Information Technology

TRENDnet's compact 10GBASE-T to SFP Fiber Media Converter, model TEG-10GSFP, converts a 10GBASE-T (Copper 10Gbps) ethernet connection to 10G BASE-SX/LX (Fiber) SFP media connection , and vice versa. The 10GBASE-T RJ-45 port on the 10G SFP+ transceiver supports a full-duplex 10G connection at wire speed. The SFP slot supports both multimode (SX) or single-mode (LX) SFP modules.

DEVICE INTERFACE: 1 x 10G/5G/2.5G/1G Ethernet Port; 1 x 10G/1G SFP+ Slot; LED Indicators
MULTI-GIG SLOT: 1 x 10G RJ-45 Port that supports 10G, 1G speeds.
MULTI-GIG SFP: 1 x 10Gbps SFP+ Slot that supports 10G,1G speeds.
POWER ADAPTER: Included with this 10G SFP fiber media converter is a power adapter that allows for standalone use
COMPACT DESIGN: The small and compact design of the SFP+ to 10G RJ-45 adapter allows for greater installation flexibility.
FIBER WAVELENGTH: The SFP slot accommodates multimode or single-mode transmissions
COMPLIANCE: The SFP converter is NDAA/ TAA Compliant (U.S. and Canada Only)

More from the Manufacturer

• SC-type single-mode fiber port connects over distances of up to 60km
• 10/100Base-TX port supports Auto-Negotiation, Auto-MDIX and Full-Duplex mode
• Supports port level SNMP management
• Functions as a stand alone converter or with the TFC-1600 fiber chassis
• Lifetime TRENDnet Manufacturer's Warranty
• NDAA / TAA compliant (U.S. and Canada only)

The TFC-110S60i Intelligent Fiber Converter works with the TFC-1600 chassis system or as standalone unit. This converter is a Single Mode SC-Type fiber converter that supports SNMP management and spans distances of up to 60km (37.2 miles). Ports include 1 x 10/100Base-TX (RJ-45) port and 1 x 100Base-FX fiber port (SC-Type).

Compliant with IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX / 100Base-FX standards

One 10/100Base-TX auto-negotiation RJ-45 port

Auto MDIX for 10/100Base-TX port and one 100Mbps fiber port with single-mode SC-type connector

Provides Dip switch to set: Fiber (FDX/HDX), Ethernet (Forced/Auto-Negotiation), Ethernet Speed (10M/100M), LLR (Enable/Disable), LLCF (Enable/Disable)

Half / Full-Duplex mode selector on Fiber port

Support LLCF (Link Loss Carry Forward, Link Pass Through)

Support LLR (link Loss Return) for FX port

Monitor and configure Ethernet or Fiber's duplex mode, speed, LLCF, LLR, and receive link down information via management module (TFC-1600MM) and chassis (TFC-1600)

Status LED indicators for Power, Link/Activity, Full-Duplex, Link Fail, and Speed

Wall-Mountable

Optional 19" system chassis with redundant power supply (TFC-1600), holds up to 16 TFC series Media Converters

Lifetime TRENDnet Manufacturer's Warranty

PACKAGE CONTENTS

TFC-110S60i

Multi-Language Quick Installation Guide

Power Adapter (5V, 1A)

More from the Manufacturer

• Provides SNMP reporting and supports port based management
• Real-time stats show converter speed, link activity, and duplex status
• Command line interface via the console port or telnet
• Web-based management via the gigabit port
• Supports SNMP v1 / v2c / v3
• Reports cooling fan and power supply status
• Lifetime TRENDnet Manufacturer's Warranty

The TFC1600MM module supports the management of media converters and power supplies installed in the TFC-1600 fiber chassis. This module provides instant access to cooling fan and power supply status, and allows the user to configure and monitor the state of the chassis by means of a workstation with support for SNMP, or from a PC via web browser.
Event Notifications
Be notified when an event notification is raised and correct error conditions in a timely manner to maintain network uptime. Supports cold / warm start, link up / down, authentication failure, power supply on / off, connected / disconnected, module connected / disconnected, and unknown failure.
Configuration
Configure settings such as link loss carry forward / link loss return, module name, reset module, download software via HTTP, IP address / subnet mask / default gateway, and redundant backup.
Real-time Monitoring
Real-time monitoring provides the latest statistics on link status, slot occupied, revision, converter type, and part number.
PACKAGE CONTENTS
TFC-1600MM
CD-ROM (MIB & User's Guide)
RJ-45 to RS-232 console cable (100 mm / 3.94 in.)