Wireless Accessories
-
Cisco Antenna - Cellular NetworkDipole - SMA Connector - TAA Compliant
Cisco Antenna - Cellular NetworkDipole - SMA Connector - TAA Compliant Learn MoreRegular Price: $83.16
Special Price $78.17
-
Cisco 3G/4G LTE and LTEA Omnidirectional Dipole Antenna (LTE-ANTM-D) - 698 MHz to 960 MHz, 1447 MHz to 1511 MHz, 1710 MHz to 2690 MHz - 3.7 dBi - Cellular Network, Indoor, Router, ModuleDipole - Omni-directional - TNC Connector
For optimal performance, we strongly recommend that you use two antennas to take full advantage of MIMO technology on all Cisco cellular routers that support MIMO (4G LTE and later releases).The LTE-ANTM-D omnidirectional dipole antenna is designed for indoor use with Cisco 4G Long Term Evolution (LTE) and Long Term Evolution Advanced (LTEA) Network Interface Modules (NIMs), 4G and 4G LTE Enhanced High-Speed WAN Interface Cards (EHWICs) as well as Cisco 4G and 3G Integrated Service Routers (ISRs).
The LTE-ANTM-D antenna is marked with a dual green band to indicate that it supports Cisco LTEA routers and modules.
This antenna has the following features:
- Support for frequencies of 698-960, 1448-1511, and 1710-2690 MHz.
- Standalone antenna peak gain of less than 3.7 dBi in the supported frequency bands.
- Articulating joint that can maneuver into three stop positions: 0°, 45°, and 90°.
- Male Threaded Neill-Concelman (TNC) connector that allows direct mounting of the antenna to any Cisco supported router with a female TNC connector.
For optimal performance, we strongly recommend that you use two antennas to take full advantage of MIMO technology on all Cisco cellular routers that support MIMO (4G LTE and later releases).
Learn MoreRegular Price: $83.16
Special Price $78.17
-
Cisco Multiband Integrated 2 - in - 1 Indoor Antenna - 700 MHz to 2600 MHz - Indoor, Cellular Network - White
Cisco Multiband Integrated 2 - in - 1 Indoor Antenna - 700 MHz to 2600 MHz - Indoor, Cellular Network - White Learn MoreRegular Price: $462.00
Special Price $434.28
-
Cisco 4G LTEA, 4G LTE, and 3G Omnidirectional Dipole Antenna (LTE-ANTM-SMA-D) - Range - UHF - 698 MHz to 960 MHz, 1447 MHz to 1511 MHz, 1710 MHz to 2690 MHz - 3.7 dBi - Wireless Router, ModuleDipole - Omni-directional - SMA Connector
The LTE-ANTM-SMA-D omnidirectional dipole antenna is designed for indoor use with Cisco 4G Long Term Evolution (LTE) and Long Term Evolution Advanced (LTEA) Service Routers (ISRs) and Pluggable Modules with an SMA connector.
The LTE-ANTM-SMA-D antenna is marked with a dual green band to indicate that it supports Cisco LTEA routers and modules.
This antenna has the following features:- Support for frequencies of 698-960, 1448-1511, and 1710-2690 MHz.
- Standalone antenna peak gain of less than 3.7 dBi in the supported frequency bands.
- Articulating joint that can maneuver into three stop positions: 0°, 45°, and 90°.
- Male SubMiniature A connector that allows direct mounting of the antenna to any Cisco supported router or Pluggable Module with an SMA connector.
- The SMA connector design has added rotational frictional torque to ensure the SMA interface stays properly mated, and to reduce chances of a disconnect. The design is also more finger friendly compared to a classic SMA hex nut design.
Learn More
For optimal performance, we strongly recommend that you use two antennas to take full advantage of MIMO technology on all Cisco cellular routers that support MIMO (4G LTE and later releases).Regular Price: $83.16
Special Price $78.17
-
Cisco 4G LTEA, 4G LTE, and 3G Omnidirectional Dipole Antenna (LTE-ANTM-SMA-D) - Range - UHF - 698 MHz to 960 MHz, 1447 MHz to 1511 MHz, 1710 MHz to 2690 MHz - 3.7 dBi - Wireless Router, ModuleDipole - Omni-directional - SMA Connector
The LTE-ANTM-SMA-D omnidirectional dipole antenna is designed for indoor use with Cisco 4G Long Term Evolution (LTE) and Long Term Evolution Advanced (LTEA) Service Routers (ISRs) and Pluggable Modules with an SMA connector.
The LTE-ANTM-SMA-D antenna is marked with a dual green band to indicate that it supports Cisco LTEA routers and modules.
This antenna has the following features:- Support for frequencies of 698-960, 1448-1511, and 1710-2690 MHz.
- Standalone antenna peak gain of less than 3.7 dBi in the supported frequency bands.
- Articulating joint that can maneuver into three stop positions: 0°, 45°, and 90°.
- Male SubMiniature A connector that allows direct mounting of the antenna to any Cisco supported router or Pluggable Module with an SMA connector.
- The SMA connector design has added rotational frictional torque to ensure the SMA interface stays properly mated, and to reduce chances of a disconnect. The design is also more finger friendly compared to a classic SMA hex nut design.
Learn More
For optimal performance, we strongly recommend that you use two antennas to take full advantage of MIMO technology on all Cisco cellular routers that support MIMO (4G LTE and later releases).Regular Price: $38.10
Special Price $35.81
-
Meraki Dual-band Omni Antennas - Range - UHF, SHF - 2.4 GHz to 2.5 GHz, 5.15 GHz to 5.875 GHz - 7 dBi - Wireless Data NetworkDirect Mount - Omni-directional - N-Type Connector
The Meraki MA-ANT-20 antenna is a multi-band, omni-directional antenna designed for use with Meraki APs that have N-type connectors. It is a versatile antenna and is suitable for a broad range of applications. The MA-ANT-20 is sold in sets of 2.
Learn MoreRegular Price: $161.18
Special Price $151.50