Accessories
-
Supermicro 75cm OCuLink to PCIE U.2 with Power Cable - 2.46 ft OCuLink/U.2 Data Transfer/Power Cable for Server - First End: 1 x U.2 (SFF-8639), 1 x 4-pin Power - Second End: 1 x SFF-8611 - 34 AWG
The Supermicro CBL-SAST-1011 enables OCuLink (x4) to U.2 with power cable connections for storage. This cable is compliant with T10 and SFF standard and is verified with Supermicro servers, AOC cards, and storage. Each Supermicro cable is validated to ensure quality and performance.
Learn MoreRegular Price: $32.39
Special Price $28.06
-
Supermicro 30cm OCuLink 8 Lanes to 2x OCuLink 4 Lanes Pascal Cable - 11.81" OCuLink Data Transfer Cable for Server - First End: 2 x SFF-8611 - Male - Second End: 1 x SFF-8611 OCuLink - Male
The Supermicro CBL-SAST-1021 enables OCuLink (x8) to 2 OCuLink (x4) connection This cable is compliant with T10 and SFF standard and is verified with Supermicro servers, AOC cards, and storage. Each Supermicro cable is validated to ensure quality and performance.
Learn MoreRegular Price: $52.13
Special Price $49.00
-
Supermicro MiniSAS HD Connector for PCI-E x16 - 3.28 ft Mini-SAS HD Data Transfer Cable for Mini PCI Express Card - First End: Mini-SAS HD - 12 Gbit/s - 30 AWG
While the number of hosts can vary based on the configuration, in every configuration the cables between the JBOF and the hosts are usually connected from Port A (JBOF) to Port A (Host) and from Port B (JBOF) to Port B (Host). Looking at the L bracket from the outside, there is a clear marking on the end where Cable A should go (and Cable B goes in to the other port). If two cables are plugged into the AOC, then all x16 lanes will be used. If only Cable A is connected, then it's limited to x8. The table below lists supported cables.
Learn MoreRegular Price: $122.65
Special Price $115.29
-
Supermicro MiniSAS HD Connector for x16 PCI-E - 6.56 ft Mini-SAS HD Data Transfer Cable for Mini PCI Express Card - First End: 8 x Mini-SAS HD - 12 Gbit/s - 30 AWG
While the number of hosts can vary based on the configuration, in every configuration the cables between the JBOF and the hosts are usually connected from Port A (JBOF) to Port A (Host) and from Port B (JBOF) to Port B (Host). Looking at the L bracket from the outside, there is a clear marking on the end where Cable A should go (and Cable B goes in to the other port).
Learn More
If two cables are plugged into the AOC, then all x16 lanes will be used. If only Cable A is connected, then it's limited to x8. The table below lists supported cables.Regular Price: $179.43
Special Price $168.66
-
Supermicro MiniSAS HD Connector for PCI-E x16 - 9.84 ft Mini-SAS HD Data Transfer Cable for Add-on Card - First End: Mini-SAS HD
While the number of hosts can vary based on the configuration, in every configuration the cables between the JBOF and the hosts are usually connected from Port A (JBOF) to Port A (Host) and from Port B (JBOF) to Port B (Host). Looking at the L bracket from the outside, there is a clear marking on the end where Cable A should go (and Cable B goes in to the other port).
Learn More
If two cables are plugged into the AOC, then all x16 lanes will be used. If only Cable A is connected, then it's limited to x8. The table below lists supported cables.Regular Price: $198.53
Special Price $186.62
-
Supermicro 10G SFP+ Active Optical Fiber 850nm Pull Type 10m Cable - 32.81 ft Fiber Optic Network Cable for Server, Switch, Expansion Card, Add-on Card, Network Device - First End: 1 x SFP+ Network - Second End: 1 x SFP+ Network - 10 Gbit/s
The Supermicro CBL-SFP+AOC-10M enables SFP+ 10G high speed fiber connections for servers, adapter cards, and switches. This cable is compliant with IEEE and SFF standard and is verified with Supermicro servers, AOC cards, and switches. This cable is also available in 1m, 3m, and 5m cable length. Each Supermicro cable is validated to ensure quality and performance.
Learn MoreRegular Price: $150.56
Special Price $141.53
