Eaton Tripp Lite Series DisplayPort to HDMI over Cat6 Extender Kit, Wall Plate, 4K 60 Hz, 4:4:4, PoC, HDCP 2.2, 230 ft. (70.1 m), TAA - 1 Input Device - 1 Output Device - 230 ft Range - 2 x Network (RJ-45) - 1 x HDMI In - 1 x HDMI Out - DisplayPort - 4K U

Features l Cat6 Extender Kit Ideal for Digital Signage in Schools, Restaurants and Lecture Halls

This complete wall-plate-style transmitter and receiver system is recommended for video presentations in conference rooms, schools, trade shows, meeting facilities, houses of worship, retail settings, hotels and other digital signage applications where the source and display are farther apart than conventional A/V cables allow. Both the transmitter and receiver have a single-gang metal wall plate design with a metal back cover and blend perfectly into the room décor.

Extends a 4K A/V Transmission up to 230 ft....or Even Farther
The B127A-1A1-FDFH extends 4K signals from a DisplayPort source device to an HDMI display up to 230 feet (70.1 meters) away via user-supplied Cat6 cabling. By adding a Tripp Lite B127A-010-H HDMI repeater (sold separately) to the application, you can extend the signal up to 400 feet (121.9 meters).

Transmits Crystal-Clear 4K Video with Multi-Channel Audio and 4:4:4 Color
The B127A-1A1-FDFH supports Ultra HD resolutions up to 3840 x 2160 (4K x 2K) at 60 Hz, as specified in HDMI 2.0, with pass-through LPCM 2.0/5.1/7.1 audio. HDCP 2.2 compliance allows you to stream 4K Amazon and Netflix content with no complications. This extender kit also supports 4:4:4 chroma subsampling for top-level PC gaming or using your HDTV as a PC monitor. Built-in equalization automatically fine-tunes the image quality at the remote display.

Built-In PoC Technology Provides Power to Avoid Bulky External Power Bricks
After you connect the included external power supply to either the transmitter or receiver, Power over Cable (PoC) technology powers the opposite unit over Cat6 cable. LEDs on both the transmitter and receiver will light up to indicate the system is receiving power and a signal is being transmitted. PoC lets you avoid the hassle of a bulky power brick and gives you the freedom to install the application where best needed without worrying about finding a nearby AC outlet.

Local HDMI Port on Transmitter Supports 4K @ 60 Hz Resolution
To monitor the video signal being extended to the receiver, connect a 4K display to the transmitter's local HDMI port with a user-supplied HDMI cable. This port does not support multi-resolution capabilities, so the connected monitor must also support 4K/60 Hz to function properly.

Plug-and-Play Operation for Quick Setup and Immediate Use
The included transmitter and receiver units work right out of the box with no software required. Connect the transmitter to the source with a user-supplied DisplayPort cable (such as Tripp Lite's P580-Series). Then, connect the receiver to the display with a user-supplied HDMI cable (such as Tripp Lite's P569-XXX-CERT or P568-XXX-2A). Finally, connect the two units with user-supplied Cat6 patch cable (such as Tripp Lite N202-Series). Mounting hardware is included for both units.

TAA-Compliant for GSA Schedule Purchases
The B127A-1A1-FDFH is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.

Typical Applications

  • Extend video signals from one room to another using Cat6 cable, which can pass through conduit to meet building codes
  • Gain flexibility in where the transmitter or receiver is installed, with the freedom to install it away from an AC outlet
  • Improve the line of sight for digital signage in a hotel, restaurant, theater, house of worship, trade show or other location

Availability: Call or email

$220.00
$220.00

Fast shipping on all in-stock products

Quick turnaround on RFQs - email us today.

Buy from a certified veteran-owned small business (VOSB)

Questions? Call customer service at 503-208-8410.

Description

Details

Eaton Tripp Lite Series DisplayPort to HDMI over Cat6 Extender Kit, Wall Plate, 4K 60 Hz, 4:4:4, PoC, HDCP 2.2, 230 ft. (70.1 m), TAA - 1 Input Device - 1 Output Device - 230 ft Range - 2 x Network (RJ-45) - 1 x HDMI In - 1 x HDMI Out - DisplayPort - 4K UHD - 3840 x 2160 - Twisted Pair - Category 6 - Wall Plate - TAA Compliant

OVERVIEW:

  • Limited Warranty : 1 Year
  • Graphics Modes : 4K UHD
  • Connectivity Technology : Wired
  • Color Family : White
  • Package Contents :
    • Transmitter
    • Receiver
    • External power supply (Input: 100-240V, 50/60 Hz, 0.6A; Output: 24V 1A)
    • 4 x International plug adapters (North America, Europe, U.K. and Australia)
    • Mounting Hardware
    • Owner's Manual
  • Media Type Supported : Twisted Pair
  • Network (RJ-45) : Yes
  • Number of Input Devices Supported : 1
  • Product Color : White
  • Twisted Pair Cable Standard : Category 6
  • Maximum Video Resolution : 3840 x 2160
  • Number of Output Devices Supported : 1
  • Transmitter Height : 11.50"
  • Maximum Operating Distance : 230 ft
  • Transmitter Width : 7"
  • Country of Origin : Taiwan
  • HDMI In : Yes
  • Transmitter Depth : 3.38"
  • TAA Compliant : Yes
  • HDMI Out : Yes
  • Receiver Height : 11.50"
  • Receiver Width : 7"
  • Environmentally Friendly : Yes
  • Receiver Depth : 3.38"
  • Form Factor : Wall Plate
  • Transmitter Weight (Approximate) : 1.43 lb
  • Receiver Weight (Approximate) : 1.43 lb
  • Environmental Compliance : Registration, Evaluation, Authorization and Restriction of Chemicals (REACH)
  • Environmental Compliance : Restriction of Hazardous Substances (RoHS)
  • DisplayPort : Yes
  • Number of Network (RJ-45) Ports : 2
  • Number of HDMI Inputs : 1
  • Number of HDMI Outputs : 1
  • Additional Info

    Additional Info

    SKU 01731B127A1A1FDFH-BF
    Weight 1.0000
    Is Featured N/A
    Manufacturer Tripp Lite by Eaton
    Manufacturer Part Number B127A-1A1-FDFH
    Width 1
    Length 1
    Height 1
    Product ID 01731B127A1A1FDFH
    UNSPSC N/A
    Other Part Number N/A
    Special Price N/A