Cleaning Pads

Eraser Burnish Pad 3600 is a floor maintenance burnishing pad made of high-quality synthetic fibers in a nonwoven web construction. The fibers are bonded to the web structure with a durable resin system that permeates the entire pad. Unique design and durable construction make these pads the industry standard for consistent performance and long life. Pad is reversible and will not be significantly affected by water, detergents, or cleaners normally used for floor maintenance. It is designed for burnishing finish-coated flooring such as sheet vinyl, vinyl tile, marble, terrazzo or concrete. Use on ultra high-speed floor machines operating at 1500 to 3000 rpm.

More from the Manufacturer

Niagara White Polishing Pads are designed for buffing very soft finishes or for polishing soft waxes on wood floors. It can also be used for light cleaning to help remove soil and scuffs marks with minimal dulling of finish. Use with rotary or automatic equipment for spray cleaning or dry buffing with low speeds from 175 to 600 RPM.

Niagara Red Buffing Pad 5100N cleans when wet and buffs when dry like two pads in one. This pad will clean and remove scuff marks while polishing floors to a high gloss. Use for daily cleaning with a rotary floor cleaner at conventional speeds from 175 to 600 RPM.

Floor Cleaner Pad is designed for wet scrubbing or medium-duty spray cleaning. Open-web design allows dirt to enter the pad and resist load for maximum cleaning performance. Resiliency allows pad to remain flexible to reach depressions. Floor pad is designed for use on automatic scrubber and single-disc floor machines at speeds from 350 to 800 RPM.

Heavy-duty floor stripping pad works with your stripping solution and floor machine agitation to remove all finish from floors. Open-web design allows dirt to enter the fiber and resist soil load on the face of the pad for maximum use. Resiliency allows pad to remain flexible to reach depressions. Heavier denier fibers mean longer-lasting pads. Harder resin is abrasive for aggressive stripping action. Floor pad is designed for use at speeds between 175 to 350 RPM in rotary/automatic scrubbers.