Accessories

The SHS-TB is designed for use with the SHS-6T2 strategically hidden speaker in applications with ceiling tile or material that is less than 0.5" (13mm) thick. This bridge kit ensures the diffuser can properly attach to the SHS with no gap at the ceiling tile.

The AtlasIED TSD-RMK is designed to rack mount up to 4 TSD Series modules is a industry standard 19" 1RU rack space.

AtlasIED VTB Series Models are environment-resistant speakers designed for intercom communication. VTB Models feature an integral exponential horn to provide reliable sound distribution and optimum intelligibility for the reproduction of voice and/or electric tone signals. Units have a frequency response of 600Hz - 55kHz, and are offered in six models to meet application requirements. Series Models VTB-1 and VTB-2 are 8 and 4 ohm units, respectively. Models VTB-3 through VTB-6 are equipped with a built-in transformer. Termination is via 6" color coded leads. Units are of die-cast zinc construction with a water-sealed driver that will withstand moisture, corrosion, vibration, vermin, and vandalism. Models are available with a selection of multi-tap transformers and are designed to mount a variety of standard or custom housings and face plates to meet installation and application requirements. VTB Series units provide years of trouble-free service in stationary or mobile applications both indoors or outdoors.

The ZSERIES-RMK is a rack mount kit designed for mounting the Z2-B or Z4-B acoustical systems in an equipment rack. The unit takes up 4 rack units of space and allows access to the front panel controls as well as allowing the unit to tilt open for easy acces to internal connections.

The WMA Series wall cabinets are 16- gauge, welded with 18" deep center-section and adjustable mounting rails, and a 4-1/2" deep rear section. Panel space openings range from 10 RU to 35 RU. Cabinets are equipped with provisions for custom cabinet mounting, wire man?agement, equipment mounting, and structural support.

Cabinets are finished in a black electrostatic powder coat.

All models include adjustable front rack rails tapped 10-32, and manufactured to standard E.I.A. 1/2" spacing. Hat channels provide adjustable rack rail support with securing holes for fixed positioning of rails. Top and Bottom removable 3RU panels are located in the center section of the cabinet for EFP Series fan panels for further ventilation or for isolation panels for power.