Component Speakers

AtlasIED IP-SM indoor wall / ceiling mount IP speakers with talkback leverage the VoIP Communication solution to extend tele-presence with enhanced audio for those environments where network-wide communication is desired and that require large speakers with high output to overcome high ambient noise areas or large spaces.

AtlasIED IP-SM registers as a communication endpoint directly within InformaCast, and SA-Announce Advanced Notification applications, supporting audio broadcast to enhance physical security while improving day-to-day communications through advanced alerting, bell schedules, pre-recorded, scheduled announcements, & intercom, while leveraging the WAN/LAN Network Architecture.

When used within a Cisco Environment, these same IP speakers from AtlasIED can join Cisco's Unified Survivable Remote Site Telephony (SRST) as a supported device within SRST endpoint Architecture. Cisco's SRST provides remote location call-processing redundancy when access to the centralized Cisco Unified Communications Manager is interrupted because of a WAN outage. The ability of LAN communication between any combination of phones and speakers is particularly critical during an emergency (which may be the actual cause of the WAN outage).

Where 3rd party notification applications are not required, the I8SM+ speakers can register as SIP devices directly to a SIP server or VoIP Communications Manager for critical alerts /public address applications and two-way communication.

Ideal for Corporate Applications, Education Institutions, Entertainment Complexes, Industrial Facilities, Government Buildings, Healthcare Facilities, Houses of Worship, Transportation Hubs - anywhere critical alerts / public address needs exist, and prefer using a single enterprise-class communications platform.

Features

IP-SM indoor speakers are fitted with an 8" (205mm) coaxial speaker that is optimized for voice intelligibility.

The grills for the IP-SM IP speakers are made of 18-gauge metal construction that provides security and durability in commercial applications. The baffle is finished in neutral white electrostatic powder coat and is packaged with all necessary mounting screws.

IP-SM includes an omni directional subminiature, electret condenser microphone that is mounted behind the grille's steel perforation material adjacent to the speaker to allow two-way communication and/or monitoring from the speaker location to any PC or phone handset.

All Atlas IP speakers consist of a factory assembled speaker, grill, and PCB amp/control board that is securely mounted to the rear of the grill.

The IP-SM features include auto-provisioning and auto-registration. This is an easy and time-saving way to configure our IP speakers on your Voice VLAN, similar to a VoIP handset. By sitting on the same VLAN, both VoIP phones and IP speakers share the same Quality of Service (QoS) so communications are always secure and guaranteed

Features include GPI/O ports offer trigger for intercom request, critical alert notification, or unified connectivity of third party systems.

Minimize the effort required to specify, install and configure a complete professional quality audio system for conferencing. To utilize this solution, simply load the associated system site file into the CONVERGE Pro system and connect the included microphones, speakers and controller.

Speaker type
2-way, ceiling speaker with
metal back can
Frequency range 65 Hz to 20 kHz,
Power handling
60 Watts RMS
120 Watts PEAK
Nominal sensitivity 88 dB, 1W@1m
Nominal coverage
angle
110° conical coverage
Nominal impedance 8 ohms
Transformer taps
70V:: 30W, 15W, 7.5W,
3.8W, 1.9W, 8 ohms 100:
null, 30W, 15W, 7.5W, 3.8W,
8 ohms
Woofer
6.5" (165 mm) polypropylene
cone with moisture
resistant coating
Tweeter 3/4" (19 mm) silk dome
Overload protection
Full range power limiter with
the 8 ohm direct input only,
protecting the tweeter,
woofer, and crossover.

A complete conference room solution with flexibility in mind. The INTERACT AT includes all the necessary audio equipment and peripherals for any conference room while delivering exceptional audio quality at an affordable price. Customize your solution with multiple microphones and speaker options, direct connection to enterprise telephones, USB audio, a room controller, plus the ability to connect to the rich-media systems.

CLEARONE LOUDSPEAKERS
Ceiling or wall-mount options provide premium sound.

The Crestron® FS6 is an attractive, compact loudspeaker designed for multimedia presentation and speech reinforcement in classrooms and other indoor applications. It features a 6.5" long-throw woofer delivering extended bass response through a dual tuned bass reflex design. High frequencies are crisp and smooth thanks to the 1" wide-dispersion soft dome tweeter. Careful design of the enclosure and crossover assures natural, detailed midrange to cut through the noise of a classroom environment.

A pair of FS6 speakers provides exceptional sonic performance and wide coverage for a typical classroom, and a second pair may be employed to cover larger rooms. Each speaker boasts power handling up to 80 Watts, and may be used with any amplifier from 5 to 120 Watts. Clean, versatile mounting is provided via adjustable "C" brackets, which may be oriented horizontally or vertically.

FS6 speakers are available in white or black. They are priced individually, but must be ordered in pairs.

Key Features

• Compact, high-performance 2-way speaker
• Long-throw 6.5" woofer and 1" wide-dispersion soft dome tweeter
• Dual tuned bass reflex ports for extended bass
• Attractive high-impact plastic housing with protective metal grille
• Adjustable surface mount bracket included
• 80 Watts power handling
• 56 Hz to 20 kHz frequency response
• Available in white or black