Printer, Scanner & Fax/Copier

Output Bin Location

Output Bin 1 location is the top bin of the finisher. Output Bin 2 location is the Staple Tray on the finisher. Output Bin 3 location is Booklet Exit Bin on the finisher. Output Bin 4 location is the top of the Paper Transport Unit.

Choose between two holes or four holes. Staple up to 50 sheets of paper. Staple positions include single, double and diagonal. Saddle Stapled Booklets up to 20 sheets per set.

Sensors detect if the staple cartridge is present, low or empty for the stapler and booklet maker. It detects if the hole punch chad bin is full. The sensors detect whether the bin is full on the top of the 250-sheet standard bin, the 2,000-sheet high-capacity bin and the booklet maker bin.

Supports the same sizes, weights and types of media that the printer supports. However, not all functions are supported for all papers.

This feature offers support for offset stacking, allowing organized handling of printed materials as they come out of the printer. This unit supports up to 250 sheets of letter/A4 paper (20 lb., 75 gsm).

Considerations

Cannot be used with any other Output Option.

Media Support

Supports the same sizes, weights and types of media that the printer supports. However, not all functions are supported for all papers.

Sensing

The Offset Stacker supports bin 'full' sensing.

The Paper Transport Unit moves pages from the printer to either the 1250-Sheet Staple Hole Punch Finisher or the 2250-Sheet Booklet Staple Hole Punch Finisher.

Media Support

Supports the same sizes, weights and types of media that the printer supports.

Considerations

Can provide as an additional output destination tray for up to 250 sheets. Cannot be used with 500-Sheet Staple Finisher, Folding Paper Transport or Offset Stacker.

Location

The paper transport unit attaches to the output bin on top of the printer. It must be used with 1250-Sheet Staple Hole Punch Finisher or 2250-Sheet Booklet Staple Hole Punch Finisher.

Sensing

Bin full sensing is not supported.

This card enables printing of the Kyocera PRESCRIBE data stream on Lexmark network printers.

Replace a Kyocera PRESCRIBE printer

The printer with this card is designed to be a replacement for a Kyocera printer where the Kyocera PRESCRIBE printer language is used. Supports only black and white printing.

It is important that a thorough technical evaluation and certification test be conducted with each prospective customer to determine whether or not this feature is applicable.

Emulation support

Supports emulation of Kyocera Page Printers such as FS-600, FS-800, FS-1500, FS-1600, 1550, FS-1700, FS-1700+, FS-3700+, FS-6700 or FS-7000.

Evaluation and Test

Since Kyocera does not offer a single standard version of PRESCRIBE across all of its products, the emulation compatibility of this version is based upon testing with customer application test files in addition to an extensive set of engineering command-level tests.

Customise your Lexmark

Optimise your paper input.

Features

This unit supports A4, A5 (long edge fed), Folio, Letter, Legal and Oficio sizes. Paper (16 to 32 lb., 60 to 120 gsm) may be used from this tray.

Paper size, tray-present sensing and tray- low and tray-empty sensing are supported.