Consumer Electronics

The Crestron® AMP-X300 is a high performance, space saving, energy efficient, professional grade amplifier solution that is totally configurable, yet simple to use. Whether you need a stereo amp that mounts on a wall or under a table, or a multichannel rack mount amp with multiple output types and power levels, the AMP-X300 is simple to specify and install in any configuration.

LoZ (4/8 Ω) and Hi-Z (70V or 100V) Output

The AMP-X300 is a 4-channel amplifier (up to 75 W per channel) which can also be configured for 3-channel bridged operation (up to 75 W per single ended channel and up to 150 W for the bridged channel), or 2-channel bridged operation (up to 150 W per channel), or 1 channel bridged operation (up to 300 W), with a choice of "LoZ" outputs to drive 4- or 8-Ω speakers, or "Hi-Z" outputs to drive a distributed speaker system (70V or 100V). Balanced and unbalanced inputs are provided for connection to two stereo or four mono source(s) via detachable terminal blocks or RCA connectors.

Solid & Efficient Performance

The AMP-X300 is engineered to deliver exceptional performance and reliability with low distortion, low noise, and high power headroom. Advanced Class D technology maximizes efficiency to reduce power consumption and heat dissipation. An internal universal power supply ensures consistent performance at varying line voltages.

Convection Cooling

The efficient design ensures cool running operation and long-term reliability. The AMP-X300 is high-density stackable with other Crestron modular amps, allowing multiple units to be installed vertically in an equipment rack without needing extra ventilation space.

Modular Design

The AMP-X300 is housed in a half-width rack-mountable form factor that can be installed individually or ganged together in a single rack space. The amplifier ships complete with all the hardware required for installation. Rack and surface mount parts are included, so no additional mounting accessories or rack shelves are required.

Whether mounting in a rack, attaching to a flat surface, or placing on a shelf, it is easy to combine two amplifiers into a single assembly.

Fully Protected

The AMP-X300 features protection against overheating, shorted or overloaded speaker lines, excessive input signals, and other faults. In the case of a shorted speaker line or overheating condition, both outputs mute automatically until the fault condition is resolved. In the event of a prolonged fault, such as an internal component failure, the outputs mute instantly and the amplifier shuts down.

ENERGY STAR® Certified

An energy-efficient design enables the AMP-X300 to meet demanding ENERGY STAR requirements. In addition to its high efficiency under operation, the AMP-X300 draws no added inrush current during power-up, thereby reducing AC circuit requirements and allowing multiple units to be connected to a single switched circuit. To reduce energy usage further, the AMP-X300 can be configured to enter a low-power standby state if no input signal is detected on either channel for 25 minutes. Signal detection has been optimized for sensitivity to improve response time when triggering the amplifier to the "on" state, allowing it to return to full operation within a half-second the instant an input signal is detected. A remote input can be connected to a contact closure to place the amplifier outputs in controlled standby mode.

USB Speakerphone & Camera
The UC-SB1-CAM comprises a high performance AEC enabled speakerphone and camera. It is designed for integration with a computer running UC conferencing or web collaboration software, and can also be used for general presentation of computer based AV content. A single USB 3.0 connection provides a plug and play interface to a computer.

The soundbar behaves like most USB Audio or USB Video Class devices, enabling use as a speaker, microphone, and camera for all types of multimedia applications running on a computer. Even if you're not on a call, you can use the smart soundbar to share content with everyone in the room, or make a professional recording of the meeting.

Superb Sound Quality
The soundbar facilitates conversations with exceptional audio fidelity and pickup. Its integrated 180° far field microphone array faithfully captures voices throughout the room using adaptive beamforming technology. Its high powered, two way stereo speakers produce full, rich and real sounding audio. High performance AEC technology achieves transparent full duplex performance free of distracting echo or noise. Additional digital signal processing assures optimal sound quality for an immersive experience.

Intelligent HD Camera
The integrated Huddly IQ™ camera features an ultra wide angle 150° diagonal field of view to capture an entire conference room in Full HD 1080p video resolution. High precision aspherical optics, 12 MP CMOS sensor, and advanced video processing ensure an immersive, crystal clear video image free from light or noise artifacts or optical aberrations.

Genius Framing digital autozoom intelligently detects the people in the room and frames them perfectly for an optimal view. With Genius Framing, there's no need to control the camera manually or rely on stored presets. When conferencing, the camera image adjusts automatically to frame everyone in the shot.1 People counting analytics detects and reports the number of people in frame for analysis by room utilization software.2

Enhanced Functionality
The UC-SB1-CAM integrates seamlessly with a wide variety of computer based UC platforms. Plug and play USB connectivity enables control of the soundbar through the computer without requiring extra remotes or a control system. The computer detects the soundbar connection automatically, and the soundbar responds when an online meeting is started, speaker volume is adjusted, or the speaker or mic is muted. On the front of the soundbar, operational status is displayed by a multicolor LED status bar that illuminates as the volume is increased, and changes colors to indicate connection and mute status.

Saros® speakers by Crestron deliver professional grade performance and flexible installation for demanding commercial or residential applications.

The SAROS SMT6T-AW-W-T-EACH is a surface-mountable, all-weather, 2-way speaker featuring a 6 in. (165 mm) IMPP woofer for deep, defined low end. A 1 in. (25 mm) ceramic-coated aluminum tweeter provides crisp highs with consistent coverage across a wide listening area. A built-in 60 Watt multi-tap transformer allows for use with 70 or 100 Volt distributed speaker systems. The power handling is an impressive 110 W (program) with a wide frequency response from 65 Hz to 20 kHz (±3 dB).

The SAROS SMT6T-AW-W-T-EACH features a clean and contoured enclosure with weatherized construction. It can be mounted to most solid flat surfaces using the included brackets and painted to blend with the surrounding architecture. The speaker comes with a rectangular grille, and a preconstruction mounting kit (SPKA-PMK-SMT6T-W-T) is available as an accessory. The preconstruction mounting kit can be purchased prior to receiving the speaker to prepare an installation for speaker and cabling positioning. A safety tether kit (SPKA-ST-15) can also be purchased separately and installed to make the speaker compliant with the UL 2239 standard.

Key Features

• High-performance 2-way surface mount speaker
• Designed for high reliability in both indoor and outdoor applications
• 6.5 in. (165 mm) Injection-Molded Polypropylene (IMPP) woofer
• 1 in. (25 mm) ceramic-coated aluminum tweeter
• IPX6 rated for water and weatherized construction
• UL 1480A safety rated speaker for commercial and professional use
• 110 W Program, 200 W Peak (8 Ω)
• Built-in 60 Watt 70/100V multi-tap transformer
• 65 Hz to 20 kHz (±3 dB) frequency response
• 8 Ω nominal impedance
• Paintable to blend with surroundings
• Mounting mechanism allows for pan or tilt
• Suitable for both Residential and Commercial applications

The SAROS IC6ULPT-W-T-EACH+ is a 2-way in-ceiling speaker featuring a 4 in. woofer and titanium 1 in. dome tweeter. Its low profile enclosure allows for installation in ceiling spaces as shallow as 2.4 in. (61 mm). A built-in 30 W multi-tap transformer allows for use with 70V and 100V distributed speaker systems. Power handling at 8 Ω is 35 W (program), with a frequency response from 120 Hz to 20 kHz (±3 dB).

The SAROS IC6ULPT-W-T-EACH+ is designed for quick and easy installation and years of reliable performance. Its zero-bezel frameless grille achieves an unobtrusive and contemporary appearance well-suited for use in restaurants, retail spaces, houses of worship, universities, and office buildings. Installing the grille requires no hardware or tools, utilizing powerful magnets to hold it in place. A safety tether is included to prevent the grille from falling from the ceiling.

Mounting the speaker is facilitated using swiveling mounting dogs integrated into the enclosure. The mounting dogs feature two positions to accommodate standard and thick surfaces up to 1 in. (25 mm). A tile bridge is included to provide proper support when installed in a typical drop-tile ceiling. The tile bridge is adjustable to enable off-center speaker positioning, and can be folded to fit through the speaker cutout. A rigging point is also provided on the speaker enclosure for securing to the building structure using an optional safety tether kit (SPKA-ST-15, sold separately).

An integral metal back can is employed to meet the requirements of UL® 2043 for installation in a plenum space. A short length of two wire speaker cable extends from the back can of the speaker for a connection back to an amplifier using wire nuts (not included). Setting the 70/100V transformer tap is performed via a screwdriver-adjustable control located on the front baffle, behind the grille. The speaker housing also meets IPX5 ratings for splash resistance.

SAROS IC6ULPT-W-T-EACH+ speaker grilles can be painted to blend with the ceiling surface. The speakers are priced individually, but must be ordered in pairs.

Key Features

• High-performance, ultra low profile 2-way in-ceiling speaker
• Requires only 2.4 in. mounting depth
• Built-in 30 W 70/100V multi-tap transformer
• IPX5 rated for splash resistance
• Zero-bezel frameless grille for a clean, contemporary appearance
• Two-step swiveling dog mounting system for quick and easy installation
• Includes tile bridge for installation in a drop-tile ceiling
• 35 W program power handling at 8 Ω
• Coverage up to 140° for music content or 150° for speech
• Paintable to blend with surroundings

The SAROS IC6VLPT-W-T-EACH+ is a 2-way in-ceiling speaker featuring a 6.5 in. woofer and wide dispersion, horn loaded 1 in. dome tweeter. Its low profile enclosure allows for installation in ceiling spaces as shallow as 4 in. (102 mm). A built-in 60 W multi-tap transformer allows for use with 70V and 100V distributed speaker systems. Power handling at 8 Ω is 50 W (program), with a frequency response from 65 Hz to 20 kHz (±3 dB).

The SAROS IC6VLPT-W-T-EACH+ is designed for quick and easy installation and years of reliable performance. Its zero-bezel frameless grille achieves an unobtrusive and contemporary appearance well-suited for use in restaurants, retail spaces, houses of worship, universities, and office buildings. Installing the grille requires no hardware or tools, utilizing powerful magnets to hold it in place. A safety tether is included to prevent the grille from falling from the ceiling.

Mounting the speaker is facilitated using swiveling mounting dogs integrated into the enclosure. The mounting dogs feature two positions to accommodate standard and extra thick surfaces up to 2.4 in. (61 mm). A tile bridge is included to provide proper support when installed in a typical drop-tile ceiling. The tile bridge is adjustable to enable off-center speaker positioning, and can be folded to fit through the speaker cutout. A rigging point is also provided on the speaker enclosure for securing to the building structure using an optional safety tether kit (SPKA-ST-15, sold separately).

An integral metal back can is employed to meet the requirements of UL® 2043 for installation in a plenum space. The wiring connection is accessible behind a rear cover panel by removing a single screw. Setting the 70/100V transformer tap is performed via a screwdriver-adjustable control located on the front baffle, behind the grille.

SAROS IC6VLPT-W-T-EACH+ speaker grilles can be painted to blend with the ceiling surface. The speakers are priced individually, but must be ordered in pairs.

Key Features

• High-performance, very low profile 2-way in-ceiling speaker
• Requires only 4 in. mounting depth
• 6.5 in. polypropylene woofer with damped cloth surround for tight, controlled bass and clear midrange
• Wide-dispersion, horn-loaded titanium dome tweeter for crisp, clear high frequencies and enhanced pattern control
• Built-in 60 W 70/100V multi-tap transformer
• Zero-bezel frameless grille for a clean, contemporary appearance
• Two-step swiveling dog mounting system for quick and easy installation
• Includes tile bridge for installation in a drop-tile ceiling
• 50 W program power handling at 8 Ω
• 95° nominal coverage pattern
• Paintable to blend with surroundings