Hardware Connectivity

4-to-1 Round Harness Cable Assemblies are pre-terminated 8-fiber cable assemblies that allow for standards-compliant migration from duplex based applications (e.g. 10G Ethernet) to parallel optics based applications (e.g. 40/100G Ethernet). As well as to connect to a SAN switch or storage array at 8/16/32G speeds. All cable assemblies are factory terminated and tested to deliver verified optical performance and reliability for improved network integrity.

4-to-1 Breakout Cable Harness Assemblies are pre-terminated 8-fiber cable assemblies that allow for standards-compliant migration that convert a single lane of parallel optic signals (i.e. 40GBASE-SR4, 100GBASE-SR4, 200GBASE-SR4) into (4) discrete duplex LC channels. For example, a single MPO connector running 100GBASE-SR4 is broken out to 4 lanes of 25GBASE-SR on duplex LCs. All cable assemblies are factory terminated and tested to deliver verified optical performance and reliability for improved network integrity

The fusion splice LC Fiber Optic Connector is a multimode 50/125µm OM3/OM4/OM5 fiber connector, intended for 900-micron tight-buffered or 250um loose-tube fiber installation. Field termination can be done in about two minutes using common fusion splice machines (not sold by Panduit). The pre-polished fiber endface eliminates time-consuming field polishing, reducing installation costs. The LC connector has an aqua- and grey-colored front assembly and rear assembly/boot.

The Fusion Splice LC-UPC Fiber Optic Connector is a singlemode 9/125µm OS1/OS2 simplex fiber connector, intended for 900µm tight-buffered or 250µm loose-tube fiber installation. Field termination can be done in about two minutes on several common splice machine brands. The connector consists of a ferrule assembly with a bare fiber stub, a front housing, a rear housing with integral boot, and a splice protection sleeve.

LC small form factor (SFF) field polish connectors with rear pivot latch shall be TIA/EIA-604 FOCIS-10 compatible. LC simplex and duplex connectors shall be field terminable. The fibers shall terminate in 1.25mm ceramic ferrules with non-optical disconnect functionality and an average insertion loss of 0.1dB per mated pair for multimode and singlemode fiber.