Connector Cables

Items 67 to 72 of 234 total

Set Descending Direction
per page

Grid  List 

  • Eaton Tripp Lite Series Cat6a 10G Snagless Shielded STP Ethernet Cable (RJ45 M/M), PoE, Blue, 10 ft. (3.05 m) - 10 ft Category 6a Network Cable for Network Device - First End: 1 x RJ-45 Network - Male - Second End: 1 x RJ-45 Network - Male - 10 Gbit/s - P

    Tripp Lite's N262-010-BL 10-ft. Blue Augmented Cat6 (Cat6a) Shielded (STP) Snagless patch cable allows 10Gbps data transmission over 4-pair copper. Each Cat6a cable is individually tested and certified on Fluke® test equipment, and the test results are available upon request. Snag-free strain relief boot provides the most secure and accurate connections.

    More from the Manufacturer

    Learn More
    $29.38

  • Eaton Tripp Lite Series Cat6a 10G Snagless Shielded Slim STP Ethernet Cable (RJ45 M/M), PoE, White, 10 ft. (3.1 m) - 10 ft Category 6a Network Cable for Network Device, Server, Switch, Router, Hub, Printer, Computer, Photocopier, Modem, PoE Device, Patch

    Cat6a Cable Ideal for Your High-Density 10 Gigabit Ethernet Network
    This Cat6a 10G Ethernet cable with RJ45 connectors is recommended for connecting network components like printers, computers, copiers, routers, servers, modems, hubs and switches in high-density data centers and network closets. Designed for fast transmission and excellent signal quality, the N262-S10-WH ensures peak performance throughout your LAN.

    Supports Power over Ethernet to Save You Money and Give You More Installation Choices
    Because this Cat6a cable supports PoE, it can supply the power to operate compatible PoE devices, such as security cameras, VoIP telephones, point-of-sale kiosks and access control devices. This saves you the expense and effort of purchasing, connecting and installing individual power supplies for each device. It also helps you install PoE devices in areas far away from AC outlets, such as poles or ceilings.

    Special Slim Design for Better Airflow and Easier Installation
    This Cat6a STP patch cord is more than 38% smaller in diameter than standard Cat6a cable. This increases airflow in tight spaces, which helps keep your equipment cool and properly functioning. It also cuts down on clutter in crowded racks and patch panels, and makes the cable easier to install around corners and through cable management panels.

    Premium Protection from EMI/RFI Line Noise Helps Your Equipment Perform Better
    The N262-S10-WH shields disruptive EMI (electromagnetic interference) and RFI (radio frequency interference) line noise that can disturb your electronics and inflict hardware damage or data loss. This EMI/RFI filtering also helps your connected components perform better and last longer.

    Snagless RJ45 Male Connectors Add Extra Protection
    The RJ45 connectors' snagless design protects the locking tabs from being damaged or broken off during installation. The ends are shielded to minimize near-end crosstalk (NEXT) levels.

    White Jacket Helps Avoid Misidentification That Can Cause Costly Downtime
    The cable has a white PVC jacket, which is easy to identify quickly in a crowded patch panel or switch and helps prevent the cable from becoming accidentally disconnected.

    Premium Construction for Superior Performance
    Manufactured from 28 AWG copper wire, the four-pair stranded cable is rated for speeds up to 10 Gbps. Integral strain relief gives the shielded cable extra flexibility, reduces stress and helps the cable move freely without cracking or breaking loose from the connector.

    Learn More
    $24.83

  • Eaton Tripp Lite Series Cat6a 10G Snagless Shielded STP Ethernet Cable (RJ45 M/M), PoE, Black, 10 ft. (3.05 m) - Category 6a for Network Device, Switch, Modem, Router, Hub, Patch Panel, VoIP Device, Camera - 1.25 GB/s - Patch Cable - 9.84 ft - 1 x RJ-45 M

    The N262-010-BK Cat6a 10G-Certified Snagless Shielded STP Network Patch Cable (RJ45 M/M) is recommended for transmitting 10 Gbps data, voice and video through high-speed 10G equipment, including network switches, modems, routers, adapters, hubs and patch panels. It also connects PoE devices, such as VoIP phones, security cameras and point-of-sale kiosks.

    Designed for fast transmission and excellent signal quality, this 10-foot black cable ensures peak performance throughout your local area network (LAN). It reduces impedance and structural return loss compared to standard 100 MHz wire. Premium shielding protects your Ethernet network from disruptive EMI/RFI line noise that can distort or destroy data.

    Manufactured from 26 AWG copper wire and protected by a rugged PVC jacket, the four-pair stranded N262-010-BK minimizes near-end crosstalk (NeXT) levels. The RJ45 connectors' snagless design protects the locking tabs from being damaged or broken off during installation. Integral strain relief with ridges on each end gives the cable extra flexibility, reduces stress, and helps the cable and connectors move freely without cracking.

    Each N262-010-BK cable has been tested and certified using Fluke® test equipment. The test results are available upon request. It supports IEEE 802.3af, is DTE power compliant, is ETL/UL certified, and is compatible with T568A/T568B wiring.

    Features

    Recommended for Making Cat6a 10G Ethernet Network Connections

    • Ideal for connecting network switches, modems, routers, adapters, hubs and patch panels in high-density data centers
    • Compatible with PoE devices, such as VoIP phones, security cameras and point-of-sale kiosks
    • Ensures peak performance throughout your LAN
    • Reduces impedance and structural return loss compared to standard 100 MHz wire

    Snagless RJ45 Male Connectors

    • Molded snagless boots prevent locking tabs from damage during installation
    • Integral strain relief protects cable and connectors from stress and cracking

    Premium Construction for Superior Performance

    • High-quality 26 AWG 4-pair stranded copper wire
    • Minimal near-end crosstalk ensures a strong signal
    • Rugged PVC jacket stands up to long-term use
    • EMI/RFI shielding protects network from disruptive line noise

    Tested and Certified Using Trusted Fluke Equipment

    • Supports IEEE 802.3af
    • DTE power compliant
    • ETL/UL certified
    • Compatible with T568A/T568B wiring
    • Test results available upon request

    More from the Manufacturer

    Learn More
    $29.38

  • Eaton Tripp Lite Series Cat6a 10G Snagless Shielded Slim STP Ethernet Cable (RJ45 M/M), PoE, Yellow, 10 ft. (3.1 m) - 10 ft Category 6a Network Cable for Network Device, Server, Switch, Router, Hub, Printer, Computer, Photocopier, Modem, PoE Device, Patch

    Cat6a Cable Ideal for Your High-Density 10 Gigabit Ethernet Network
    This Cat6a 10G Ethernet cable with RJ45 connectors is recommended for connecting network components like printers, computers, copiers, routers, servers, modems, hubs and switches in high-density data centers and network closets. Designed for fast transmission and excellent signal quality, the N262-S10-YW ensures peak performance throughout your LAN.

    Supports Power over Ethernet to Save You Money and Give You More Installation Choices
    Because this Cat6a cable supports PoE, it can supply the power to operate compatible PoE devices, such as security cameras, VoIP telephones, point-of-sale kiosks and access control devices. This saves you the expense and effort of purchasing, connecting and installing individual power supplies for each device. It also helps you install PoE devices in areas far away from AC outlets, such as poles or ceilings.

    Special Slim Design for Better Airflow and Easier Installation
    This Cat6a STP patch cord is more than 38% smaller in diameter than standard Cat6a cable. This increases airflow in tight spaces, which helps keep your equipment cool and properly functioning. It also cuts down on clutter in crowded racks and patch panels, and makes the cable easier to install around corners and through cable management panels.

    Premium Protection from EMI/RFI Line Noise Helps Your Equipment Perform Better
    The N262-S10-YW shields disruptive EMI (electromagnetic interference) and RFI (radio frequency interference) line noise that can disturb your electronics and inflict hardware damage or data loss. This EMI/RFI filtering also helps your connected components perform better and last longer.

    Snagless RJ45 Male Connectors Add Extra Protection
    The RJ45 connectors' snagless design protects the locking tabs from being damaged or broken off during installation. The ends are shielded to minimize near-end crosstalk (NEXT) levels.

    Yellow Jacket Helps Avoid Misidentification That Can Cause Costly Downtime
    The cable has a yellow PVC jacket, which is easy to identify quickly in a crowded patch panel or switch and helps prevent the cable from becoming accidentally disconnected.

    Premium Construction for Superior Performance
    Manufactured from 28 AWG copper wire, the four-pair stranded cable is rated for speeds up to 10 Gbps. Integral strain relief gives the shielded cable extra flexibility, reduces stress and helps the cable move freely without cracking or breaking loose from the connector.

    Learn More
    $24.83

  • Eaton Tripp Lite Series Cat6a 10G Snagless Shielded STP Ethernet Cable (RJ45 M/M), PoE, Blue, 20 ft. (6.09 m) - Category 6a for Network Device, Switch, Modem, Router, Hub, Patch Panel, VoIP Device, Camera - 1.25 GB/s - Patch Cable - 20 ft - 1 x RJ-45 Male

    The N262-020-BL Cat6a 10G-Certified Snagless Shielded STP Network Patch Cable (RJ45 M/M) is recommended for transmitting 10 Gbps data, voice and video through high-speed 10G equipment, including network switches, modems, routers, adapters, hubs and patch panels. It also connects PoE devices, such as VoIP phones, security cameras and point-of-sale kiosks.

    Designed for fast transmission and excellent signal quality, this 20-foot blue cable ensures peak performance throughout your local area network (LAN). It reduces impedance and structural return loss compared to standard 100 MHz wire. Premium shielding protects your Ethernet network from disruptive EMI/RFI line noise that can distort or destroy data.

    Manufactured from 26 AWG copper wire and protected by a rugged PVC jacket, the four-pair stranded N262-020-BL minimizes near-end crosstalk (NeXT) levels. The RJ45 connectors' snagless design protects the locking tabs from being damaged or broken off during installation. Integral strain relief with ridges on each end gives the cable extra flexibility, reduces stress, and helps the cable and connectors move freely without cracking.

    Each N262-020-BL cable has been tested and certified using Fluke® test equipment. The test results are available upon request. It supports IEEE 802.3af, is DTE power compliant, is ETL/UL certified, and is compatible with T568A/T568B wiring.

    Features

    Recommended for Making Cat6a 10G Ethernet Network Connections

    • Ideal for connecting network switches, modems, routers, adapters, hubs and patch panels in high-density data centers
    • Compatible with PoE devices, such as VoIP phones, security cameras and point-of-sale kiosks
    • Ensures peak performance throughout your LAN
    • Reduces impedance and structural return loss compared to standard 100 MHz wire

    Snagless RJ45 Male Connectors

    • Molded snagless boots prevent locking tabs from damage during installation
    • Integral strain relief protects cable and connectors from stress and cracking

    Premium Construction for Superior Performance

    • High-quality 26 AWG 4-pair stranded copper wire
    • Minimal near-end crosstalk ensures a strong signal
    • Rugged PVC jacket stands up to long-term use
    • EMI/RFI shielding protects network from disruptive line noise

    Tested and Certified Using Trusted Fluke Equipment

    • Supports IEEE 802.3af
    • DTE power compliant
    • ETL/UL certified
    • Compatible with T568A/T568B wiring
    • Test results available upon request

    More from the Manufacturer

    Learn More
    $51.73

  • Eaton Tripp Lite Series Duplex Singlemode 9/125 Fiber Patch Cable (LC/LC), 2M (6 ft.) - LC Male - LC Male - 6.56ft

    Tripp Lite's 2-meter, single mode duplex fiber optic LC/LC patch cable is manufactured from 9/125 zipcord fiber. The cable has LC connectors on one end, LC connectors on the other, a PVC jacket, and is FDDI and OFNR rated. Duplex single mode fiber is most commonly used in LAN applications. Tripp Lite warrants this product to be free from defects in materials and workmanship for life.

    More from the Manufacturer

    Learn More
    $25.70

Items 67 to 72 of 234 total

Set Descending Direction
per page

Grid  List