Accessories

Mobile Mark's LTM501 Series Multiband Diversity/MIMO antenna contains five separate antennas, all in one compact antenna housing: two LTE 700 MHz & Cellular antennas, two dual-band WiFi antennas, and one GPS antenna.

MIMO (multiple-input-multiple-output) modems offer greater speed and capacity than earlier generations of modems. They achieve this by sending RF signals on multiple antenna elements to maximize the amount of information transmitted and received. To ensure optimum performance, the systems need multiple antennas on both the transmission and receive ends.

With 5-elements, the new LTM antenna is ideal for fleet management systems that combine GPS with both an LTE MIMO modem as well as WiFi MIMO modem.

Measuring 5.5" (140mm) in diameter with a low profile of 2.38" (60.4mm), LTM series antennas take up significantly less space than multiple antennas. The radome is available in either black or white. The antennas are available in either surface mount or mag-mount models. The antennas can also be configured for combined GPS & Glonass use.

Mobile Mark's LTM602 Series Multiband Diversity/MIMO antenna contains six separate antennas, all in one compact antenna housing: two Global Cellular (up to 3.7 GHz) antennas, three dual-band WiFi antennas, and one GPS antenna.

MIMO (multiple-input-multiple-output) modems offer higher speed and capacity. By sending RF signals on multiple antenna elements to maximize the amount of information transmitted and received. To ensure optimum performance, the systems need multiple antennas elements on both the transmission and receive ends. The LTM combines these elements in one housing.

With 6-elements, the new lTM antenna is ideal for fleet management systems that combine GPS with both a Global Cellular 2x MIMO modem as well as a WiFi 3x MIMO Modem. Measuring 5.5" (140mm) in diameter with a low profile of 2.38" (60.4mm), LTM series antennas take up signifi cantly less space than multiple antennas. The radome is available in either black or white. The antennas can also be configured for combined GPS & Glonass use.
This antenna is not available as a mag-mount.

Mobile Mark's LTM502 Series Multiband Diversity/MIMO antenna contains five separate antennas, all in one compact antenna housing: two broadband LTE/Cellular antennas, two dual-band WiFi antennas, and one GPS antenna. The LTM502 differs from the LTM501 in that the broadband LTE/Cellular element covers all LTE frequencies worldwide, from 694-3700 MHz.

Both WiFi and LTE MIMO (multiple-input-multiple-output) modems offer greater speed and capacity than earlier generations of modems. To ensure optimum performance, the systems need multiple antennas on both the transmission and receive ends.

With 5-elements, the new LTM502 antenna is ideal for fleet management systems that combine GPS with both any Global LTE MIMO modem as well as WiFi MIMO modem.

Measuring 5.5" (140mm) in diameter with a low profile of 2.38" , the LTM series antennas take up significantly less space than multiple antennas and cut down on installation time and costs by offering a single mounting hole. The antennas are available in either surfacemount or mag-mount and can also be configured for combined GPS & Glonass use.

Mobile Mark's GPS Magnet Mount Antennas complements MobileMark's full range of GPS Mobile antennas with a convenient and portable mounting option. The magnet mount style allows the antennas to be moved from from car-to-car, and its small size makes it easy to transport.

The antenna design is very small, less than 2 inches (5 cm) overall,but still contains a small powerful magnet. The magnet can be attached to the roof, hood or trunk of any metal vehicle or flat surface. The cable would then be routed to the GPS receiver, typically through a vehicle window.

The antenna provides durability and weatherproofing, using a sealed polycarbonate case. When not in use, the antenna can easily be removed.

Although the antenna could be mounted on any surface, the antenna should ideally be placed on metal at least 5" (127 mm) across. This will provide the maximum GPS operation.

GPS performance is provided by a 26 dB low noise amplifier, with 5dBi of antenna gain. Power required for the GPS amplifier is either2.7 or 5 VDC. The power is supplied through the cable along with the GPS signal. Most GPS receivers will provide the needed power for the amplifier circuit without modifications.

The antenna is rated IPx5 for water ingress protection. The standard cable supplied with the Magnet Mount antenna is 10 feet (3 meters)of RG-174. Standard connector supplied is an SMA Plug (Male).

Different connectors can be supplied if requested, please consult your sales representative for availability.

Additional Mobile Mark GPS antennas include Surface Mount and Window Mount.

MultiBand antennas that combine GPS with other wireless applications are also available in a wide variety of mounting styles including additional Mag-mount options.

The MGW-303 features 3 elements in one antenna radome, measuring 4.2" D x 3.7" H (107 mm x 94 mm).

Two elements are typically used for WiFi MIMO (multiple-input-multiple-output). Other applications may devote one of the cables to WiFi leaving the additional antenna element available for other wireless applications such as Public Safety at 4.9 GHz, Military at 4.4 GHz or DSRC at 5.9 GHz.

This rugged antenna can be mounted to any vehicle, cargo container or trailer.

The antennas are available in either surface-mount or mag-mount models. The antennas can also be configured for combined GPS & Glonass use, specify a "G" after the prefix "MGW".