Accessories

Designed for the RackSolutions Open Frame Rack Model 111, this Vertical Cable Management Bar is designed to handle large bundles of cables from the data center, networking, and telecommunications equipment mounted in a server rack. While the Rack Model 111 includes one 5 Inch Vertical Cable Management Bar, these are available in case you need a replacement or have additional cable management needs. The rack cable management bar comes integrated with cable passthrough holes routing cables from different directions. Cable tie-down slots are wide enough to allow for both zip ties and hook-and-loop Cinch Straps for securing cables as well as designed to hold up to 4 of our vertical rack PDUs with the help of a bracket (not included). There are a total of 8 mounting points within the Rack 111 for this vertical cable management bar, front/rear, right/left, and inside/outside. Because the Rack 111 is designed to be coupled together, each Vertical Cable Management Bar is shared with each adjacent rack. Both 5 Inch and 11 Inch depth options are available, depending on your cable density needs. Sizes include 24U through 70U for the 5 Inch depth cable management bars and 44U through 70U for the 11 Inch.

Designed for the RackSolutions Open Frame Rack Model 111, this Vertical Cable Management Bar is designed to handle large bundles of cables from the data center, networking, and telecommunications equipment mounted in a server rack. While the Rack Model 111 includes one 5 Inch Vertical Cable Management Bar, these are available in case you need a replacement or have additional cable management needs. The rack cable management bar comes integrated with cable passthrough holes routing cables from different directions. Cable tie-down slots are wide enough to allow for both zip ties and hook-and-loop Cinch Straps for securing cables as well as designed to hold up to 4 of our vertical rack PDUs with the help of a bracket (not included). There are a total of 8 mounting points within the Rack 111 for this vertical cable management bar, front/rear, right/left, and inside/outside. Because the Rack 111 is designed to be coupled together, each Vertical Cable Management Bar is shared with each adjacent rack. Both 5 Inch and 11 Inch depth options are available, depending on your cable density needs. Sizes include 24U through 70U for the 5 Inch depth cable management bars and 44U through 70U for the 11 Inch.

The RackSolutions Server Rack Cabinets are compatible with Dell, HP and IBM servers and have a footprint that is the same size as a European data center tile (600 mm). The 800 mm wide rack is also available for a network cabinet. Our cabinets are the EIA standard 19" server rack. The sizes are available in 24U, 42u and 48U to get the most height out of your data center space. All of these rack options come standard with 2 vertical cable management bars that are the same height of the rack.

The RackSolutions Server Rack Cabinets are compatible with Dell, HP and IBM servers and have a footprint that is the same size as a European data center tile (600 mm). The 800 mm wide rack is also available for a network cabinet. Our cabinets are the EIA standard 19" server rack. The sizes are available in 24U, 42u and 48U to get the most height out of your data center space. All of these rack options come standard with 2 vertical cable management bars that are the same height of the rack.

Rack rails can be installed into racks with square, round or threaded holes. Rack mount equipment weighing up to 200 lbs (91 kgs) can be installed using rack rails. The rack rail can be installed into server racks with installation depths from 10" - 24" (254 - 609.6 mm). Adjustable Rack Rails and Square Hole Mounting The rail kit depth is fully adjustable from 10"-31.75" (254mm-806mm) all by loosening the screws and nuts. The rail kit is made from 18 GA steel and is zinc plated. The RackSolutions Universal rail kits are square hole to allow for the rails to be compatible with round, square or threaded hole racks. The rails to be compatible with round, square or threaded hole racks.