Rack & Cabling

The QuickNet™ SFQ Fiber Cassette is OM4 MPO to LC and supports 12 fibers total. It is optimized IL and uses universal polarity. The cassette has a black cover with a black MPO connector and 6 blue LC adapters with integral shutters to prevent contamination.

The FiberRunner® 1-Port Spillout is used to route cable into 1.5 inch (38mm) diameter split corrugated tubing directly through a hole cut in the side wall. It is compatible with the 4x4, 6x4, and 12x4 FiberRunner® Channel.

The FiberRunner® 1-Port Spillout is used to route cable into 1.5 inch (38mm) diameter split corrugated tubing directly through a hole cut in the side wall. It is compatible with the 4x4, 6x4, and 12x4 FiberRunner® Channel.

Used to support the 12x4 system attaching to any 3/8" (9.5mm) x 1 1/2" (38.1mm) or 3/8" (9.5mm) x 2" (50.8mm) ladder rack rail. Adjustable to nine incremental positions from 4" (101mm) to 12" (305mm) above or below the ladder rack. No threaded rod required. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16" nut driver on slide clamps.

Used to support the 12x4 system by spanning two threaded rod drops that are 24in apart. Ideal for supporting trapeze bracket from 24in wide ladder rack or 24in wide cable tray. Can be installed from above or below. Bracket is secured to each threaded rod with two nuts. The pre-assembled slide clamps enable fast assembly to channel. Use 7/16in nut driver on slide clamps, For 1/2in threaded rod.