Wireless Accessories

Mobile Mark's GPS Magnet Mount Antennas complements MobileMark's full range of GPS Mobile antennas with a convenient and portable mounting option. The magnet mount style allows the antennas to be moved from from car-to-car, and its small size makes it easy to transport.

The antenna design is very small, less than 2 inches (5 cm) overall,but still contains a small powerful magnet. The magnet can be attached to the roof, hood or trunk of any metal vehicle or flat surface. The cable would then be routed to the GPS receiver, typically through a vehicle window.

The antenna provides durability and weatherproofing, using a sealed polycarbonate case. When not in use, the antenna can easily be removed.

Although the antenna could be mounted on any surface, the antenna should ideally be placed on metal at least 5" (127 mm) across. This will provide the maximum GPS operation.

GPS performance is provided by a 26 dB low noise amplifier, with 5dBi of antenna gain. Power required for the GPS amplifier is either2.7 or 5 VDC. The power is supplied through the cable along with the GPS signal. Most GPS receivers will provide the needed power for the amplifier circuit without modifications.

The antenna is rated IPx5 for water ingress protection. The standard cable supplied with the Magnet Mount antenna is 10 feet (3 meters)of RG-174. Standard connector supplied is an SMA Plug (Male).

Different connectors can be supplied if requested, please consult your sales representative for availability.

Additional Mobile Mark GPS antennas include Surface Mount and Window Mount.

MultiBand antennas that combine GPS with other wireless applications are also available in a wide variety of mounting styles including additional Mag-mount options.

The MGW-303 features 3 elements in one antenna radome, measuring 4.2" D x 3.7" H (107 mm x 94 mm).

Two elements are typically used for WiFi MIMO (multiple-input-multiple-output). Other applications may devote one of the cables to WiFi leaving the additional antenna element available for other wireless applications such as Public Safety at 4.9 GHz, Military at 4.4 GHz or DSRC at 5.9 GHz.

This rugged antenna can be mounted to any vehicle, cargo container or trailer.

The antennas are available in either surface-mount or mag-mount models. The antennas can also be configured for combined GPS & Glonass use, specify a "G" after the prefix "MGW".

Mobile Mark's LTM502 Series Multiband Diversity/MIMO antenna
contains five separate antennas, all in one compact antenna housing:
two broadband LTE/Cellular antennas, two dual-band WiFi antennas,
and one GPS antenna. The LTM502 differs from the LTM501 in
that the broadband LTE/Cellular element covers all LTE frequencies
worldwide, from 694-3700 MHz.

Both WiFi and LTE MIMO (multiple-input-multiple-output) modems
offer greater speed and capacity than earlier generations of modems.
To ensure optimum performance, the systems need multiple antennas
on both the transmission and receive ends.

With 5-elements, the new LTM502 antenna is ideal for fleet management
systems that combine GPS with both any Global LTE MIMO
modem as well as WiFi MIMO modem.

Measuring 5.5" (140mm) in diameter with a low profile of 2.38" , the
LTM series antennas take up significantly less space than multiple
antennas and cut down on installation time and costs by offering a
single mounting hole. The antennas are available in either surfacemount
or mag-mount and can also be configured for combined GPS
& Glonass use.

The OD Series antennas provide omni-directional coverage for WiFi 2.4 GHz applications. Four models are available from 3-12 dBi gain.

These antennas are colinear arrays. Unique phasing cancels out-of- phase current distribution, improving performance. The OD Series are free space antennas; no ground plane is required.

Unique options for the OD series are add-on Reflector Kits that beam shape the omni pattern. Reflector options are available to provide cardioid shape in 90 o , 120 o & 180 o patterns. These can result in im - proved directional gain and isolation for reduced interference.

The antennas are durable and rugged. They can withstand the harsh - est environments of snow, wind, rain and ice.

The feed assembly is made of precision machined aluminum compo - nents and is irridited for weather protection. These antennas come with all the hardware needed to install it to a mast.

For ISM, Part 15 compliant connectors are available (reverse polar - ized), please consult your sales representative.

These antennas complement Mobile Mark's broad line of antenna products for Cellular applications.

The RM3 Dual Band is a medium profile (3" H, 76 mm) antenna with performance of 3 & 5 dBi max (frequency dependent). A ground plane is required to maximize gain. The antenna radome consists of black ASA UV resistant plastic, with a heavy duty metal base and threaded feed thru, or a direct N version is also available.

The bottom of the RM series is outfitted with a gasket for complete sealing. A mounting nut is provided. Magnetic mount versions, MGRM-900/1900 allow use without drilling a hole.

The RMM-UMB is a broadband version capable of simultaneous operation on worldwide bands from 750 MHz up to 2.7 GHz, with excellent response.

A direct N version is also available along with the standard surface mount.

Note: Groundplane required for optimal performance.