Information Technology

Connects Your USB Device to a Wired Ethernet Network without an Internet Card Installed

This USB to LC fiber optic Ethernet adapter allows you to instantly connect your computer, laptop, tablet or other USB-compatible device to a wired 10/100/1000 Mbps fiber optic network, even if your device has no NIC (Network Interface Controller) installed. The adapter offers access to a Gigabit Ethernet network when Wi-Fi is unavailable or when a wired connection offers faster speeds. It transmits data up to 5 kilometers (3.1 miles) from your fiber network using a wavelength of 1310nm.

Hot-Swappable for Installation Without Network Interruption

This USB 3.0 LC Fiber Transceiver Ethernet adapter is fully hot-swappable, so you can install it without a potentially costly network shutdown or device reboot. Just connect the built-in USB cable to your device's USB port (which also powers the adapter), and connect the LC duplex port to a high-speed managed switch, router or hub using existing or newly run singlemode fiber cable (such as Tripp Lite's N370-Series, sold separately).

Delivers Full Gigabit Ethernet Performance with Audio and Video Streaming

The compact USB to Ethernet adapter supports full 1 Gbps network speeds and USB 3.0 speeds, allowing you to transfer data efficiently and stream audio and video. The direct fiber connection minimizes the risk of data leaks and electromagnetic interference (EMI). A blue LED indicates successful Ethernet connection and data transfer. The adapter works with Windows, Mac, Linux and Microsoft Server operating systems.

The U336-U03-GB USB 3.0 SuperSpeed to Gigabit Ethernet NIC Network Adapter allows you to turn a single SuperSpeed USB 3.0 computer port into an RJ45 Gigabit network port. It also creates three new additional USB 3.0 hub ports with each port supporting data transfer speeds up to 5 Gbps.

This USB 3.0-based NIC lets you connect to your home or office network at full Gigabit speeds with support for 10/100/1000 Mbps. It supports features such as Wake-on-LAN (WoL), VLAN tagging and Jumbo Frames.

The U336-U03-GB is backward compatible with USB 2.0 and USB 1.x standards and will support older USB devices. It can also be used with older systems that do not have USB 3.0 ports (network speed limited by USB 1.x/2.0 bus), allowing you to utilize USB 3.0/2.0/1.x devices.

More from the Manufacturer

If your tablet, laptop, Ultrabook, Chromebook or computer doesn't have a built-in memory card reader, but does have a USB port, the U352-000-MD-AL USB 3.0 SuperSpeed Multi-Drive Memory Card Reader/Writer can easily transfer data between your device and a wide variety of memory cards.

The U352-000-MD-AL supports USB 3.0 transfer speeds up to 5 Gbps, which is 10 times faster than USB 2.0. Backward compatible with previous USB generations, so data can still transfer regardless of your device. Compact aluminum case with built-in 6-inch USB cable fits easily into your pocket, backpack, briefcase or laptop bag, so you can read and write files at a moment's notice. No software, drivers or external power supply required.

Supporting the latest industry standards, the U352-000-MD-AL is compatible with a wide range of SD (Secure Digital), Micro SD and CF (CompactFlash) memory cards, including:

• SD Cards: Secure Digital (SD), Elite Pro SD, Extreme III SD, Gaming Edition SD, Platinum II SD, SD Pro, SDHC, SDXC, SD-Max, SD-Pleomax, SD-Pro C, Super SD, Turbo SD, Ultima I SD, Ultima II SD, Ultimate SD, Ultra High Speed SD, Ultra II SD, Ultra II SD Plus, Ultra SD, Ultra-X SD, DV-RS MMC, High Speed MMC/RS-MMC, MCCmobile, MMC Pro, MMCplus, MMCplus Turbo, RS-MMC
• Micro SD Cards: MicroSD (TransFlash), microSDHC
• CF Cards: CompactFlash Type I/II, CF Elite Pro, CF PRO I, CF PRO II, CF Turbo, CF Ultima I, CF Ultima II, Extreme CF, Extreme III CF, HS CF, Ultra II CF

More from the Manufacturer

If your computer, tablet or laptop doesn't have a built-in memory card reader, but does have a USB port, the U352-06N-SD USB 3.0 SuperSpeed SD/Micro SD Memory Card Media Reader is an essential tool. It easily transfers photos, documents, HD video and other files from a wide variety of memory cards to your device. Just plug the built-in USB cable into your device's USB slot, and insert an SD or Micro SD card to begin reading files. All the latest memory card formats are supported. You can access two cards at the same time.

If your device has a USB 3.0 port, the U352-06N-SD transfers data at speeds up to 5 Gbps, which is 10 times faster than USB 2.0 card readers. It's backward compatible with previous USB generations, so data can transfer regardless of your device. The compact unit fits easily into your backpack, briefcase or laptop bag, so you can access memory card files at a moment's notice. No software, drivers or external power supply required. Compatible with all USB-enabled operating systems.

Features

High-Speed Data Transfer to Your Device

• Recommended for transferring photos, documents, HD video and other files from a memory card to your computer, tablet or laptop
• Allows for the simultaneous connection of multiple memory cards
• Supports latest memory card formats, including SDXC and SDHC
• Supports USB 3.0 data transfer rates up to 5 Gbps
• Backward compatible with previous USB generations
• Allows access to two memory cards at the same time

Plug-and-Play Convenience

• Fits easily into your backpack, briefcase or laptop bag
• No software, drivers or external power supply required
• Compatible with all USB-enabled operating systems

More from the Manufacturer

Tripp Lite's U360-004-IND is a rugged, all metal, USB 3.0 SuperSpeed 4-Port hub is ideal for use in data centers, work areas and Industrial applications. Can be mounted on a wall or din rail with included mounting hardware. Supports SuperSpeed USB 3.0 transfer rates at 5 Gbps, but is also backward compatible to USB 2.0 and 1.1 (480mbps and 12mbps). Hub is bus-powered through the computer connection, or can self power with an external adapter (not included) or via the included 3-wire terminal block connector (9-40V DC).

Features

• Increases the number of SuperSpeed USB 3.0 ports from a single computer port
• USB 3.0 compliant with data transfer rates up to 5 Gbps
• Backward-compatible with USB 2.0 and 1.x
• Rugged all-metal enclosure designed for use in industrial applications
• Wallmount and DIN rail hardware included for secure installation
• Three power connection options (source USB port, external power supply (*not included) or 3-wire terminal block)
• Each USB 3.0 port provides up to 900 mA of power
• Overcurrent detection and protection
• Supports 2 kV surge protection per port
• ESD protection to +/- 20 kV
• EFT protection to +/- 2.5 kV
• Automatic link and speed detection
• Plug-and-play; no software or drivers required

More from the Manufacturer