Cable Extenders

Tested to work with the entire line of Mimo Monitors USB displays, The Mimo USB Port Extender 102 is a two port USB 2.0 high speed extension solution, enabling USB 2.0 connections at up to 480Mbps over 100m/330ft of Cat 5e cabling. Most importantly, The Mimo USB Extender Adapter 102 delivers the standard 500mA USB power over the Cat 5e extension link to the two-port remote hub, eliminating the need to locate the remote USB devices near an AC power outlet and greatly increasing the ease of deployment for USB extension in industrial, medical, commercial and other applications.

The Mimo USB port extender does not require special software drivers. To the OS, it installs and operates as a USB hub. A true plug-and-play solution, the Mimo USB Extender 102 is compatible with all leading operating systems. In addition to supporting our line of displays, the Mimo USB Extender 102 supports all other USB 1.1 and 2.0 devices and protocols - Control, Interrupt, Bulk and Isochronous - making it is ideal for high-speed web cams, hard drives, printers, scanners, audio devices, digital cameras and game controllers.

System delivers power to remote hub over Cat 5 extension link simplifying installation and eliminating the need for AC power close to the remote unit.

• Remote unit provides standard 500mA to each USB port, eliminating need for AC power at the remote location.
• Ideal for use with Mimo Monitors, where remote power is not available. Will also work with all other USB devices.
• Operates with USB 2.0 high-speed host controllers and USB 1.1 classic hosts.
• Extends USB 2.0 high-speed and USB 1.1 (low-speed, full speed) devices up to 100m over Cat 5e cable.
• Supports all USB device types: Control, Interrupt, Bulk and Isochronous at up to 480Mbps.
• True plug and play, ready to operate right out of the box. No new driver installation required.
• Supports all major operating systems including Windows, Mac OS®, and Linux®
• Integrated hub provides two USB 2.0 ports. Number of devices can be increased using additional USB hubs.

The ComNet CopperLine Ethernet-over-coax minis are an ultra-small form factor addition to the ComNet CopperLine product family. These miniature remote units provide 10/100 Mbps Ethernet data over extended distance coaxial cable, up to 1,200 feet (400 meters). The mini CopperLine units will allow extended distance over copper to be used in standard applications where space is extremely limited. A DIP Switch allows configurable selection of 10 Mbps or 100 Mbps speed these units are simple to install. This CopperLine Value kit provides two units with power supplies.

The ComNet™ Value CLEK41EOC features four remote 10/100 Mbps singlechannel units and a single four-channel local unit in a pre-packaged kit. Perfect for applications that face density challenges. The four-channel units will fit into any ComNet product rack. The four individual small-sized remote units can be placed up to 1,200 feet (400 meters) from the four channel local unit. Power supplies included. A DIP Switch allows configurable selection of 10 Mbps or 100 Mbps speed these units are simple to install. This CopperLine® Value kit provides five units with power supplies.

The ComNet CopperLine® Ethernet over copper line supports up to sixteen channels of 10/100Mbps Ethernet with Pass-through PoE over twisted pair cable (CAT-5, UTP), or over coaxial cable. The single channel units may be powered by a PoE switch or the included power supply. Four, eight, and sixteen channel units operate from local power. These units provide the ultimate flexibility for extending a powered device (PD) over long distance copper. DIP switches are provided for user-selection of local or remote, 10 or 100Mbps, and 1 pair or 4 pair (UTP) settings.

The ComNet CopperLine® Ethernet over copper line supports up to sixteen channels of 10/100Mbps Ethernet with Pass-through PoE over twisted pair cable (CAT-5, UTP), or over coaxial cable. The single channel units may be powered by a PoE switch or the included power supply. Four, eight, and sixteen channel units operate from local power. These units provide the ultimate flexibility for extending a powered device (PD) over long distance copper. DIP switches are provided for user-selection of local or remote, 10 or 100Mbps, and 1 pair or 4 pair (UTP) settings.

Features for | The Official Website For ComNet Products & Support

• Full 10/100 Mbps Bandwidth
• Supports Multicast, Unicast and Jumbo Frame
• Symmetric Bandwidth provides consistent upload and download with virtually zero packet loss over the total usable distance
• User-selectable data rate for maximum bandwidth and transmission distance utilization.
• Complies with all major IEEE standards and RFC network protocols for UDP, TCP/IP, HTTP/HTTPs
• Designed and manufactured in the USA
• Transmits individual Ethernet data channels with Passthrough PoE over standard UTP or Coaxial cable
• Extends Ethernet up to 3,000 feet (914 m) at 10 Mbps or 2,000 feet (610 m) at 100 Mbps over UTP cable
• Extends Ethernet up to 5,000 feet (1,524 m) at 10 Mbps or 2,000 feet (610m) at 100 Mbps over Coaxial cable
• Extended Pass-through PoE meets the IEEE 802.3af standard for Power over Ethernet
• Type tested to RFC-2544 TCP/IP network bandwidth packet transmission standards
• ComFit standard form factor is interchangeable between stand-alone or rack mount use.
• Designed to meet full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions, and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.
• Electric Port Supports Auto-negotiation for Full Duplex or Half Duplex Data Throughput

Applications

• Retrofit existing analog CCTV installations to Ethernet-based systems
• CCTV systems for casinos, airports, school campuses