Accessories

The Atlas Sound MS-12CE is an all-purpose ebony finished stand featuring durable tubing, the famous Atlas Sound® wearproof clutch, and a 10" dia. die cast low profile circular base. The three-piece clutch provides positive locking control and is able to withstand years of stage and studio handling. The base features edge concentrated weight distribution and is equipped with rubber pads to absorb shock and protect floor surfaces.

The 5/8" and 7/8" dia. tubing is fully adjustable with a vertical extension ranging from 35" to 63". Tubing is manufactured of cold rolled steel and terminates in the industry standard 5/8" - 27 thread suitable for microphone clamps and accessories. Top and bottom lock-nut rings are included for versatile and secure positioning. Model MS-10CE is finished in ebony epoxy to eliminate
reflections caused by high-intensity lighting. This durable epoxy finish will with stand the rigors of repeated use and frequent transportation.

MS20E heavy-duty microphone stand provides extra stability, extends from 37" to 66" , and is suitable for indoor/outdoor use. The unit features an integral air suspension system to protect sensitive microphones from damage if clutch is released too quickly. Tubing is manufactured of 7/8" and 1 1/8" dia. cold rolled steel. The entire MS20E assembly is finished in non-reflective ebony epoxy.

The PA702-RMK is a rack mount kit that provides mounting capability for several Atlas Sound half width rack amplifiers in standard 19" equipment racks. The PA702-RMK works with amplifier models PA702, PA702-W, PA1001G, MA40G, MA60G, PA40G, PA60G, and DPA-102PM. The PA702-RMK includes hardware to mount one of these amplifier models individually or two of these amplifiers side by side in the same rack space.

The PPR2 22-gauge CRS perforated panel provides for natural air circulation and dissipation of equipment-generated heat in 19" wide equipment cabinets. The PPR2 is formed on four sides to achieve flush appearance.

AtlasIED offers the SD72W-KIT4 to make ordering a complete solution easy for in-ceiling speaker applications. The kit includes products that have been selected to work perfectly together in BGM and paging applications.

SD72W-KIT4 includes:

• SD72W 8" Dual Cone In-Celing Speaker with 25V/70V 5-Watt Transformer and 62-8 Baffle (Qty 4)
• CS95-8 8" Recessed Round Stacking Enclosure (Qty 4)
• 81-8R 8" T-Bar Tile Bridge (Qty 4)
• 18-2PX100 100' 18 Guage 2-Conductor Speaker Wire

The speaker used in the SD72W is the next generation of Atlas high performance cone speakers, very similar to the preceding C-Series speakers. The similarity in the sonic qualities ensures that contractors and designers who have worked with the AtlasIED C-Series in the past will know exactly what to expect when they use the SD72W.

Model SD72W is a dual cone, 25 watt 8" (205mm) speaker with a 10oz. (260g) ceramic magnet. It includes a curvilinear, treated paper cone for lower harmonic distortion. The speaker is also equipped with a full 1" diameter copper voice coil with a black anodized aluminum former for better power dissipation. Package includes factory installed 25/70.7V line matching transformer with tap selections ranging from .25 to 5 watts.

Model SD72W operates within a frequency response range of 45Hz - 19kHz (nominal) with a sensitivity of 97dB and a dispersion angle of 105°.

The SD72W includes a factory installed CRS baffle with concealed speaker mounting studs and includes screw mount hardware. The SD72W baffle features standard mounting holes to accommodate the majority of AtlasIED 8" tile bridges, mounting rings and enclosures.

The CS95-8 enclosure is furnished with four combination conduit knockouts 1/2" - 3/4" (13-19mm), four J-clips and two flexible perforated mounting straps. One-piece CRS construction, undercoated, patch-jute lined, and finished in epoxy.

The 81-8R tile bridge features a round cut-out designed to work with the CS95-8 enclosure. The unit is constructed of 24-gauge CRS with an electrogalvanized rust-resistant finish.