Antennas
-
Taoglas G30 Antenna - 698 MHz to 960 MHz, 1710 MHz to 2170 MHz, 2500 MHz to 2800 MHz - Cellular Network, Wireless Data Network, GSM Intercom System - Black - Wall/Panel/Screw - Omni-directional - SMA Connector
This G30.wm , wall mounted G30 Olympian antenna is a high performance screw mount wide - band cellular antenna with stainless steel L- bracket to allow it to be mounted on a wall or panel. Omni - directional high gain and high efficiency across all bands ensures constant reception and transmission. This is vital for today's high data bandwidth applications in video and mobile broadband.
Learn More
Durable UV resistant ABS housing is resistant to vandalism and direct attack. At only 48mm in height it is small enough to mount unobtrusively in most locations . This ant enna is mounted on metal and plastic structures and is locked from the inside of the structure by a nut. Adhesive foam at the base provides a watertight seal to the mounting structure. High quality waterproof and corrosion resistant Teflon jacket RG316 is used for the cable.
Two of these G30 separated at distance from each other are ideal for the latest LTE MIMO spatial diversity applications.
Customized cable length and connectors are available. Taoglas recommend a minimum cable length of 70mm when used on a ground plane to achieve an efficiency of greater than 40% in the 900MHz band and greater than 60% in the 1800MHz band. For longer cable lengths and if 700MHz band is required, it is necessary to use the MA740 Pantheon for 2G/3G/4G or the MA 741 2g/3G/4G MIMO Pantheon.Regular Price: $46.65
Special Price $35.03
-
Taoglas Shanghai Magnetic Mount 698-2700MHz LTE Antenna - 698 MHz to 2700 MHz - Cellular NetworkMagnetic/Adhesive - Omni-directional - SMA Connector
The Shanghai GA.130 4G magnetic wideband cellular antenna delivers stable, omni-directional gain and highest efficiencies across all common 4G, 3G & 2G global cellular bands from 698 MHz to 2.7 GHz. This sculpted high performing antenna can be used for all cellular devices and will not require changing antennas when deploying from most major markets worldwide such as 4G to 3G. This antenna can either be mounted magnetically on a metal surface or via the 3M adhesive if non-metal surfaces.
Learn More
A reliable return loss of <10dB, when mounted on a metal plate, ensures the antenna complies with the industry standards set by module makers and networks worldwide.
Taoglas recommends using the antenna with 2m cable length or less and can provide customized connectors and cable lengths upon customer request. The strong magnetic base is extremely stable and robust, using only high-quality neodymium magnets for a secure magnetic mount to ensure a high pull force to disengage.
An adhesive mount, GA.131.201111 and permanent mount option, GA.132.201111 are also available upon request. For further information, please contact your regional Taoglas sales office for support.Regular Price: $26.04
Special Price $24.48
-
Taoglas Phoenix GSA.8827 LTE I-Bar Adhesive Antenna, SMA(M), 1M RG-174 - 703 MHz to 803 MHz, 824 MHz to 894 MHz, 880 MHz to 960 kHz, 1710 MHz to 1880 MHz, 1575.42 MHz to 1575.45 MHz, 1850 MHz to 1990 MHz, 1710 MHz to 2170 MHz, 2490 MHz to 2690 MHz - Cellu
The GSA.8827 Phoenix Ultra-Wideband I-Bar antenna is a robust high efficiency cellular antenna for use with all 4G/3G/2G cellular modules worldwide.
Learn More
Its slim-line design allows for covert and convenient installation in automotive vehicles, its omnidirectional gain across all bands ensures constant reception and transmission. GSA.8827 is manufactured and tested in a TS16949 first tier automotive approved facility, and it has gone through full PPAP design, reliability and quality audits.
The Phoenix finds its application particularly in first-tier automotive application, aftermarket and telematics.
With its unique ultra-wide band dipole design, the Phoenix has exceptional industry performance characteristics considering its very low profile at 7.7mm and has a compact size of only 105mm*30mm.
This antenna is designed to be mounted on glass or plastic (not on metal). It comes with strong 3M double-sided adhesive for a permanent and secure fix to your vehicle interior. The antenna is UV Resistant. Cable lengths and connectors are fully customizable.Regular Price: $28.71
Special Price $26.99
-
Taoglas I-Bar GSA.8841 4G/3G/2G LTE Adhesive Mount Antenna, 1M NFC-200 - 698 MHz to 960 MHz, 4800 MHz to 6000 MHz, 1710 MHz to 1990 MHz, 1920 MHz to 2170 MHz, 2400 MHz to 2500 MHz, 2500 MHz to 2700 MHz, 1565 MHz to 1612 MHz - Cellular Network, Wireless Da
The GSA.8841 LTE Wideband I-Bar Antenna is an external adhesive mount solution on glass and plastic for automotive and telematics applications. It covers not only LTE, but all Cellular, ISM and Wi-Fi working frequencies in the 700-6000 MHz spectrum. It has the highest wide-band efficiency in its range of any antenna in its category today.
The GSA.8841 has been primarily designed for use with 4G LTE modules and devices that require the highest possible efficiency and peak gain to deliver best in class throughput on all major cellular 4G bands worldwide for telematics applications.
- High speed HD video
- Real-time streaming
- High capacity MIMO networks on public transportation
The GSA.8841 is backward compatible with 3G and 2G cellular applications such as HSPA, as well as covering WI-FI bands, and even has GPS/GALILEO included for E911 applications.
It is an ideal solution for any device requiring high, reliable performance. It will meet nearly all carrier certification requirements from an efficiency standpoint. The antenna also makes an excellent reference antenna for test purposes. It has been designed as an omni-directional antenna and the radiation patterns show this and are stable across all bands. Learn MoreRegular Price: $35.24
Special Price $33.13
-
Taoglas Dual-Band WiFi 2.4~2.5GHz/5.15~5.85GHz Terminal Mount Monopole Antenna - Range - UHF, SHF - 2.4 GHz to 2.5 GHz, 5.15 GHz to 5.85 GHz - 5.8 dBi - Wireless Data Network - Green - Whip - Omni-directional - RP-SMA Connector
The GW.05 dual band WiFi Hinged Rotatable Antenna is a high efficiency monopole antenna. Compared to other much larger antennas on the market, it has superior wide-band high efficiency characteristics. The bright green colour of the antenna adds a unique quality look and feel to any modern WiFi application point, device or router. It also provides differentiation if using Taoglas other similar looking antennas (such as the black color Taoglas TG.09 cellular antenna) on same device. The connector used is Rev SMA(M), the standard mating part for an antenna to most WiFi application points and routers in the market.
Learn More
The GW.05, as all monopole antennas, works best connected directly to the ground-plane of the device main PCB or to the outside of a metal housing. However it still has very good performance (>50%) even without connecting to a ground-plane, making it the best all round small WiFi terminal antenna on the market.
In the un-grounded installation condition it also comes below the max peak gain requirements for most WiFi modules which are usually 2dBi, so it can comply with FCC regulations.
The GW.05 is for Wi-Fi, WLAN, Zigbee, Bluetooth, and 802.11a/b/g/n/ac applications.
Many module manufacturers specify peak gain limits for any antennas that are to be connected to that module. Those peak gain limits are based on free-space conditions. In practice, the peak gain of an antenna tested in free-space can degrade by at least 1 or 2dBi when put inside a device. So ideally you should go for a slightly higher peak gain antenna than mentioned on the module specification to compensate for this effect, giving you better performance.
Upon testing of any of our antennas with your device and a selection of appropriate layout, integration technique, or cable, Taoglas can make sure any of our antennas' peak gain will be below the peak gain limits. Taoglas can then issue a specification and/or report for the selected antenna in your device that will clearly show it complying with the peak gain limits, so you can be assured you are meeting regulatory requirements for that module.
For example, a module manufacturer may state that the antenna must have less than 2dBi peak gain, but you don't need to select an embedded antenna that has a peak gain of less than 2dBi in free-space. This will give you a less optimized solution. It is better to go for a slightly higher free-space peak gain of 3dBi or more if available. Once that antenna gets integrated into your device, performance will degrade below this 2dBi peak gain due to the effects of GND plane, surrounding components, and device housing. If you want to be absolutely sure, contact Taoglas and we will test. Choosing a Taoglas antenna with a higher peak gain than what is specified by the module manufacturer and enlisting our help will ensure you are getting the best performance possible without exceeding the peak gain limits.
It is better not to select an embedded antenna with very low free-space peak gain (<2dBi) directly, as this antenna would have worse performance in your device, and lead to compromised performance compared to using a Taoglas antenna.
Also comes as a standard SMA(M) version.Regular Price: $12.77
Special Price $12.00
-
Taoglas 2.4/5.8GHz Black Terminal mount Monopole Antenna Hinged RP-SMA(M) - 2.4 GHz to 2.5 GHz, 5.15 GHz to 5.85 GHz - 2 dBi - Wireless Data Network, Wireless Router - Black - Omni-directional - RP-SMA Connector
The GW.05 dual band Wi-Fi Hinged Rotatable Antenna is a high efficiency monopole antenna with the capacity to cover Wi-Fi 6 frequencies up to 7.125GHz. Compared to other much larger antennas on the market, it has superior wide-band high efficiency characteristics. The bright green colour of the antenna adds a unique quality look and feel to any modern Wi-Fi application point, device or router. It also provides differentiation if using Taoglas other similar looking antennas (such as the black color Taoglas TG.09 cellular antenna) on same
device.The GW.05, as all monopole antennas, works best connected directly to the ground-plane of the device main PCB or to the outside of a metal housing. However, it still has very good performance (>50%) even without connecting to a ground-plane, making it the best all round small Wi-Fi terminal antenna on the market.
In the un-grounded installation condition, it also comes below the max peak gain requirements for most Wi-Fi modules which are usually 2dBi, so it can comply with FCC regulations. The GW.05 is for Wi-Fi, WLAN, Zigbee, Bluetooth, and 802.11a/b/g/n/ac applications.
Many module manufacturers specify peak gain limits for any antennas that are to be connected to that module. Those peak gain limits are based on free-space conditions. In practice, the peak gain of an antenna tested in free-space can degrade by at least 1 or 2dBi when put inside a device. So ideally you should go for a slightly higher peak gain antenna than mentioned on the module specification to compensate for this effect, giving you better performance.
Upon testing of any of our antennas with your device and a selection of appropriate layout, integration technique, or cable, Taoglas can make sure any of our antennas' peak gain will be below the peak gain limits.
Taoglas can then issue a specification and/or report for the selected antenna in your device that will clearly show it complying with the peak gain limits, so you can be assured you are meeting regulatory requirements for that module.
Learn MoreRegular Price: $14.84
Special Price $13.95
