Information Technology

Connect your Lexmark

The RS-232C Serial Interface Card installs into the printer's internal port. It supports a standard RS-232C interface using a 25-pin D-shell female connector.

Features

Configuration settings for the serial interface are available using the Serial Opt Menu from the printer's operator panel. Baud rates from 1200 to 115.2K are supported.

Baud rates:1200, 2400, 4800, 9600*, 19.2K, 38.4K, 57.6K and 115.2K; 7 bit or 8* data bits; Parity - Odd, Even, None*, Ignore; Start and Stop Bits; DSR/DTR Data Flow control with DTR pacing, DTR/DSR, XON/XOFF, XON/XOFF/DTR, or XON/XOFF/DTR/DSR flow control protocols. * indicates factory defaults.

RS-422 is not supported.

The MarkNet N8372 adds 802.11 a/b/g/n/ac wireless connectivity to Lexmark devices via network infrastructure or Wi-Fi Direct for mobile users. The Lexmark N8370/N8372 also supports dual band connectivity for both 2.4 GHz and 5 GHz wireless networks.

Installation and control

Management security: Built-in SNMPv3 supports encrypted and authenticated management traffic, protecting remote configuration and device status messages.

Easy installation: Simply slide the wireless card into the internal solutions port. Other models require an included card-mounting pod, or plugging a wireless module into the Lexmark device's USB connection.

Enhanced security

Wireless encryption support: Resist wireless tampering or eavesdropping with WEP Encryption (64- and 128- bit key), Wi-Fi Protected Access (WPA2™) Personal level security, and Wi-Fi Protected Access (WPA2™) Enterprise level security. You control who can access the printer via standard Wi-Fi.

Network layer protection: Included IPsec support can be used with both IPv4 and IPv6 TCP/IP networks for encryption and authentication of communications at the network layer.

One print server-two functions

Connect network users: The wireless print server function adds 802.11a/b/g/n/ac connectivity to Lexmark devices, and can be configured as part of your network infrastructure.

Support direct printing: Support for Wi-Fi Direct allows users of smartphones and tablets (Android, iOS) to print wirelessly without spending time or effort configuring network access.

Continuous, secure control: The embedded Web page allows administrators to flash-update device firmware or access its settings using a web browser for easy monitoring of device status and changes to default settings.

The MarkNet N8370 adds 802.11 a/b/g/n/ac wireless connectivity to Lexmark devices via network infrastructure or Wi-Fi Direct for mobile users. The Lexmark N8370/N8372 also supports dual band connectivity for both 2.4 GHz and 5 GHz wireless networks.

Installation and control

Continuous, secure control: The embedded Web page allows administrators to flash-update device firmware or access its settings using a web browser for easy monitoring of device status and changes to default settings.

Easy installation: Simply slide the wireless card into the internal solutions port. Other models require an included card-mounting pod, or plugging a wireless module into the Lexmark device's USB connection.

Management security: Built-in SNMPv3 supports encrypted and authenticated management traffic, protecting remote configuration and device status messages.

Network layer protection: Included IPsec support can be used with both IPv4 and IPv6 TCP/IP networks for encryption and authentication of communications at the network layer.

Enhanced security

Wireless encryption support: Resist wireless tampering or eavesdropping with WEP Encryption (64- and 128- bit key), Wi-Fi Protected Access (WPA2™) Personal level security, and Wi-Fi Protected Access (WPA2™) Enterprise level security. You control who can access the printer via standard Wi-Fi.

Support direct printing: Support for Wi-Fi Direct allows users of smartphones and tablets (Android, iOS) to print wirelessly without spending time or effort configuring network access.

One print server-two functions

Connect network users: The wireless print server function adds 802.11a/b/g/n/ac connectivity to Lexmark devices, and can be configured as part of your network infrastructure.