Cable Extenders Hardware Connectivity Accessories

Veracity Gigabit Ethernet Extender - Network (RJ-45) - 656.17 ft Extended Range

Regular Price: $218.79

Special Price $205.66

Gigabit Ethernet is commonly used for Local Area Network (LAN) installations, although 100Base-TX is often used for single IP camera connections. As IP devices become more diverse, many applications demand network connections that exceed the maximum 100 metres (328 feet) distance limit for cabled Ethernet.

OUTREACH Lite G provides an instant solution to this restriction for gigabit Ethernet connections (a 100Base-TX only version of OUTREACH Lite is also available - see table on next page).

Simply connect an OUTREACH Lite G in the middle of a network cable run to double the available range to 200 metres (656 feet).

Simple installation
OUTREACH Lite G takes advantage of the universal 802.3af/at/bt POE standards, so it can draw its own power from the network connection. No local power is required, therefore OUTREACH Lite G can be located exactly where it is needed.

If your network switch has POE, simply connect OUTREACH Lite G up to 100 metres from the switch, and it will deliver another 100 metres reach over regular Cat5e or similar cable (Diagram 1). If POE is not available, the link can easily be upgraded using a low-cost POE injector such as Veracity's gigabit compatible OUTSOURCE (Diagram 2).

No set-up or network configuration is required, as OUTREACH Lite G automatically sets up network speed, duplex and crossover on connection, and does not require an IP or MAC address.

Go further
If POE and network extension beyond 200 metres (656 feet) is required, Veracity's OUTREACH Max G may be installed to extend Ethernet and POE to OUTREACH Lite G For example, a 300 metre (984 feet) connection between a POE switch and another network device can be achieved by fitting an OUTREACH Max G at 100 metres along the cable, followed by 100m then an OUTREACH Lite G, and up to 100m to the gigabit network device.

For longer Ethernet runs, Veracity recommends LONGSPAN long distance point-to-point devices, which can achieve 100Base-TX connections with POE at up to 820m (2,690ft).

No restrictions
Because OUTREACH Max G and OUTREACH Lite G simply restore the network connection every 100 metres, the full bandwidth of gigabit Ethernet is maintained across the entire link. This maximises performance and transparency, with no risk of a reduced or unpredictable bandwidth, even at distances of several hundred metres or more.

Learn More

| Add to Compare

Veracity Outdoor Gigabit Ethernet Extender - 2 x Network (RJ-45) - 656 ft Extended Range

Regular Price: $292.24

Special Price $267.43

OUTREACH Lite G delivers gigabit Ethernet at twice the normal distance

Simply connect an OUTREACH Lite G in line with the network cable and instantly double network range to 200 metres (656 ft).

Gigabit Ethernet is commonly used for Local Area Network (LAN) installations, although 100Base-TX is often used for single IP camera connections. As IP devices become more diverse, many applications demand network connections that exceed the maximum 100 metres (328 feet) distance limit for cabled Ethernet. OUTREACH Lite G provides an instant solution to this restriction for gigabit Ethernet connections (a 100Base-TX only version of OUTREACH Lite is also available - see table on next page). Simply connect an OUTREACH Lite G in the middle of a network cable run to double the available range to 200 metres (656 feet).

Simple installation
OUTREACH Lite G takes advantage of the universal 802.3af/at/bt POE standards, so it can draw its own power from the network connection. No local power is required, therefore OUTREACH Lite G can be located exactly where it is needed.

If your network switch has POE, simply connect OUTREACH Lite G up to 100 metres from the switch, and it will deliver another 100 metres reach over regular Cat5e or similar cable (Diagram 1). If POE is not available, the link can easily be upgraded using a low-cost POE injector such as Veracity's gigabit compatible OUTSOURCE.

No set-up or network configuration is required, as OUTREACH Lite G automatically sets up network speed, duplex and crossover on connection, and does not require an IP or MAC address.

Go further
If POE and network extension beyond 200 metres (656 feet) is required, Veracity's OUTREACH Max G may be installed to extend Ethernet and POE to OUTREACH Lite G.

For example, a 300 metre (984 feet) connection between a POE switch and another network device can be achieved by fitting an OUTREACH Max G at 100 metres along the cable, followed by 100m then an OUTREACH Lite G, and up to 100m to the gigabit network device. For longer Ethernet runs, Veracity recommends LONGSPAN long distance point-to-point devices, which can achieve 100Base-TX connections with POE at up to 820m (2,690ft).

No restrictions
Because OUTREACH Max G and OUTREACH Lite G simply restore the network connection every 100 metres, the full bandwidth of gigabit Ethernet is maintained across the entire link. This maximises performance and transparency, with no risk of a reduced or unpredictable bandwidth, even at distances of several hundred metres or more.

Learn More

| Add to Compare

Hanwha Techwin TEC-F16 16 Channel Ethernet over UTP Extender With Pass-Through PoE - 16 x Network (RJ-45)

Regular Price: $4,105.83

Special Price $3,086.36

The TEC-F16 is a 16 channel, 1U rack-mounted Ethernet. over Coax extender. The Ethernet over copper TEC-F16 supports 16 channels of 10/100Mbps Ethernet with Pass-through PoE over coaxial cable. The unit is powered by local power and operates as the locally positioned device. These units provide the ultimate flexibility for extending a powered device (PD) over long distance copper. DIP switches are provided for user-selection of 10/100Mbps setting.

Learn More

| Add to Compare

Hanwha Techwin TEU-F01 1 Channel Ethernet over UTP Extender With Pass-Through PoE - 1 x Network (RJ-45)

Regular Price: $397.88

Special Price $324.94

The TEU-F01 is a 1 channel Ethernet over Twisted Pair extender. The Ethernet over copper TEU-F01 supports 1 channel of 10/100Mbps Ethernet with Pass-through PoE over UTP cable. This single channel unit may be powered by a PoE switch or the included power supply. These units provide the ultimate flexibility for extending a powered device (PD) over long distance copper. DIP switches are provided for user-selection of local or remote and 10/100Mbps setting. The TEU-F01 units are standalone, or may be DIN-rail mounted by the addition of model SBP-UDR adaptor.

Learn More

| Add to Compare

Wisenet 4 Channel Ethernet over UTP Extender With Pass-Through PoE - 4 x Network (RJ-45) - 5000 ft Extended Range

Regular Price: $1,439.16

Special Price $1,146.99

The TEU-F04 is a 4 channel Ethernet over Twisted Paid extender. The Ethernet over copper TEU-F04 supports 4 channels of 10/100Mbps Ethernet with Pass-through PoE over UTP cable. This 4-channel unit may be powered by local power. These units provide the ultimate flexibility for extending a powered device (PD) over long distance copper. DIP switches are provided for user-selection of local or remote and 10/100Mbps setting. The TEU-F04 units are interchangeable between stand-alone or card mount configurations, or may be DIN-rail mounted by the addition of model SBP-UDR.

Learn More

| Add to Compare

Hanwha Techwin TEU-F16 16 Channel Ethernet over UTP Extender With Pass-Through PoE - 16 x Network (RJ-45)

Regular Price: $4,148.15

Special Price $3,118.18

The TEU-F16 is a 16 channel, 1U rack-mounted Ethernet. over Twisted Paid extender. The Ethernet over copper TEU-F16 supports 16 channels of 10/100Mbps Ethernet with Pass-through PoE over UTP cable. The unit is powered by local power and operates as the locally positioned device. These units provide the ultimate flexibility for extending a powered device (PD) over long distance copper. DIP switches are provided for user-selection of 10/100Mbps setting.

Learn More

| Add to Compare

VDO360 Springline USB Extender - USB

Regular Price: $294.59

Special Price $276.91

VDO360 Springline USB Extender - USB Learn More

| Add to Compare

VDO360 Springline USB Extender - Network (RJ-45)USB

Regular Price: $209.84

Special Price $194.06

The VUSBEXT-U is an economical but high performance USB extender, compliant with USB 2.0 specifications. Extend USB PTZ HD Cameras from the Host (PC) up to 50m (164 ft) using twisted pair cable.

Learn More

| Add to Compare

Hall Research USB 2.0 on Cat6 Extender Kit with Hub - Network (RJ-45)USB - 164.04 ft Extended Range

Regular Price: $147.43

Special Price $138.58

The U2-160-4 is a USB 2.0 extender with built-in 4-Port Hub in the remote end for connection of up to 4 USB devices. The extender sends USB signals across a CAT5e/6 cable up to 50 meters at data rates to 480 Mbps. In most applications no additional power supply connection is needed as power is drawn from the host and sent through the CAT5e/6 cable. A universal power supply is included for use with power hungry USB devices.

Learn More

| Add to Compare

Hall Research USB 2.0 over UTP Extender with 2-Port Hub - 2 x Network (RJ-45) - 3 x USB - 164.04 ft Extended Range

Regular Price: $130.57

Special Price $122.74

The U22-160 extends your host PC's USB 2.0 port across a single Cat5e/6 cable to 50 meters (165 ft) with data rates up to 480 Mb/s.

In most instances, no power supply is needed for either side as the local (host) side gets its power from the PC and it sends PoC (Power-over-Cable) to the remote (device) side. However for convenience a power supply is included that can be plugged in to the remote end for power hungry USB devices. The remote end has a two port hub built-in to allow connection of 2 USB Devices. The U22-160 is a perfect solution for industrial and commercial applications.

This product can be used to extend a broad range of USB devices like webcams, printers, keyboards, and disk drives up to 165 ft (50 m) using single Cat 5/6 cable.

Learn More

| Add to Compare