Finishers

Configure your Lexmark

Bins 1 and 2 support various plain, recycled or bond papers and glossy paper (16 to 68 lb., 60 to 256 gsm) in A3, A4, Executive, JIS-B4, JIS-B5, Letter, Legal and Ledger (Tabloid) sizes. The upper bin 1 supports up to 200 sheets of paper with hole punching. Bin 1 has a full sensor. The lower bin 2 supports up to 3200 sheets of paper with stapling, hole punching and offset stacking. Each stapled set may contain up to 50 sheets for 4-position stapling (5,000 staples capacity). Bin 2 has a full sensor. The standard output bin capacity is reduced to 100 sheets when using a floor standing finisher. The lower bin capacity is reduced when stapling is utilized. Hole punching and offset stacking are supported to Bin 2 only. The 2500-Sheet Tandem Tray or 2x 500-Sheet Tray is required to raise the printer or MFP to the correct height for use with the Finisher.

Configure your Lexmark

Bins 1 and 2 support various plain, recycled or bond papers and glossy paper (16 to 68 lb., 60 to 256 gsm) in A3, A4, Executive, JIS-B4, JIS-B5, Letter, Legal and Ledger (Tabloid) sizes. The upper bin 1 supports up to 200 sheets of paper with hole punching. Bin 1 has a full sensor. Bin 2 supports up to 2200 sheets of paper with stapling, hole punching and offset stacking. Each stapled set may contain up to 50 sheets for 4-position stapling (5,000 staples capacity). Supports Bin 2 has a full sensor. Bin 3, the lower bin, supports paper in A3, A4, JIS-B4, Letter, Legal, Ledger (Tabloid), Super Tabloid (12x18 inch) and SRA3 sizes. This bin, supports saddle stapling of up to 20 sets with up to 3 sheets of folded 20 lb. (75 gsm) paper per set. Or it supports up to 5 sets with up to 20 sheets per set. Bin 3 has a paper present sensor. The standard output bin capacity is reduced to 100 sheets when using a floor standing finisher. Bin 2 capacity is reduced when stapling is utilized. Hole punching and offset stacking are supported to Bin 2 only. The 2500-Sheet Tandem Tray or 2x 500-Sheet Tray is required to raise the printer or MFP to the correct height for use with the Finisher.

Configure your Lexmark

The Inline Stapler supports various plain, recycled or bond papers in A3, A4, Executive, JIS-B4, JIS-B5, Ledger, Legal and Letter sizes.Stapling of sets of up to 50 sheets of paper is supported with 2-position stapling (5,000 staples capacity) and offset stacking (15mm or 0.6").

This stapler offers single (long or short edge corner) and dual-position (long or short edge) stapling for up to 50 sheets of paper. The output bin supports up to 500 sheets of paper, and offers offset stacking to easily separate copies and/or print jobs.

Sensing

Sensors detect if the staple cartridge is present, low, or empty, and if the output bin is full.

Considerations

Cannot be used with either the 1250-Sheet Staple Hole Punch Finisher or 2250-Sheet Booklet Staple Hole Punch Finisher.

Location

The Inline Staple Finisher attaches to the output bin on top of the printer. The stapler allows for multi-position stapling in a compact footprint.

Media Support

Supports the same sizes, weights and types of media that the printer supports. Long edge for Letter and A4 only, and short edge for all other media.