Printing Kits

Return Program Fuser Maintenance Kit (Type 00) includes the fuser, transfer roller, pick roller and separation roller required for maintenance prompted by message 80 on your printer. Installing these replacement parts maintains the print quality and reliability of the printer. The 110/120-volt kit works in Lexmark MS810 Series, MS811 Series, MS812 Series, MX710 Series, MX810 Series, MX811 Series, MX812 Series, M5155, M5163, M5170, MX711, XM5163, XM5170, XM7170, XM7155 and XM7163. Lexmark Return Program fusers are patented devices subject to the restriction that the fuser may be used only once. Following the initial use, the customer agrees to return the fuser only to Lexmark for remanufacture and/or recycling. The Return Program fusers are designed to stop working once they reach their respective rated life.

The operator panel displays the message 80 "Replace maintenance kit" at required maintenance intervals. You must replace the fuser, transfer roller, pick roller, and separation roller at this interval to maintain the print quality and reliability of the printer.

Check the 2 digit type code on the fuser, or check Device Information using the embedded web server or the menus page for a replacement part number.

There are multiple warnings to indicate that the fuser is nearing end of life and that a maintenance kit is required, including error codes 80.0x, 80.1x, and 80.2x. If you receive error code 80.3x, the fuser has reached its rated life and the printer stops until a maintenance kit is installed. You must install the correct Fuser Maintenance Kit for the type of fuser that is installed in the printer.

This kit includes the Image Transfer Kit, pick rollers and separator rollers. The Image Transfer Kit contains a toner filter, ozone filter and a transfer roller. It is recommended that the kit be installed at 300,000 pages.