SAS/SATA Storage Solution

The RocketRAID 3742A can now be paired with the Highpoint RocketStor 6418S or RocketStor 6414S external JBOD enclosures via our new 8644-8088-1M1 SAS Certified Cable, to support up to 8 external hard drives or SSD's.

The Ultimate PCIe Gen3 NVMe Booting Solution | Introducing the SSD7105 - The Ultimate Gen3 NVMe Booting Solution

Powered by our next generation NVMe hardware architecture, industry-proven RAID stack, and comprehensive boot capability, the SSD7105 delivers unbeatable performance and versatility, all packaged in a compact device no larger than your average video adapter. The SSD7105 is a direct replacement for the SSD7103 and was designed for easy integration into any Intel or AMD based desktop, server or workstation PC with a free, dedicated PCIe 3.0/4.0 x16 slot, and can deliver up to 14,000MB/s of transfer performance and support up to 4 individual boot volumes, in single-drive or RAID modes.

Comprehensive OS Support

Comprehensive device driver support is available for Windows 11 and 10, Server 2022 and 2019, and Linux Distributions such as RHEL, Debian, Ubuntu, Fedora, Proxmox and Xenserver. In addition, we offer Binary driver development services, and Open- Source driver packages for other or non- standard distributions.

Advanced Bootable NVMe RAID Technology

The SSD7105 NVME RAID controller can be used to configure bootable RAID or single NVMe SSD configurations for Windows and Linux systems. Optional UEFI downloads and complete installation guides are available for each supported platform.

RAID 10 (Security & Speed) - RAID 10 requires a minimum of 4 NVMe SSD's and is comprised of a stripe between two RAID 1 arrays. RAID 10 capable of delivering read performance on par with RAID 0, and is superior to RAID 5 for NVMe applications. Unlike RAID 5, RAID 10 doesn't necessitate additional parity related write operations, which reduce the TBW life span of NVMe SSD's.

RAID 0 (Speed) - Also known as a "stripe" array, this mode delivers Maximum Performance, and requires a minimum of 2 NVMe SSD's.

RAID 1 (Security) - This mode creates a hidden duplicate of the target SSD, and requires 2 NVMe SSD's to configure. RAID 1 is ideal for bootable volumes.

Expanded Compatibility

The third generation SSD7105 was designed for easy integration into industry standard motherboard platforms using off- the-shelf M.2 SSD's. It has been extensively tested with a wide range of commercially available M.2 NVMe drives from all major manufacturers, including MLC, TLC & QLC models, in a variety of hardware environments across both Windows, Linux and Mac platforms.

Redesigned Ultra-Efficient, Low-Noise Hyper-Cooling Solution

The SSD7105 incorporates advancements first introduced by our PCIe Gen4 solutions specifically, Highpoint's Low-Noise Hyper- Cooling solution which ensures your NVMe SSDs consistently operate within recommended temperature thresholds, even under sustained heavy I/O, by combining a full-length anodized aluminum heat sink with an ultra-durable, near-silent fan, and high- conductivity thermal pad. This innovative, ultra- efficient cooling system rapidly transfers waste heat away from critical NVMe and controller componentry, without introducing unwanted distraction into your work environment.

Comprehensive NVMe RAID Management Suite

The WebGUI is an intuitive graphical interface that works with any web browser, and is ideal for users of any skill level, while the CLI (command line interface) is a powerful, text-only interface designed for advanced users & professional administrators.

Both interfaces share universal layouts across all major operating systems, can be administered locally or remotely via an internet connection, and allow users to configure a real-time event log with email notification.

• New Low-Profile Bootable NVMe Solution for Linux & Windows
• Ideal for compact, low-profile 1 &2U servers, or workstation
• Flexible solution: compatible with PCIe x8 and x16 slots
• Up to 2 off-the-shelf M.2 MLC, TLC & QLC NVMe SSD's
• RAID 0, 1, single disk
• Dedicated PCIe 3.0 x8 bus bandwidth
• Dedicated PCIe 3.0 x4 bandwidth for each NVMe M.2 SSD

The Industry's 1st Low-Profile, Bootable NVMe RAID Controller for Windows & Linux

HighPoint's third-gen SSD7202 is the industry's first is ultra-compact, low-profile, bootable NVMe RAID solution for Windows and Linux platforms, and can deliver nearly7,000MB/s of transfer performance from a pair of off-the-shelf M.2 SSD's. Each SSD7202 controller benefits from our industry-leading NVMe RAID architecture, and can support striping, mirroring or single disk configurations for up to 2 M.2 NVMe SSD's.

3rd Generation NVMe Architecture

Our third-generation NVMe architecture utilizes our Smart-Switching PCIe 3.0 x8 host interface to ensure broad compatibility with a wide range of hardware platforms without compromising performance; the dedicated x8 bandwidth enables the SSD7202 to maximize transfer speeds for up to two M.2 SSD's.

The SSD7202 also features a unique, two-stage cooling solution; a card-length heat sink with integrated low-noise fan ensures the NVME SSD's and critical chipset components remain cool even under load.

Comprehensive Boot Capability

The dual M.2 channels can support individual boot drives or a bootable RAID array. Customers can easily tune the NVMe configuration for maximum performance or security.

HighPoint's SSD7749M PCIe 4.0 x16 8-Channel M.2 NVMe RAID controller was designed for Industrial and Edge Server applications that demand a compact, easily integrated high-density RAID storage solution with blistering PCIe Gen4 x16 performance and enterprise class 24/7 reliability.

The SSD7749M is a simple, cost-efficient PCIe Gen4 RAID storage upgrade solution for Intel and AMD x86, and ARM server platforms. The controller can directly host up to eight 22110 form-factor M.2 SSDs at speeds up to 28,000MB/s, yet is no larger than a modern dual-width PCIe graphics adapter, and can be easily integrated into systems with a free PCIe 4.0 x16 slot.

Key features:

• Up to 8x 22110 Form factor M.2 SSDs
• Directly Hosts over 32TB of Datacenter class NVMe storage
• Dedicated PCIe Gen4 x16 Host Bandwidth delivers up to 28,000MB/s
• Cross-Sync Technology: Scale Up to x32 Lanes of Gen4 Transfer Bandwidth
• RAID 0, 1, 10 & Singe Disk
• Advanced Cooling Solution Prevents Thermal Throttling
• Toolless SSD Installation
• For Linux, macOS & Windows