Cable Management

The cable management arm is compatible with most types of equipment. It is a fully adjustable, ruggedized solution. There are a number of ways to attach the cable management arm to different types of equipment. Some OEM cable management arms take up too much space in the rack. This cable management arm is very compact and will typically not have any type of obstruction issue caused by OEM cable management.

Don't leave your cables hanging

• Secure all types of cables
• Choose from 3 models for most applications
• Crossbars are designed for static mounted equipment

Cabling crossbars are used to secure cables for all types of equipment. They are typically used with equipment on static or non-sliding rails. If used with slide rails, cables need to be disconnected from the equipment before it is slid out. Cabling crossbars are available in several different types, depending on the amount of cabling to be secured. Heavy duty cabling crossbars are designed for UPSs that typically have large cables with no method to secure them. The smaller cable crossbars work well with 1U and 2U servers.

The cable management arm is compatible with most types of equipment. It is a fully adjustable, ruggedized solution. There are a number of ways to attach the cable management arm to different types of equipment. Some OEM cable management arms take up too much space in the rack. This cable management arm is very compact and will typically not have any type of obstruction issue caused by OEM cable management.

Designed for the RackSolutions Open Frame Rack Model 111, this Vertical Cable Management Bar is designed to handle large bundles of cables from the data center, networking, and telecommunications equipment mounted in a server rack. While the Rack Model 111 includes one 5 Inch Vertical Cable Management Bar, these are available in case you need a replacement or have additional cable management needs. The rack cable management bar comes integrated with cable passthrough holes routing cables from different directions. Cable tie-down slots are wide enough to allow for both zip ties and hook-and-loop Cinch Straps for securing cables as well as designed to hold up to 4 of our vertical rack PDUs with the help of a bracket (not included). There are a total of 8 mounting points within the Rack 111 for this vertical cable management bar, front/rear, right/left, and inside/outside. Because the Rack 111 is designed to be coupled together, each Vertical Cable Management Bar is shared with each adjacent rack. Both 5 Inch and 11 Inch depth options are available, depending on your cable density needs. Sizes include 24U through 70U for the 5 Inch depth cable management bars and 44U through 70U for the 11 Inch.