Accessories

Tool-less rack rails can be installed into racks with square holes. Rackmount equipment weighing up to 200 lbs (90.7 kgs) can be installed using a tool-less rack rail. The rack rail is 27.87" (708 mm) deep and can be installed into server racks with installation depths from 28 - 30" (711 - 762 mm) and supports equipment up to 35" (889 mm). The tool-less rack rail is primarily for 4Post racks, but it can be installed in other 2Post configurations as well with the addition of 2Post conversion kits. Center mount installations require 2POST-2UKIT and flush mount installations require 4UKIT-003

Our Wall Mount Rack allows you to mount your server in 1U-2U of space horizontally or vertically. 19" rack mount equipment can be mounted to a wall, under a desk, or stacked on a table. The rack supports up to 30" equipment, slide rails, cable management, and is compatible with most OEM slide rails including Dell, HP, IBM, Apple, Sun, Intel, Cisco, Juniper and 3Com. The included cover* protects the unit while still allowing proper ventilation. Airspace openings above and below the server and louvers on each side maintain airflow and cooling. The rack features an adjustable front based on needs.** The wall mount rack made from aluminum, and cover constructed from 18A steel, both with a black powder coat finish, ensure the safety and stability of your network equipment. All hardware is included, but extra brackets are available for purchase for additional mounting options. Compatible with round hole, threaded hole, and square hole equipment and slides. *The cover does not secure the front or back or the rack **The rear is not adjustable

RackSolutions 2U Secure Wall Mount Rack allows you to securely mount your equipment in 1U-2U of rackable space horizontally or vertically. You can prevent unauthorized access to your equipment by locking the rack cover in place with a rear lock bar and padlock (customer supplied). The rack supports network devices and equipment up to 3.5" inches (88.9 mm) and is compatible with most OEM slide rails including Dell, HP, IBM, Apple, Sun, Intel, Cisco, Juniper and 3Com. The angle brackets are adjustable in location, allowing various lengths of slide rails (customer supplied) to be attached. Compatible with round hole, threaded hole, and square hole equipment and slides.

Our rack mount bracket is a perfect solution for small or home offices. In environments where a server rack is too much or there's just not enough room, this wall mount can flush mount your 19" equipment vertically to the wall or horizontally to the bottom of a desk. With up to a 200lb load capacity, can handle everything from switches and patch panels to heavy servers. Any equipment mounted horizontally must be attached with two brackets so that there are four areas of support. This vertical wall mount rack works with standard 19" server, networking, and telecommunications equipment from Dell, HP, IBM, Apple, Sun, Intel, Cisco, Juniper, 3Com and more.

RackSolutions' center mounted configurable 2Post rack shelves can be adjusted to fit a wide variety of mounting needs. The shelf's mounting position can be adjusted along the attachment ears using the holes along the sides of the shelf. Slots for equipment straps are also found along the side of the rack, which can be used for securing equipment to the shelf. The flanges, or equipment stops, can be adjusted along the entire length of the shelf in 1" increments, or removed altogether. This 2 post rack shelf has a shelf depth of 20 inches (508 mm) and a weight capacity of 150 lbs (68 kgs), making it perfect for mounting a large variety of electronic equipment in a 2 post rack that might not ordinarily rack mountable. Our relay rack shelves are compatible with any Standard EIA 19" 2 post relay or telecommunications rack.