Finishers

This floor-standing finisher can punch holes, staple, and make booklets. It also offers offset stacking to easily separate copies and/or print jobs. There are 4 output bins that support a total of up to 2,250 sheets of paper.

Hole punch and stapling

Choose between 2 holes or 3 holes. Staple up to 50 sheets of paper. Staple positions include single, double and diagonal. Saddle Stapled Booklets up to 20 sheets per set.

Output Bin Location

Output Bin 1 location is the top bin of the finisher. Output Bin 2 location is the Staple Tray on the finisher. Output Bin 3 location is Booklet Exit Bin on the finisher. Output Bin 4 location is the top of the Paper Transport Unit.

Media Support

Supports the same sizes, weights and types of media that the printer supports. However, not all functions are supported for all papers.

Sensing

Sensors detect if the staple cartridge is present, low or empty for the stapler and booklet maker. It detects the hole punch chad bin is full. The sensors detect whether the bin is full on the top of the 250-sheet standard bin, the 2,000-sheet high-capacity bin, and the booklet maker bin.

Output Bin Location

Output Bin 1 location is the top bin of the finisher. Output Bin 2 location is the Staple Tray on the finisher. Output Bin 3 location is Booklet Exit Bin on the finisher. Output Bin 4 location is the top of the Paper Transport Unit.

Choose between two holes or four holes. Staple up to 50 sheets of paper. Staple positions include single, double and diagonal. Saddle Stapled Booklets up to 20 sheets per set.

Sensors detect if the staple cartridge is present, low or empty for the stapler and booklet maker. It detects if the hole punch chad bin is full. The sensors detect whether the bin is full on the top of the 250-sheet standard bin, the 2,000-sheet high-capacity bin and the booklet maker bin.

Supports the same sizes, weights and types of media that the printer supports. However, not all functions are supported for all papers.

This feature offers support for offset stacking, allowing organized handling of printed materials as they come out of the printer. This unit supports up to 250 sheets of letter/A4 paper (20 lb., 75 gsm).

Considerations

Cannot be used with any other Output Option.

Media Support

Supports the same sizes, weights and types of media that the printer supports. However, not all functions are supported for all papers.

Sensing

The Offset Stacker supports bin 'full' sensing.

Configure your Lexmark

Bins 1 and 2 support various plain, recycled or bond papers and glossy paper (16 to 68 lb., 60 to 256 gsm) in A3, A4, Executive, JIS-B4, JIS-B5, Letter, Legal and Ledger (Tabloid) sizes. The upper bin 1 supports up to 200 sheets of paper with hole punching. Bin 1 has a full sensor. The lower bin 2 supports up to 3200 sheets of paper with stapling, hole punching and offset stacking. Each stapled set may contain up to 50 sheets for 4-position stapling (5,000 staples capacity). Supports Bin 2 has a full sensor. The standard output bin capacity is reduced to 100 sheets when using a floor standing finisher. The lower bin capacity is reduced when stapling is utilised. Hole punching and offset stacking are supported to Bin 2 only. The 2500-Sheet Tandem Tray or 2x 500-Sheet Tray is required to raise the printer or MFP to the correct height for use with the Finisher.

Configure your Lexmark

Bins 1 and 2 support various plain, recycled or bond papers and glossy paper (16 to 68 lb., 60 to 256 gsm) in A3, A4, Executive, JIS-B4, JIS-B5, Letter, Legal and Ledger (Tabloid) sizes. The upper bin 1 supports up to 200 sheets of paper with hole punching. Bin 1 has a full sensor. The lower bin 2 supports up to 3200 sheets of paper with stapling, hole punching and offset stacking. Each stapled set may contain up to 50 sheets for 4-position stapling (5,000 staples capacity). Bin 2 has a full sensor. The standard output bin capacity is reduced to 100 sheets when using a floor standing finisher. The lower bin capacity is reduced when stapling is utilized. Hole punching and offset stacking are supported to Bin 2 only. The 2500-Sheet Tandem Tray or 2x 500-Sheet Tray is required to raise the printer or MFP to the correct height for use with the Finisher.