Accessories

This versatile desk mount is the perfect tablet stand for retail transactions, school tutoring, hospitality counters, or any place you need the ability to fully tilt your tablet to face the opposite direction. The sturdy metal base can be permanently mounted to any horizontal surface via pre-drilled holes, but is also heavy enough for use even without screwing it down. This kit comes complete with an included Paragon Enclosure, which keeps tablets protected with a secure lock-and-key system. It attaches to the desk mount via a standard VESA mounting plate, which rotates for use in either portrait or landscape orientation. A pre-drilled hole through the center of the mount allows the added protection of a Kensington Cable, to loop and lock to a table leg, wall pipe or other permanent fixture (not included). Compatible with 7-11" tablets.

• Heavy-duty white metal A-frame base
• Portrait/Landscape orientation flexibility
• Allows a quick way to flip tablet for use by a second person
• Perfect for home, office, reception desks, waiting rooms, retail stores, and more
• Enclosure connects via 75 x 75-millimeter or 100 x 100-millimeter VESA mount
• Heavy-duty locking enclosure

This versatile arm mount combines a generous set of joints and pivot points with a sturdy hard plastic build to make your tablet the centerpiece of your digital workspace. The perfect addition to a classroom, conference room, or doctor's office, this remarkable arm installs easily to a desk, countertop, or table, using the adjustable scratch-protected C-clamp mounting system. Customize your setup with 360-degree rotating pivot arm base and at the flexible holder connection. The tablet holder attaches to the end of the arm at another tilting joint and rotates 360 degrees for portrait and landscape orientations.

• Sturdy metal clamp fits onto desks up to 2 ?".
• Angle-adjustable arm with flexible elbow joint
• 360-degree rotation points at arm base and elbow joint
• Tablet holder tilts at two axes and rotates 360 degrees for portrait and landscape orientations

• Height adjustable up to 16" , arm extends 24".
• C-clamp installation system
• Tool-Free assembly
• Compatible with 7-13-inch tablets, including iPad 10.2-inch (7th & 8^th Generation), iPad Air Gen. 4 (2020), 12.9-inch iPad Pro (2020), 11-inch iPad Pro (2020), iPad mini, iPad Air, Surface Pro 7 and more

This sturdy arm mount combines a generous set of adjustments, joints, and pivot points with a convenient clamp that transforms any counter, desk, or table into a versatile digital workspace. The arm installs easily using an adjustable scratch-protected C-clamp. The VESA plate at the top is ready to attach to any of CTA's VESA-mount tablet enclosures or other compatible cases.

The mount features a full 90-degree rotation for use in either landscape or portrait orientation. The spring-loaded elbow joint adjusts 180-degrees. To create the perfect work angle, simply loosen the mid joint with the included Allen wrench, position, and tighten. The base joint rotates 135-degrees to facilitate just the right viewing angle. At the base of the mount, you'll find a handy USB extension port for easy charging while in use. Just plug the attached USB cables into a computer or other power source, then plug your tablet directly into the base of the stand. Interior cable routing system within the arms gives ample space to keep cords out of site.

• 75 x 75-millimeter and 100 x 100-millimeter VESA plate easily connects to any VESA-compatible mount
• VESA plate rotates 90-degrees for use in both landscape and portrait orientations
• Elbow joint tilts a full 180-degrees and locks in place with Allen wrench (included)
• Base rotates 135-degrees
• C-clamp adjusts to any table or surface from 0.39- to 3.14-inches total thickness
• Interior cable routing system allows neat storage of cables while in use
• Fits most 17-32-inch devices or monitors
• Supports up to 19.8 pounds
• USB 3.0 ports create convenient charging

This sturdy arm mount combines a generous set of adjustments, joints, and pivot points with a convenient clamp that transforms any counter, desk, or table into a versatile digital workspace. The arm installs easily using an adjustable scratch-protected C-clamp. The VESA plate at the top is ready to attach to any of CTA's VESA-mount tablet enclosures or other compatible cases.

The mount features a full 90-degree rotation for use in either landscape or portrait orientation. The spring-loaded elbow joint adjusts 180-degrees. To create the perfect work angle, simply loosen the mid joint with the included Allen wrench, position, and tighten. The base joint rotates 135-degrees to facilitate just the right viewing angle. At the base of the mount, you'll find a handy USB extension port for easy charging while in use. Just plug the attached USB cables into a computer or other power source, then plug your tablet directly into the base of the stand. Interior cable routing system within the arms gives ample space to keep cords out of site.

• 75 x 75-millimeter and 100 x 100-millimeter VESA plate easily connects to any VESA-compatible mount
• VESA plate rotates 90-degrees for use in both landscape and portrait orientations

• Elbow joint tilts a full 180-degrees and locks in place with Allen wrench (included)
• Base rotates 135-degrees
• C-clamp adjusts to any table or surface from 0.39- to 3.14-inches total thickness

• Interior cable routing system allows neat storage of cables while in use
• Fits most 17-32-inch devices or monitors
• Supports up to 19.8 pounds
• USB 3.0 ports create convenient charging

This sturdy arm mount and enclosure combines a generous set of adjustments, joints, and pivot points, convenient clamp, and universal tablet holder that transforms any counter, desk, or table into a versatile digital workspace. The universal enclosure works with virtually all 7-13-inch tablets. The stylish diagonal grip allows easy access to all plugs, headphone jacks, ports, or credit card readers. A convenient and powerful lock and key system deters theft. The adjustable grip and exchangeable foam pads allow this universal wall mount to hold any device you want, with or without a protective case. The arm installs easily using an adjustable scratch-protected C-clamp. The mount features a full 90-degree rotation for use in either landscape or portrait orientation. The spring-loaded elbow joint adjusts 180-degrees. To create the perfect work angle, simply loosen the mid joint with the included Allen wrench, position, and tighten. The base joint rotates 135-degrees to facilitate just the right viewing angle. At the base of the mount, you'll find a handy USB extension port for easy charging while in use. Just plug the attached USB cables into a computer or other power source, then plug your tablet directly into the base of the stand. Interior cable routing system within the arms gives ample space to keep cords out of site.